C9300-48P-A
48 x 10/100/1000 PoE+ copper ports
C9200-48P-A
48 x 1G PoE+ RJ-45
Cisco switch comparison
C9300-48P-A vs C9200-48P-A
A key difference between Cisco C9300-48P-A and C9200-48P-A is Access / Downlink Ports: C9300-48P-A — 48 x 10/100/1000 PoE+ copper ports; C9200-48P-A — 48 x 1G PoE+ RJ-45. They also differ in Uplink Interfaces (Modular uplink bay; network module ordered separately vs Modular uplink bay) and Maximum Uplink Speed (40 Gbps vs 25 Gbps). Consider how access / downlink ports affects the deployment, then review the remaining differences before choosing the exact Product ID. The table below shows 68 specifications available for both models. Confirm licenses, accessories, power supplies and regional suffixes before ordering.
2models compared
68specs shown for every model
45differences found
Change comparison
Select different models
At-a-glance comparison
Key performance and configuration differences
Start with the differences that have the greatest effect on capacity, connectivity, software, power and deployment fit.
C9300-48P-A
Modular uplink bay; network module ordered separately
C9200-48P-A
Modular uplink bay
C9300-48P-A
40 Gbps
C9200-48P-A
25 Gbps
C9300-48P-A
256 Gbps
C9200-48P-A
176 Gbps
C9300-48P-A
736 Gbps
C9200-48P-A
336 Gbps
C9300-48P-A
190.47 Mpps
C9200-48P-A
130.95 Mpps
Buying decision
How to choose between C9300-48P-A and C9200-48P-A
Review the differences in this order to identify the model that best fits the intended deployment.
-
01
Ports and uplinks
Match access media, port count and speed first, then confirm that the uplink design fits the distribution layer.
-
02
PoE and power
Total the power required by connected devices and verify the PoE standard, budget, power supplies and redundancy.
-
03
Performance and software
Compare forwarding, stacking and scale in the intended topology, then confirm the license tier and software release.
Before ordering
Confirm the exact Product ID, license tier, power supplies, accessories and regional requirements.
Free product-selection help
Need help deciding between these Cisco models?
Send your port, performance, license, quantity or deployment requirements. A CCIE-level network engineer will review the shortlist and help identify the better-fit Product ID.
Detailed comparison
Full specification comparison
| Comparison parameter | ||
|---|---|---|
| Product ID | C9300-48P-A | C9200-48P-A |
| Product and ordering | ||
| Product Type | Cisco Catalyst 9300 Series modular-uplink stackable access switch | Cisco Catalyst 9200 Series modular-uplink stackable access switch |
| Form Factor | 1RU | 1RU |
| Switch Role | Campus access switch | Campus access switch |
| Network License | Network Advantage | Network Advantage |
| Configuration, licensing and management | ||
| Management Model | Cisco Catalyst Center, WebUI, CLI, NETCONF, RESTCONF and SNMP | Cisco Catalyst Center, WebUI, CLI, NETCONF, RESTCONF and SNMP |
| Ports and interfaces | ||
| Downlink Port Count | 48 | 48 |
| Access / Downlink Ports | 48 x 10/100/1000 PoE+ copper ports | 48 x 1G PoE+ RJ-45 |
| Downlink Type | 1G PoE+ RJ-45 | 1G PoE+ RJ-45 |
| Uplink Interfaces | Modular uplink bay; network module ordered separately | Modular uplink bay |
| Maximum Uplink Speed | 40 Gbps | 25 Gbps |
| Supported Network Modules | C9300-NM-4G, C9300-NM-4M, C9300-NM-8X and C9300-NM-2Q | C9200-NM-2Y, C9200-NM-4G or C9200-NM-4X network modules |
| Management Ports | 10/100/1000 Ethernet management, RJ-45 console, and USB mini-Type B console | 1 x 10/100/1000BASE-T dedicated management port |
| Console Ports | 1 x RJ-45; 1 x USB Mini-B console | 1 x RJ-45; 1 x USB Mini-B console |
| USB Ports | 1 x USB 2.0 Type-A host port | 1 x USB 2.0 Type-A host port |
| PoE-capable Ports | 48 | 48 |
| Connector Types | RJ-45 10/100/1000BASE-T copper access ports | RJ-45; SFP/SFP+; USB |
| Total System Ports | 56 | 52 |
| Performance and scale | ||
| Switching Capacity (Standalone) | 256 Gbps | 176 Gbps |
| Switching Capacity (Stacked) | 736 Gbps | 336 Gbps |
| Forwarding Rate (Standalone) | 190.47 Mpps | 130.95 Mpps |
| Forwarding Rate (Stacked) | 547.62 Mpps | 250 Mpps |
| MAC Address Scale | 32,000 | 32,000 |
| IPv4 Route Scale | 32,000 | 14,000 |
| IPv6 Route Scale | 16,000 | 2,000 |
| Multicast Route Scale | 8,000 | 1,000 |
| VLAN Scale | 4,094 | 4,094 |
| ACL Scale | 5,120 | 1,600 |
| QoS Scale | 5,120 | 1,000 |
| Packet Buffer | 16 MB | 6 MB |
| Jumbo Frame Size | 9,198 bytes | 9,198 bytes |
| Flexible NetFlow Entries | 64,000 | 16,000 |
| Switched Virtual Interfaces | 1,000 | 512 |
| PoE and power | ||
| PoE Support | PoE/PoE+ | PoE/PoE+ |
| PoE Standard | IEEE 802.3at PoE+ | IEEE 802.3af / 802.3at |
| Default PoE Budget | 437 W | 740 W |
| Maximum PoE Budget | Up to 1,440 W | 1,440 W |
| Default Power Supply | PWR-C1-715WAC-P, 715W AC | PWR-C6-1KWAC |
| Power Supply Slots | 2 | 2 |
| Power Supply Options | 715W default; 1100W AC upgrade; second power-supply slot supported | Compatible C5/C6 AC supplies; supported DC supply on PoE models |
| Maximum System Power | 128 W | 74.39 W |
| AC Input Voltage | 100 to 240 V | 100 to 240 V |
| AC Input Frequency | 50 to 60 Hz | 50 to 60 Hz |
| Power Input Type | AC input; supported AC/HVDC options depend on power-supply model | AC input; optional DC power supplies on supported modular and fixed-uplink PoE models |
| Heat Dissipation | 2,440 BTU/h | 254 BTU/h |
| Power Redundancy | Dual redundant field-replaceable power supplies | Redundant power with an optional second compatible supply |
| Stacking and resiliency | ||
| Stacking Technology | StackWise-480 | StackWise-160 |
| Stack Bandwidth | 480 Gbps | 160 Gbps |
| Maximum Stack Members | Up to 8 | 8 |
| StackPower | Cisco StackPower | Not applicable |
| Fan Modules | 3 field-replaceable fans with N+1 redundancy | Fixed redundant fans |
| Memory and software | ||
| Operating System | Cisco IOS XE | Cisco IOS XE |
| Minimum Software Release | Cisco IOS XE 16.5.1a | Cisco IOS XE 16.9.2 |
| DRAM | 8 GB | 4 GB |
| Flash Memory | 16 GB | 4 GB |
| CPU | x86 CPU complex | Not listed |
| Physical and environmental | ||
| Dimensions (H × W × D) | 43.942 × 444.5 × 449.58 mm | 44 × 445 × 391 mm |
| Weight | 7.589 kg | 5.5 kg |
| Operating Temperature | -5 to 45 °C; -5 to 40 °C | -5 to 45 °C; -5 to 40 °C |
| Storage Temperature | -40 to 70 °C | -40 to 70 °C |
| Operating Humidity | 5% to 90% | 5% to 90% |
| Operating Altitude | Up to 3,048 m | Up to 3,048 m |
| MTBF | 277,770 hours | 375,570 hours |
| Warranty | Cisco Enhanced Limited Lifetime hardware warranty (E-LLW) | Cisco Enhanced Limited Lifetime hardware warranty (E-LLW) |
| Acoustic Rating | 45 dB LpA typical; 48 dB LpA maximum | 42 dBA typical; 45 dBA maximum |
| Environmental Compliance | RoHS 5 | RoHS compliant |
| Safety Certifications | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1 | UL/CSA 60950-1; EN/IEC 60950-1 |
| EMC Certifications | FCC Part 15, EN 55032 Class A, CISPR 32 Class A, ICES-003 Class A | FCC Part 15 Class A; EN 55032 Class A; CISPR 32 Class A; ICES-003 Class A |
| Mounting | 19-inch rack mount | 19-inch rack mount |
| Airflow | Front-to-back airflow | Front-to-back airflow |
“Not listed” means that no confirmed value is currently available for that model and parameter.
Price, stock & lead time
Get pricing for the exact models you compared
Use the exact Product ID when requesting a quote, because suffixes can identify different licenses, regions or configurations. Open an available product page for details and pricing, or request a project quote from our team.
Browse all Cisco switchesRelated comparisons