Can C9200-48P-A be stacked?

Yes, C9200-48P-A joins a StackWise-160 stack of up to 8 C9200 switches that run the same license level. The stack needs C9200-STACK-KIT, which is ordered separately, plus STACK-T4-1M or STACK-T4-3M for longer runs.

What does Network Advantage on C9200-48P-A include?

Network Advantage on C9200-48P-A adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set. The order needs a matching Advantage 48-port subscription, such as C9200-DNA-A-48, and a Smart Account.

What happens to C9200-48P-A ports if one PWR-C6-1KWAC fails with all 48 ports at 30W?

If the second power supply is removed while every port draws full PoE+ power, ports 25 to 48 lose power. The two supplies allocate the combined PoE pool to all ports, and one supply covers only part of it. Keep the average draw within the single-supply budget if the switch must run on one supply.

Does C9200-48P-A reserve system power before it allocates PoE from the PWR-C6-1KWAC?

Yes. C9200-48P-A reserves 260W of the supply for the switch itself, which leaves the 740W PoE budget. The PWR-C6-1KWAC outputs 54V at 16.5A, per the Catalyst 9200 data sheet and hardware installation guide. Treat the 260W as unavailable to endpoints when planning the closet load.

Does C9200-48P-A support MACsec-256 with Network Advantage?

No. C9200-48P-A supports MACsec-128 only. MACsec-256 requires Network Advantage, but on Catalyst 9200 only the C9200CX models implement it, so the -A license on C9200-48P-A does not add it. Catalyst 9300 and larger platforms support 256-bit MACsec with Network Advantage, so plan 256-bit link encryption there.

Does the Umbrella DNS connector on C9200-48P-A need Network Advantage?

Yes. The Umbrella native connector forwards DNS requests from the switch to Cisco Umbrella and needs the Cisco DNA Advantage subscription. It is rated at about 200 flows per second and is available on Catalyst 9200 from IOS XE 16.12. C9200-48P-A is the Network Advantage variant, so it carries the entitlement.

Can C9200-48P-A share a stack with the fixed-uplink C9200L-48P-4G-A?

No. Cisco does not support C9200 and C9200L in one stack, because StackWise-160 and StackWise-80 differ in bandwidth. The data sheet lists 4 GB DRAM for C9200 and 2 GB for C9200L, with matching differences in MAC capacity. C9200-48P-A can stack with other C9200 variants when the license level matches.

Can C9200-48P-A run with one failed fan?

Yes, for a limited time. Per the Catalyst 9200 hardware installation guide, C9200-48P-A tolerates -5 to +45 C at up to 3000 m with one failed fan, for at most 96 consecutive hours. The limit is 360 hours or 15 occurrences per year. Replace the failed fan module before those limits are reached.

Does installing a cold-patch SMU on C9200-48P-A interrupt traffic?

Yes. A software maintenance update (SMU) installed as a cold patch on C9200-48P-A needs a reload, which interrupts traffic while the switch restarts. A hot patch applies without a reload. Schedule cold patches inside a maintenance window and keep hot patches for changes that cannot take an outage.

What sound level does C9200-48P-A reach with all PoE+ ports loaded?

C9200-48P-A measures 42 dB typical and 45 dB maximum sound pressure (LpA) with AC power and the PoE+ ports loaded. The values are measured to ISO 7779 and declared to ISO 9296. Consider this when the switch sits in an occupied office floor instead of a ventilated closet.

C9200-48P-A – 48x1G PoE+ Ports – Modular Uplink – 740W PoE Budget – Network Advantage

Name: C9200-48P-A - Cisco Catalyst 9200 48-Port PoE+ Network Advantage Switch
Brand: Cisco
SKU: C9200-48P-A
Price: 3580.78 USD
Availability: InStock
Rating: 5.00 (14 reviews)

Brand: Cisco Category: Catalyst 9200 Switches Model: C9200-48P-A

Rated 5 out of 5 based on 14 customer ratings

5.014 reviews10 Questions4 sold this month

List Price: ~~$10,558.70~~ 66% OFF

$3,580.78

Price Alert

In StockShips in as little as 1 business day Brand New

Related models

Cisco SN CheckSN verification before shipment.Verify authenticity3-Year WarrantyExtended, enterprise-gradeWarranty terms14-Day ReturnsStraightforward RMA processReturn policyExpress Shipping2-6 Business Daysvia UPS, FedEx, DHL and more

Trusted & Secure Payments

Shop Expert-Recommended Accessories for the C9200-48P-A

Explore optics, stacking accessories, modules, and power supplies—all verified by our engineers for use with this model.

SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMF
Original price was: $853.95.Current price is: $52.00.
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4
Original price was: $1,213.85.Current price is: $91.68.
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMF
Original price was: $2,439.88.Current price is: $150.00.
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km Reach
Original price was: $4,873.66.Current price is: $149.00.
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOM
Original price was: $1,260.58.Current price is: $95.80.
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m Reach
Original price was: $570.10.Current price is: $70.00.
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOM
Original price was: $633.46.Current price is: $59.00.
GLC-EX-SMD
1000BASE-EX SFP - 40km SMF - DOM
Original price was: $2,527.49.Current price is: $205.00.
GLC-ZX-SMD
1000BASE-ZX SFP - 70km SMF - EXT DOM
Original price was: $5,061.30.Current price is: $215.70.
C9200-STACK-KIT
StackWise-160 Bandwidth - 2 Adapters and Cable - Catalyst 9200 Stack Kit
Original price was: $1,628.51.Current price is: $445.00.
STACK-T4-50CM
50 cm Data Stack Cable - Catalyst 9200 and 9200L Stack Kit Default - StackWise-160/80
Original price was: $143.20.Current price is: $66.00.
STACK-T4-1M
1 m Data Stack Cable - Catalyst 9200 and 9200L - StackWise-160/80
Original price was: $277.26.Current price is: $146.00.
STACK-T4-3M
3 m Type 3 Stacking Cable - Catalyst 9200 and 9200L - StackWise-160/80
Original price was: $415.89.Current price is: $194.00.
C9200-NM-4G
4x1G SFP Uplinks - Network Module - Catalyst 9200 Modular Switches
Original price was: $657.40.Current price is: $256.00.
C9200-NM-4X
4x10GE SFP+ Ports - Catalyst 9200 Module
Original price was: $2,578.21.Current price is: $658.00.
PWR-C6-1KWAC
1KW AC PSU - Catalyst 9200 48-Port PoE Switches
Original price was: $2,495.33.Current price is: $475.00.

Why Layer23-Switch

Stocked, Shipped and Supported by One Team

Founded

Customers

Units shipped

Countries

Inventory You Can See

Cisco stock on hand

Models ready to ship

Warehouse space

Ships in 1 Business Day

In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.

DHL FedEx UPS Duties included: US · CA · UK

LSCare Warranty

3years on enterprise equipment

Advance replacement for in-stock models
New unit for dead-on-arrival
14-day returns on sealed items

Free CCIE Support

Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.

Part number check Configuration Troubleshooting

Verify Before You Pay

100%factory-sealed

Get label and serial photos before shipment, and check every serial number with Cisco.

C9200-48P-A Description

The C9200-48P-A is a Cisco Catalyst 9200 Series modular-uplink stackable access switch for dense wiring closets that power phones, cameras and access points. The switch has 48 1G PoE+ ports, a modular uplink slot, a 740W PoE budget on the default PWR-C6-1KWAC and 176 Gbps of switching capacity. The -A suffix carries Network Advantage, which adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set.

Quick Specs

Parameter	Specification
Product ID	C9200-48P-A
Product type	Modular-uplink stackable PoE+ access switch
Downlink ports	48 x 1G PoE+ copper ports
Uplink bay	1 modular network-module slot
Supported uplink modules	C9200-NM-4G, C9200-NM-4X, C9200-NM-BLANK
Network license	Network Advantage
Stacking architecture	StackWise-160
Stack bandwidth	160 Gbps
Switching capacity	176 Gbps standalone; 336 Gbps with stacking
Forwarding rate	130.95 Mpps standalone; 250 Mpps with stacking
Default power supply	PWR-C6-1KWAC
Default PoE budget	740W with one PWR-C6-1KWAC
Expanded PoE budget	1440W with a second PWR-C6-1KWAC

Product Performance

Switching Capacity (Standalone)

Switching Capacity With Stacking

Forwarding Rate (Standalone)

Key Features

Routing And Segmentation At The Access Layer

Network Advantage adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set, so department or tenant routing can end at the closet instead of at the distribution layer.

1440W PoE With Two Supplies

The default PWR-C6-1KWAC leaves 740W for PoE, about 15W per port across 48 ports. A second PWR-C6-1KWAC raises the budget to 1440W, which is 30W on every one of the 48 ports.

Uplink Module Choice

The single uplink slot takes the C9200-NM-4G for four 1G ports or the C9200-NM-4X for four 1G/10G ports, and a C9200-NM-BLANK keeps airflow intact when no uplink is fitted. Uplink speed is a module choice, so a closet can start on 1G and move to 10G without replacing the switch.

StackWise-160 Stacking

Up to eight C9200 switches of the same license level join one StackWise-160 stack at 160 Gbps. The stack acts as a single switch with up to 384 access ports and sub-50 ms failover.

Field-Replaceable Power And Fans

Both power supplies and the fan modules are field-replaceable, so a failed unit is swapped at the rack without removing the switch from service in the closet.

DC Supply Option

The PWR-C6-715WDC= supply gives 485W of PoE alone and 970W as a pair, and it can sit beside an AC supply as primary and backup. It is a spare-part supply that needs Cisco IOS XE 17.8.1 or later.

Application Scenarios

High-Density Powered Floor

A large office floor with many phones, cameras and access points can terminate all of them on one switch, with PoE+ on each of the 48 ports.

Multi-Department Segmentation

In a closet that serves several departments, the switch separates their traffic with VRF-lite or VXLAN before it reaches the distribution switch.

Routed Access With First-Hop Redundancy

Where the access layer runs EIGRP or IS-IS and terminates HSRP, the switch handles first-hop routing locally instead of forwarding everything at Layer 2.

Product Comparison

Parameter	C9200-48P-A	C9200-48P-E	C9200-24P-A	C9200L-48P-4G-A
Downlinks total 10/100/1000 or PoE+ copper ports	48 ports full PoE+	48 ports full PoE+	24 ports full PoE+	48 ports full PoE+
Uplink configuration	Modular uplink options	Modular uplink options	Modular uplink options	4 x 1G SFP fixed
Default power supply	PWR-C6-1KWAC	PWR-C6-1KWAC	PWR-C6-600WAC	PWR-C5-1KWAC
Default available PoE power with single primary power supply	740W	740W	370W	740W
Maximum PoE power with additional secondary power supply	1440W	1440W	740W	1440W
Network license	Network Advantage	Network Essentials	Network Advantage	Network Advantage
Stacking bandwidth support	StackWise-160, 160 Gbps	StackWise-160, 160 Gbps	StackWise-160, 160 Gbps	StackWise-80, 80 Gbps
Switching capacity	176 Gbps	176 Gbps	128 Gbps	104 Gbps
Switch capacity with stacking	336 Gbps	336 Gbps	288 Gbps	184 Gbps

C9200-48P-A is the 48-port PoE+ Network Advantage model of this group: it differs from C9200-48P-E only in license, since both carry 740W of PoE on one PWR-C6-1KWAC, 1440W on two, and 176 Gbps standalone switching. Sites that do not need VRF, VXLAN or EIGRP can order C9200-48P-E, and an Essentials switch can be raised later with a C9200-LIC= term (C9200-48-E-A-3, -5 or -7), which cannot go on the switch order. Closets with 24 or fewer powered drops can use C9200-24P-A at 370W and 128 Gbps. Uplinks fixed at 4 x 1G SFP are available on C9200L-48P-4G-A at the same 740W, but it stacks on StackWise-80, drops to 104 Gbps standalone and cannot take uplink modules.

PoE Power Planning

Planning Item	Value or Check
Default power supply	PWR-C6-1KWAC (1000W AC)
Default PoE budget	740W across 48 PoE+ ports with one PWR-C6-1KWAC installed
Expanded PoE budget	1440W with a second PWR-C6-1KWAC, matching 48 ports x 30W PoE+
PoE standard	802.3at PoE+ up to 30W per port, with Perpetual PoE and Fast PoE
DC power alternative	PWR-C6-715WDC= (spare-only, IOS XE 17.8.1 or later): 485W PoE with one supply, 970W with two
Device count check	Confirm total endpoint draw against the 740W single-supply budget before relying on one power supply

Ordering Checklist

Subscription: Select a matching Advantage 48-port term, such as C9200-DNA-A-48 or C9200-DNX-A-48-3Y. The hardware suffix sets the tier, CCW defaults to a 3-year Cisco DNA term that must match it, and a Smart Account is mandatory on every Catalyst 9200 order.
Uplink module: Select one of C9200-NM-4G (4 x 1G), C9200-NM-4X (4 x 1G/10G) or C9200-NM-BLANK; C9200-NM-2Y and C9200-NM-2Q do not apply. The modular bay ships without a chosen uplink speed, so a module or blank must fill it.
Second power supply: A second PWR-C6-1KWAC is optional; PWR-C6-715WDC= is spare-only. One supply gives 740W of PoE; two give 1440W.
Stack kit: Add C9200-STACK-KIT (two stack adapters and one cable) plus STACK-T4-50CM, STACK-T4-1M or STACK-T4-3M for longer runs. Stacking is an optional line in CCW, and C9200L-STACK-KIT is the kit for fixed-uplink models only.
Power cord: Select a CAB-TA cord for the destination country, such as CAB-TA-NA=, CAB-TA-EU= or CAB-TA-UK=. AC power supplies need a cord selected in CCW.

Optional Add-ons

Add-on	Description
C9200-NM-4G	4 x 1G SFP uplink network module for modular Catalyst 9200 switches
C9200-NM-4X	4 x 1G/10G SFP+ uplink network module
C9200-NM-BLANK	Blank module that preserves airflow when no uplink module is installed
PWR-C6-1KWAC	Second 1000W AC power supply raising the PoE budget from 740W to 1440W
PWR-C6-715WDC=	Spare-only 715W DC power supply (IOS XE 17.8.1 or later), usable alongside an AC supply
C9200-STACK-KIT	StackWise-160 stack kit with two data stack adapters and one data stack cable (ordered separately)
STACK-T4-1M / STACK-T4-3M	Longer stacking cable options beyond the default 0.5m STACK-T4-50CM

Catalyst 9200L Access Layer Switch Rear Panel

The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.

1	RJ-45 console port	4	Blue Beacon LED
2	Fixed fan modules on C9200L switches	5	MGMT (RJ-45 10/100/1000 management port)
3	Power supply module slots	6	StackWise-80 port connectors

Catalyst 9200L Access Layer Switch Components Delivered in the Shipping Box

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

1	Cisco Catalyst 9200 Series switch¹ (power supply modules are not displayed)	8	Cable guide
2	AC power cord	9	M4.0 x 20mm Phillips pan-head screw
3	Four rubber mounting feet	10	RJ-45 USB console cable¹
4	Two 19-inch mounting brackets	11	(Optional) USB console cable ¹
5	4 number-12 pan-head screw	12	(Optional) StackWise cable¹ (0.5-meter, 1-meter, or 3-meter)
6	4 number-10 pan-head screws	13	Power cord retainer
7	8 number-8 Phillips flat-head screws	–	–

Specifications

Parameter	Specification	Parameter	Specification
Product ID	C9200-48P-A	Network license	Network Advantage
Minimum software release	Cisco IOS XE Gibraltar 16.10.1	Downlink ports	48 x 10/100/1000 Mbps PoE+ copper ports
Network module slot	1 modular network-module slot	Supported network modules	C9200-NM-4G, C9200-NM-4X, C9200-NM-BLANK
Console port	RJ-45 or mini-USB console	Management port	1 x Ethernet management RJ-45 port
Switching capacity	176 Gbps	Forwarding rate	130.95 Mpps
Switching capacity with stacking	336 Gbps with StackWise-160	Forwarding rate with stacking	250 Mpps with StackWise-160
Packet buffer	6 MB	DRAM	4 GB
Flash	4 GB	MAC addresses	32,000 entries
VLAN IDs	4,094	Switched virtual interfaces	512
IPv4 routes	4,000 entries (14,000 IPv4 routes with ARP + learned)	IPv6 routes	2,000 entries
Multicast routes	1,000 entries	ACL entries	1,600 entries
QoS entries	1,000 entries	Flexible NetFlow entries	16,000 flows
Virtual networks	4	Jumbo frames	9,198 bytes
Stacking	StackWise-160, 160 Gbps, up to 8 members	Stacking kit	C9200-STACK-KIT; STACK-T4-50CM (default), STACK-T4-1M or STACK-T4-3M stack cables
Default power supply	PWR-C6-1KWAC 1000W AC	Power supply slots	2 slots (second supply optional)
Power supply options	PWR-C6-715WDC= DC (spare only, IOS XE 17.8.1 or later)	AC input voltage	100-240 VAC
AC input frequency	50-60 Hz	Power connector	IEC 320-C16
Heat dissipation	3,412 BTU/hr at 1000W output	Default PoE budget	740W
PoE budget with other supplies	1440W with a second PWR-C6-1KWAC; 485W with one PWR-C6-715WDC=, 970W with two	PoE standards	802.3at PoE+ up to 30W per port
Fan modules	2 field-replaceable fan modules	Acoustic noise	42 dB LpA typical / 45 dB LpA max (48-port PoE+ group, AC power, loaded)
Dimensions (H x W x D)	1.73 x 17.5 x 15.4 in. (4.4 x 44.5 x 39.1 cm) with fan FRUs and power supplies	Operating temperature	-5°C to 45°C up to 1,500 m; -5°C to 40°C up to 3,000 m
Storage temperature	-40°C to 70°C	Operating humidity	5% to 90% noncondensing
Operating altitude	Up to 3,000 m (10,000 ft)	MTBF	375,570 hours
Safety certifications	IEC/UL/CSA/EN 60950-1 and 62368-1, Class I Equipment	EMC certifications	FCC 47 CFR Part 15, CISPR 32 Class A, EN 55032 Class A, ICES-003 Class A (and related regional standards)
Environmental compliance	RoHS 5

Quality Certifications

Customer Reviews

Write A Review

5.0

Rated 5.00 out of 5

(14 reviews)

5 Stars

4 Stars

3 Stars

2 Stars

1 Stars

Evelyn Müller

Posted on 27/04/2026

Verified Buyer

Rated 5 out of 5

5.0

We reported a minor packaging concern. They acknowledged it and adjusted for our next order.

Mei Moore

Posted on 02/04/2026

Verified Buyer

Rated 5 out of 5

5.0

Our CFO noticed the savings compared to our previous vendor.

Janice Smith

Posted on 19/03/2026

Verified Buyer

Rated 5 out of 5

5.0

Layer23 has set a benchmark in our vendor evaluations.

Neo

Posted on 20/06/2025

Verified Buyer

Rated 5 out of 5

5.0

Whoa. Delivery was fast.

DC Manager

Posted on 15/02/2025

Verified Buyer

Rated 5 out of 5

5.0

High value order. Your team handled the insurance and tracking perfectly.

Questions & Answers

Can C9200-48P-A be stacked?
Yes, C9200-48P-A joins a StackWise-160 stack of up to 8 C9200 switches that run the same license level. The stack needs C9200-STACK-KIT, which is ordered separately, plus STACK-T4-1M or STACK-T4-3M for longer runs.
What does Network Advantage on C9200-48P-A include?
Network Advantage on C9200-48P-A adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set. The order needs a matching Advantage 48-port subscription, such as C9200-DNA-A-48, and a Smart Account.
What happens to C9200-48P-A ports if one PWR-C6-1KWAC fails with all 48 ports at 30W?
If the second power supply is removed while every port draws full PoE+ power, ports 25 to 48 lose power. The two supplies allocate the combined PoE pool to all ports, and one supply covers only part of it. Keep the average draw within the single-supply budget if the switch must run on one supply.
Does C9200-48P-A reserve system power before it allocates PoE from the PWR-C6-1KWAC?
Yes. C9200-48P-A reserves 260W of the supply for the switch itself, which leaves the 740W PoE budget. The PWR-C6-1KWAC outputs 54V at 16.5A, per the Catalyst 9200 data sheet and hardware installation guide. Treat the 260W as unavailable to endpoints when planning the closet load.
Does C9200-48P-A support MACsec-256 with Network Advantage?
No. C9200-48P-A supports MACsec-128 only. MACsec-256 requires Network Advantage, but on Catalyst 9200 only the C9200CX models implement it, so the -A license on C9200-48P-A does not add it. Catalyst 9300 and larger platforms support 256-bit MACsec with Network Advantage, so plan 256-bit link encryption there.
Does the Umbrella DNS connector on C9200-48P-A need Network Advantage?
Yes. The Umbrella native connector forwards DNS requests from the switch to Cisco Umbrella and needs the Cisco DNA Advantage subscription. It is rated at about 200 flows per second and is available on Catalyst 9200 from IOS XE 16.12. C9200-48P-A is the Network Advantage variant, so it carries the entitlement.
Can C9200-48P-A share a stack with the fixed-uplink C9200L-48P-4G-A?
No. Cisco does not support C9200 and C9200L in one stack, because StackWise-160 and StackWise-80 differ in bandwidth. The data sheet lists 4 GB DRAM for C9200 and 2 GB for C9200L, with matching differences in MAC capacity. C9200-48P-A can stack with other C9200 variants when the license level matches.
Can C9200-48P-A run with one failed fan?
Yes, for a limited time. Per the Catalyst 9200 hardware installation guide, C9200-48P-A tolerates -5 to +45 C at up to 3000 m with one failed fan, for at most 96 consecutive hours. The limit is 360 hours or 15 occurrences per year. Replace the failed fan module before those limits are reached.
Does installing a cold-patch SMU on C9200-48P-A interrupt traffic?
Yes. A software maintenance update (SMU) installed as a cold patch on C9200-48P-A needs a reload, which interrupts traffic while the switch restarts. A hot patch applies without a reload. Schedule cold patches inside a maintenance window and keep hot patches for changes that cannot take an outage.
What sound level does C9200-48P-A reach with all PoE+ ports loaded?
C9200-48P-A measures 42 dB typical and 45 dB maximum sound pressure (LpA) with AC power and the PoE+ ports loaded. The values are measured to ISO 7779 and declared to ISO 9296. Consider this when the switch sits in an occupied office floor instead of a ventilated closet.

Warranty

100% Low Price Guarantee:

Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.

100% Quality Assurance:

All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.

Free CCIE Technical Support:

Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.

100% Money Back Guarantee:

If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.

Flexible & Secure Payment and Shipping:

We support multiple secure payment and logistics options, backed by industry-leading verification:

Visit How to Pay page for more information

Warranty Coverage & RMA Instructions

Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information

FREE NETWORK TOOLS

Verify, plan, and comparewith confidence

Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Check lifecycle dates

Cisco Switch Selector Tool

Filter Cisco switches by ports, uplinks, PoE, performance, features, license, and budget.

Find matching switches >

Cisco Serial Number Lookup

Verify authenticity and identify exactmodel, coverage, and lifecycle detailsusing a Cisco serial number.

Verify a serial number >

Product Comparison

Compare specifications, capabilitiesand form factors side-by-side tochoose the right hardware.

Cisco Compare products >

DataSheet Downloads

C9200-48P-A Datasheet

Item	Qty	Amount
C9200-48P-ANew, factory-sealed · 3-year warranty · In stock
C9200-DNA-ARequired with each C9200-48P-A

C9200-48P-A – 48x1G PoE+ Ports – Modular Uplink – 740W PoE Budget – Network Advantage

Shop Expert-Recommended Accessories for the C9200-48P-A

Stocked, Shipped and Supported by One Team

Inventory You Can See

Ships in 1 Business Day

LSCare Warranty

Free CCIE Support

Verify Before You Pay

C9200-48P-A Description

Quick Specs

Product Performance

Key Features

Application Scenarios

Product Comparison

PoE Power Planning

Ordering Checklist

Optional Add-ons

Catalyst 9200L Access Layer Switch Rear Panel

Catalyst 9200L Access Layer Switch Components Delivered in the Shipping Box

Specifications

Quality Certifications

Customer Reviews

Questions & Answers

Can C9200-48P-A be stacked?

What does Network Advantage on C9200-48P-A include?

What happens to C9200-48P-A ports if one PWR-C6-1KWAC fails with all 48 ports at 30W?

Does C9200-48P-A reserve system power before it allocates PoE from the PWR-C6-1KWAC?

Does C9200-48P-A support MACsec-256 with Network Advantage?

Does the Umbrella DNS connector on C9200-48P-A need Network Advantage?

Can C9200-48P-A share a stack with the fixed-uplink C9200L-48P-4G-A?

Can C9200-48P-A run with one failed fan?

Does installing a cold-patch SMU on C9200-48P-A interrupt traffic?

What sound level does C9200-48P-A reach with all PoE+ ports loaded?

Warranty

Verify, plan, and comparewith confidence

Cisco Switch Selector Tool

Cisco Serial Number Lookup

Product Comparison

DataSheet Downloads

Related Searches of Catalyst 9200 Switches