Cisco Catalyst IE3200 Rugged Series Switches deliver compact Gigabit industrial access for harsh locations that need secure IOS XE operation, DIN-rail mounting, fiber uplinks, PoE or non-PoE models, and resilient OT connectivity. Buyers compare IE3200 with IE3100, IE3300, and IE3400 when balancing cost, port density, PoE budget, and industrial feature requirements.
Showing all 2 results
8×1G PoE+ Ports – 2×1G SFP Uplinks – Network Essentials
8×1G Data Ports – 2×1G SFP Uplinks – Network Essentials
Catalyst IE3200 switches are used for rugged Gigabit access in manufacturing, energy, transportation, mining, warehouses, smart cities, and outdoor enclosures. They connect industrial controllers, cameras, sensors, phones, and wireless devices where hardened operation and secure management are required.
Common IE3200 models provide compact 10-port designs with eight Gigabit copper downlinks and two SFP uplinks. Buyers should verify the exact PID because PoE, fiber, accessories, software, and power options determine whether the model fits the cabinet design.
Yes, PoE-capable IE3200 models are available and can provide power for industrial cameras, phones, access points, and sensors. The total PoE budget, power supply sizing, input voltage, and temperature conditions must be checked before ordering.
IE3100 is typically selected for compact Layer 2 industrial edge access. IE3200 provides rugged Gigabit access with IOS XE, fiber uplinks, and PoE options for broader industrial deployments. Choose by port requirement, power budget, management, and protocol support.
IE3200 is a compact rugged access switch, while IE3300 offers more modularity and higher-end industrial options on selected models. If the site needs expansion modules, 10G uplinks, or higher PoE capability, IE3300 may be the better comparison.
IE3200 is commonly associated with Network Essentials feature coverage for rugged access. Before buying, confirm the exact software image, Cisco IOS XE release, required industrial protocols, and whether additional management or support entitlements are needed.
Yes, IE3200 is designed for harsh and extended enterprise environments, including outdoor enclosures when the cabinet, power, grounding, surge protection, fiber, and temperature design meet requirements. Always validate environmental ratings against the installation site.
IE3200 supports industrial network resiliency features, but the exact protocols and behavior depend on software release and feature set. Validate REP, MRP, STP, or other ring requirements before selecting the model for production OT networks.
IE3200 can be considered for modernization of older rugged access switches, but replacement requires a feature-by-feature check. Compare port media, PoE, power input, alarm wiring, protocols, mounting, certifications, software, and the connected industrial system requirements.
Verify exact IE3200 PID, PoE or non-PoE choice, SFP uplinks, DC power supply, temperature range, DIN-rail mounting, alarms, industrial certifications, software release, ring protocol needs, spare storage, lifecycle status, and OT device compatibility.
Cisco Catalyst IE3200 Rugged Switches are fanless, DIN-rail industrial Ethernet switches that deliver up to 10 Gigabit Ethernet ports — 8 copper RJ-45 downlinks plus 2 SFP fiber uplinks — in a compact, hardened form factor. Running Cisco IOS XE with secure boot, image signing, and a Cisco Trust Anchor module, the IE3200 Series is built for OT edge access in factory automation, transportation, energy, mining, smart cities, warehouses, and outdoor industrial cabinets where standard enterprise switches are not suitable.
This category is for procurement teams, system integrators, and solution providers sourcing Cisco IE3200 rugged switches for industrial access, field-cabinet connectivity, PoE edge devices, fiber uplink deployments, and OT network expansion. These switches are chosen where compact size, Gigabit performance, secure operation, and stable industrial connectivity are required.
Layer23 Switch supplies two compact 10-port Cisco Catalyst IE3200 models — one PoE and one non-PoE — both with 8 Gigabit copper ports, 2 Gigabit SFP uplinks, and the Network Essentials feature set: IE-3200-8T2S-E and IE-3200-8P2S-E.
| Cisco PID | Copper ports | PoE | SFP uplinks | Software |
|---|---|---|---|---|
| IE-3200-8T2S-E | 8 x 1G RJ-45 | Non-PoE | 2 x 1G SFP | IOS XE, Network Essentials |
| IE-3200-8P2S-E | 8 x 1G RJ-45 | PoE / PoE+ | 2 x 1G SFP | IOS XE, Network Essentials |
Choose the IE-3200-8P2S-E when field devices need power and data over one cable — IP cameras, wireless access points, sensors, or IP phones — because it delivers PoE/PoE+ on its 8 copper ports, drawing from an IE3200 system PoE budget of up to 240W shared across those 8 ports. Choose the IE-3200-8T2S-E when endpoints are independently powered and you only need rugged Gigabit data access, which reduces power-supply sizing and cabinet cost. Both models share the same 8 copper + 2 SFP layout and the Network Essentials feature set, so the PoE decision is the primary differentiator.
Cisco Catalyst IE3200 switches suit distributed industrial networks that need reliable access switching close to machines, controllers, sensors, cameras, and access points. Their hardened design makes them a practical fit for sites with demanding temperature, vibration, cabinet-space, or uptime requirements.
| Application | Typical requirement |
|---|---|
| Factory automation | Gigabit DIN-rail switching for PLCs, controllers, HMIs, machine tools, and production cells |
| Industrial PoE devices | Network and power for IP cameras, sensors, wireless access points, phones, and access devices |
| Transportation systems | Rugged Ethernet access for traffic cabinets, roadside systems, stations, and distributed infrastructure |
| Warehouses and logistics | Industrial switching for scanners, wireless coverage, automation equipment, and edge connectivity |
| Energy, mining, and outdoor cabinets | Hardened Gigabit access for monitoring systems, field equipment, and harsh-location enclosures |
For PoE deployments on the IE-3200-8P2S-E, confirm the number of powered endpoints, total PoE/PoE+ load against the system budget, power-supply capacity, and the installation environment — this matters most for IP cameras, wireless access points, sensors, and access-control devices that depend on stable power delivery.
For fiber-connected sites, confirm the required SFP uplink type, fiber distance, cable plant, uplink redundancy plan, and SFP compatibility. The two 1G SFP uplinks are commonly used between control cabinets, production zones, outdoor enclosures, and upstream aggregation switches.
Before purchasing a Cisco Catalyst IE3200 rugged switch, review the full project requirement: exact Cisco PID, quantity, PoE demand, SFP uplink plan, DC power input, operating environment, mounting space, grounding design, software requirement, hardware condition, and delivery destination. For maintenance or expansion work, match the required PID to the existing site design — confirming the exact model up front reduces installation risk, avoids wrong-part purchases, and keeps industrial projects on schedule.
Layer23 Switch supplies Cisco Catalyst IE3200 Rugged Switches for factory automation, transportation, warehouses, energy and mining networks, smart-city infrastructure, outdoor enclosures, and OT edge access. Contact us for current Cisco IE3200 price, stock, factory-sealed availability, lead time, shipping cost, and project-based quotations.
Need help confirming the right model? Send us the part number, quantity, PoE load, uplink type, fiber distance, cabinet environment, destination country, and target delivery date, and our team will check availability and provide a project quotation. Backed by CCIE-certified engineering and 12+ years of supply-chain experience, with global shipping options including EXW, FOB, DAP, and DDP.
Notifications