Cisco Catalyst 1000 Series Switches are fixed Layer 2 access switches for small offices, retail sites, and branch closets that need secure 1G wired connectivity without enterprise stacking complexity. They fit buyers comparing C1000 8, 16, 24, and 48 port models, PoE+ budgets, 1G or 10G uplinks, SFP support, and migration from older Catalyst 2960 access switches.
Showing all 9 results
16x1G Data Ports – 2x1G SFP Uplinks – Fanless Access Switch
24x1G PoE+ Ports – 4x1G SFP Uplinks – 195W PoE Budget
24x1G PoE+ Ports – 4x10G SFP+ Uplinks – 195W PoE Budget
24x1G Data Ports – 4x1G SFP Uplinks – Fanless Catalyst 1000
24x1G Data Ports – 4x10G SFP+ Uplinks – Fanless Catalyst 1000
48x1G PoE+ Ports – 4x1G SFP Uplinks – 370W PoE Budget
48x1G PoE+ Ports – 4x10G SFP+ Uplinks – 370W PoE Budget
48x1G Data Ports – 4x1G SFP Uplinks – Catalyst 1000
48x1G Data Ports – 4x10G SFP+ Uplinks – Catalyst 1000
Catalyst 1000 switches are used as fixed access switches for small business, retail, classroom, and branch networks. They connect PCs, printers, IP phones, cameras, and access points where the site needs managed Cisco switching but does not need stacking or advanced Catalyst 9000 campus features.
Catalyst 1000 is primarily a Layer 2 managed switch family. It supports common access features such as VLANs, trunking, security controls, QoS, and management interfaces, but buyers needing dynamic routing, advanced segmentation, or campus automation usually compare Catalyst 1200, 1300, 9200, or 9300 options.
No. Catalyst 1000 switches are fixed standalone switches and do not provide physical stacking. If the buying intent includes one logical switch across multiple units, shared management, or stack redundancy, compare Catalyst 1300 for SMB stacking or Catalyst 9200 and 9300 for enterprise StackWise designs.
PoE+ support depends on the exact Catalyst 1000 SKU. Common buying choices include partial-PoE and full-PoE 8, 16, 24, and 48 port models. Confirm the port count, total PoE budget, uplink type, and power supply before ordering, especially for IP cameras or wireless access points.
C1000 models with 4G uplinks provide Gigabit SFP uplinks, while 4X models provide 10G SFP+ uplinks on supported SKUs. Choose 4G for basic access closets and 4X when the switch uplinks to a 10G aggregation, firewall, or distribution switch.
Catalyst 1000 is commonly bought for simpler deployments because it does not use the same Cisco DNA or Catalyst Center subscription model as higher Catalyst 9000 access switches. Still, verify the included software image, support contract, and management expectations for the exact SKU and region.
Catalyst 1000 is often considered for smaller 2960 replacement projects when the requirement is fixed 1G access, PoE+, secure management, and familiar Cisco operation. For larger refreshes needing stacking, redundant power, automation, or long-term campus standardization, Catalyst 9200 or 9300 may be a better fit.
Yes, PoE-capable Catalyst 1000 models can power many IP phones, cameras, and wireless access points. The key is matching the endpoint power draw against the switch's total PoE budget and per-port capability, because partial-PoE and full-PoE models serve different density requirements.
Catalyst 1000 fits traditional fixed Layer 2 access. Catalyst 1200 targets simple small-business switching with easier management, while Catalyst 1300 adds stronger SMB features such as stacking on selected models and broader Layer 3 options. The right choice depends on stacking, routing, management, and lifecycle requirements.
Verify port count, PoE budget, uplink speed, SFP compatibility, rack or desktop mounting, software image, support coverage, regional power cord, lifecycle status, and whether the site will later need stacking or enterprise Catalyst 9000 features.
Cisco Catalyst 1000 Switches provide simple, reliable Gigabit connectivity for small business and branch networks. With fanless options, PoE support, and easy web-based management, the Catalyst 1000 Series is ideal for offices, retail, and light enterprise deployments.
Notifications