Browse Cisco 10G optical modules for SFP+ switch, router, firewall, and data center links where reach, fiber type, connector, platform support, and transceiver condition decide compatibility. Compare SR, LR, ER, ZR, LRM, copper DAC, AOC, DOM support, coding, optics lifecycle, spare planning, lead time, and exact Cisco part numbers before ordering.
Showing 1–12 of 24 results
10G SFP+ AOC – 10m Length – Active Optical Cable
10G SFP+ AOC – 1m Length – Active Optical Cable
10G SFP+ AOC – 2m Length – Active Optical Cable
10G SFP+ AOC – 3m Length – Active Optical Cable
10G SFP+ AOC – 5m Length – Active Optical Cable
10G SFP+ AOC – 7m Length – Active Optical Cable
10GBASE-ER SFP+ – 1550nm SMF – 40km Reach
10GBASE-ER SFP+ – Industrial Temp – 40km SMF
10GBASE-ER SFP+ – S-Class – 40km SMF
10GBASE-LR SFP+ – 1310nm SMF – 10km Reach
10GBASE-LR SFP+ – S-Class – 10km SMF
10GBASE-LR SFP+ – Extended Temp – 10km SMF
Cisco 10G Optical Modules are used to create 10 Gigabit Ethernet links between compatible Cisco switches, routers, firewalls, servers, and data center platforms. They are selected by form factor, reach, fiber type, connector, and platform compatibility.
Choose by matching the Cisco platform, port type, required distance, fiber type, connector, optical standard, and software support. The exact Cisco part number matters because similar 10G modules can support different reach, cabling, or platform combinations.
SR is typically used for short multimode fiber links, while LR, ER, and ZR are used for longer single-mode fiber distances. Buyers should confirm the actual link distance, optical budget, fiber plant, and compatible Cisco platform before choosing.
No. Cisco 10G SFP+ modules only work in supported ports and software combinations. Always check the Cisco compatibility matrix, platform release notes, and exact SKU before assuming a transceiver will be accepted.
Use optical modules for fiber runs and structured cabling, DAC for short copper connections inside or between nearby racks, and AOC for short active optical links. The best choice depends on distance, cable pathway, power use, and port support.
Verify whether the link uses multimode or single-mode fiber and whether the module requires LC, copper, or another supported connection. Connector mismatch, wrong fiber type, or unsupported patch cords can prevent a good 10G link.
Many Cisco 10G modules support digital optical monitoring, but support depends on the exact module and platform. DOM is useful for checking transmit power, receive power, temperature, and troubleshooting weak or unstable fiber links.
They can be mixed only when each platform supports the exact optic and software release. A transceiver that works in one Cisco switch may not be supported in another router, firewall, or older platform.
Common causes include unsupported optics, wrong fiber type, dirty connectors, excessive distance, polarity issues, damaged patch cords, optical power mismatch, or software compatibility limits. Start troubleshooting with the exact SKU and platform compatibility.
Verify the exact Cisco part number, form factor, reach, wavelength, fiber type, connector, platform support, software compatibility, DOM needs, condition, warranty, and lead time. These details matter more than speed alone.
Cisco 10G Optical Modules are often the practical choice when a network needs a reliable step up from 1G without jumping straight to 25G or 100G. They are widely used for switch uplinks, server connectivity, access-layer aggregation, and fiber handoffs where 10 Gigabit Ethernet remains the right balance of cost, speed, and compatibility. This category is built for buyers who need to match Cisco 10G transceivers to existing switches or routers, confirm fiber and connector requirements, and request pricing, availability, and lead time before placing an order.
Notifications