C9200L-48T-4X-A – 48x1G Data Ports – Fixed 4x10G Uplinks – Network Advantage
Cisco C9200L-48T-4X-A Compatible Accessories, Modules & Spare Parts
Find compatible network modules, power supplies, fans, optics, cables and spare parts for the Cisco C9200L-48T-4X-A. These accessories support fiber connectivity, hardware replacement, spare inventory and network maintenance projects.-
SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMFOriginal price was: $1,870.01.$52.00Current price is: $52.00. Condition: New Factory Sealed -
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4Original price was: $2,658.11.$71.68Current price is: $71.68. Condition: New Factory Sealed -
SFP-10G-SR-X
10GBASE-SR SFP+ - Extended Temp - 400m OM4 MMFOriginal price was: $3,785.89.$1,020.00Current price is: $1,020.00. Condition: New Factory Sealed -
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMFOriginal price was: $5,342.92.$150.00Current price is: $150.00. Condition: New Factory Sealed -
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km ReachOriginal price was: $10,672.47.$170.00Current price is: $170.00. Condition: New Factory Sealed -
SFP-10G-LR-X
10GBASE-LR SFP+ - Extended Temp - 10km SMFOriginal price was: $11,206.77.$306.00Current price is: $306.00. Condition: New Factory Sealed -
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOMOriginal price was: $2,658.11.$95.80Current price is: $95.80. Condition: New Factory Sealed -
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m ReachOriginal price was: $1,202.16.$70.00Current price is: $70.00. Condition: New Factory Sealed -
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOMOriginal price was: $1,335.73.$57.00Current price is: $57.00. Condition: New Factory Sealed -
GLC-EX-SMD
1000BASE-EX SFP - 40km SMF - DOMOriginal price was: $5,329.57.$205.00Current price is: $205.00. Condition: New Factory Sealed
Established Global IT Distributor
With over a decade of industry experience, we are a certified Cisco Partner delivering genuine enterprise networking hardware and trusted services to system integrators, ISPs, and enterprises worldwide.
C9200L-48T-4X-A Description
The C9200L-48T-4X-A is a Cisco Catalyst 9200L fixed-uplink stackable access switch built around 48 non-PoE copper data ports and the Network Advantage license tier, aimed at closets and equipment rooms where the connected gear draws no PoE power but the design still needs Advantage-tier routing and segmentation local to the access layer. Four fixed uplink ports run at 1G or 10G over SFP/SFP+ optics without a modular network-module bay, so the uplink media is locked in at the factory rather than decided later through a slot. A single default PWR-C5-125WAC supply covers the switch, and a second identical supply can be added purely for power redundancy since this model carries no PoE budget to expand. Switching capacity reaches 176 Gbps standalone and rises to 256 Gbps once the switch joins a StackWise-80 stack of up to eight C9200L members forming one virtual switch, and Network Advantage on this hardware layers EIGRP, HSRP, IS-IS, and VRF-lite, VXLAN, and LISP segmentation over the Layer 2 and Routed Access base that Network Essentials already covers on the identical C9200L-48T-4X-E hardware.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C9200L-48T-4X-A |
|
Product type |
Fixed-uplink stackable data access switch |
|
Access ports |
48 x 10/100/1000 Mbps data copper ports |
|
Uplink ports |
4 x 1/10G fixed SFP/SFP+ uplink ports |
|
Network license |
Network Advantage |
|
Default power supply |
PWR-C5-125WAC |
|
Default power supply wattage |
125W AC |
|
Power supply slots |
2 slots |
|
Fan design |
2 fixed fans |
|
Stacking architecture |
StackWise-80 |
|
Switching capacity |
176 Gbps standalone; 256 Gbps with stacking |
|
Forwarding rate |
130.95 Mpps standalone; 190 Mpps with stacking |
|
Minimum software release |
Cisco IOS XE Fuji 16.9.2 |
Product Performance
Key Features
Network Advantage adds EIGRP, HSRP, IS-IS, and VRF-lite, VXLAN, and LISP segmentation over the Network Essentials base, so a 48-port closet that only terminates data endpoints can still enforce routing and tenant boundaries locally rather than pushing every decision to a distribution switch.
The 4X model places four 1/10G SFP/SFP+ uplinks directly on the chassis rather than in a modular bay, so the uplink decision is locked in at order time and does not depend on a separate network-module line item.
Up to eight C9200L-48T-4X switches join an 80 Gbps StackWise-80 ring that behaves as a single virtual switch with sub-50ms stateful failover, keeping a growing 48-port closet under one management plane without stepping up to the C9200 modular-uplink line.
Because this model carries no PoE budget, a second PWR-C5-125WAC only buys power-supply redundancy against a single unit failing; it does not raise any power ceiling the way it would on a PoE+ variant.
The switch runs CLI/Web UI on the base Network Stack tier and adds Catalyst Center or Meraki dashboard management once a Cisco Catalyst or Cisco DNA subscription is attached, independent of the fixed 4x10G uplink hardware.
Every unit carries a passive RFID tag for barcode-free asset scans and a beacon LED visible from both ends of the chassis to flag a specific stack member, cutting down on manual serial-number checks during an inventory audit or a rack visit in a dense 48-port closet.
Application Scenarios
Deployed where 48 copper ports terminate desktops, printers, or other equipment that draws no PoE, while the Network Advantage tier still enforces VRF-lite or VXLAN segmentation at the access layer instead of relying entirely on an upstream distribution switch.
Installed where the uplink media is already settled on 10G SFP+ and does not need to change later, so the fixed 4x10G uplink ports replace a modular network-module decision entirely.
Added as an additional member in an existing StackWise-80 ring of C9200L-48T-4X switches to extend non-powered port count across a floor or wing under a single management plane.
Product Comparison
|
Parameter |
C9200L-48T-4X-A | |||
|---|---|---|---|---|
|
Access ports |
48 x 1G data copper ports |
24 x 1G data copper ports |
48 x 1G PoE+ copper ports |
48 x 1G data copper ports |
|
Uplink architecture |
4 x 1/10G fixed uplink ports |
4 x 1/10G fixed uplink ports |
4 x 1/10G fixed uplink ports |
Modular network-module bay |
|
Network license |
Network Advantage |
Network Advantage |
Network Advantage |
Network Advantage |
|
Default power supply |
PWR-C5-125WAC |
PWR-C5-125WAC |
PWR-C5-1KWAC |
PWR-C6-125WAC |
|
Default PoE budget |
No PoE |
No PoE |
740W with one supply |
No PoE |
|
Expanded PoE budget |
No PoE |
No PoE |
1440W with a second supply |
No PoE |
|
Stacking architecture |
StackWise-80 |
StackWise-80 |
StackWise-80 |
StackWise-160 |
|
Switching capacity |
176 Gbps standalone; 256 Gbps with stacking |
128 Gbps standalone; 208 Gbps with stacking |
176 Gbps standalone; 256 Gbps with stacking |
176 Gbps standalone; 336 Gbps with stacking |
|
Forwarding rate |
130.95 Mpps standalone; 190 Mpps with stacking |
95.23 Mpps standalone; 155 Mpps with stacking |
130.95 Mpps standalone; 190 Mpps with stacking |
130.95 Mpps standalone; 250 Mpps with stacking |
|
Minimum software release |
Cisco IOS XE Fuji 16.9.2 |
Cisco IOS XE Fuji 16.9.2 |
Cisco IOS XE Fuji 16.9.2 |
Cisco IOS XE Gibraltar 16.10.1 |
- Stepping down to C9200L-24T-4X-A halves the access port count to 24 and drops standalone switching capacity from 176 Gbps to 128 Gbps while keeping the identical fixed 4x10G uplink layout and Network Advantage tier, a fit only once the non-powered port count for the closet is confirmed to stay near 24 rather than 48.
- C9200L-48P-4X-A keeps the same 48-port count, uplink layout, switching capacity, and forwarding rate but swaps the 125W supply for a PWR-C5-1KWAC that unlocks a 740W PoE budget (1440W with a second supply); that step only pays off once the ports are confirmed to power phones, cameras, or access points, since C9200L-48T-4X-A carries no PoE budget to fall back on.
- Moving to C9200-48T-A trades the fixed 4x10G uplinks for a modular network-module bay (C9200-NM-4G or C9200-NM-4X) and lifts stacking from StackWise-80 to StackWise-160, raising stacked switching capacity from 256 Gbps to 336 Gbps; that flexibility only matters when the uplink media might change after the order or the stack needs to grow past the 80 Gbps ring, since both models share the same 176 Gbps standalone capacity and Network Advantage tier.
- For deciding which SKU to order, settle the PoE requirement first, since only C9200L-48P-4X-A adds a power budget in this group; then size the port count against C9200L-24T-4X-A; and last decide whether the uplink media needs to stay open-ended after the order, which is the line separating the fixed-uplink C9200L-48T-4X-A from the modular-bay C9200-48T-A at the same 48-port, non-PoE scale.
Selection Guide
1. Advantage Premium Needs A Segmentation Use Case
Network Advantage on the C9200L-48T-4X-A pairs with a 48-port Advantage-tier subscription such as C9200L-DNA-A-48 or C9200L-DNX-A-48-3Y/5Y/7Y; identical hardware ordered as C9200L-48T-4X-E carries Network Essentials instead, and since Cisco publishes no in-place upgrade PID between the two tiers, a design that only needs the Essentials-tier Layer 2 and Routed Access base can take the C9200L-48T-4X-E at the lower license cost rather than paying for Advantage segmentation features it will not use.
2. Powered Endpoint Requirement Routes To C9200L-48P-4X-A
When even a portion of the 48 downlink ports is expected to power an IP phone, camera, or access point, C9200L-48P-4X-A carries the identical fixed 4x10G uplink layout and switching capacity on a PWR-C5-1KWAC supply that adds a 740W PoE budget; staying on C9200L-48T-4X-A only holds while every downlink is confirmed to terminate non-powered equipment, since this hardware has no PoE budget to fall back on later.
3. Uplink Flexibility Trade Against The Modular C9200-48T-A
C9200-48T-A delivers the same 48 non-powered ports and the same 176 Gbps standalone switching capacity but places the uplink in a modular network-module bay instead of fixing it at 4x10G, and it steps stacking up to StackWise-160; taking the fixed-uplink C9200L-48T-4X-A gives up that later uplink-media flexibility and the larger stack ring in exchange for a simpler single-PID order once the 10G uplink choice is already settled.
4. Port Count Step Down To The 24-Port Sibling
Once the non-powered access footprint for a closet is confirmed to run near or under 24 ports rather than the full 48, C9200L-24T-4X-A carries the identical fixed 4x10G uplink layout and Network Advantage tier at a lower standalone switching capacity; staying on C9200L-48T-4X-A only makes sense once the port count is expected to fill closer to the 48-port ceiling.
Ordering Checklist
|
Check Item |
What to Confirm |
Why It Matters |
|---|---|---|
|
Exact license suffix |
C9200L-48T-4X-A carries Network Advantage; the -E suffix on identical hardware carries Network Essentials |
The perpetual Network Stack tier is fixed by the hardware PID and cannot be license-upgraded in place |
|
Matching subscription tier |
An Advantage-tier term subscription from the 48-port group, such as C9200L-DNA-A-48 or C9200L-DNX-A-48-3Y/5Y/7Y |
Every Catalyst 9200L order requires a matching-tier Cisco DNA or Cisco Catalyst subscription under a mandatory Smart Account |
|
Stack kit inclusion |
C9200L-STACK-KIT plus stack members at the same license level |
The kit is not included by default, and StackWise-80 members must share the license tier and cannot mix with C9200 modular-uplink switches |
|
Second power supply |
Whether a second PWR-C5-125WAC is needed for redundancy |
This model has no PoE budget, so a second supply only protects against a single-unit failure and does not raise any power ceiling |
|
Uplink optics compatibility |
The SFP or SFP+ optics selected for the fixed 1/10G uplinks are on the Cisco TMG Compatibility Matrix for this platform |
An unlisted optic may be rejected by the fixed uplink port even if the form factor fits |
|
Power cord selection |
A country-specific CAB-TA cord rated for the 125W supply class (10A) |
An under-rated or wrong-plug cord blocks power-up at installation |
|
Software baseline |
Cisco IOS XE Fuji 16.9.2 or later |
16.9.2 is the platform introductory release for C9200L hardware, and earlier releases cannot run it |
Optional Add-ons
|
Add-on |
Description |
|---|---|
|
Second 125W AC power supply for redundancy (this model carries no PoE budget to expand) | |
|
StackWise-80 stack kit with two data stack adapters and one data stack cable (ordered separately) | |
|
Longer StackWise data stack cables in place of the default 50 cm cable | |
|
RACK-KIT-T1= |
19/23/24-inch or ETSI Type 1 rack mount kit |
|
4PT-KIT-T2= |
Four-point wall or rack mount kit |
Catalyst 9200L Access Layer Switch Rear Panel
The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.
Catalyst 9200L Access Layer Switch Components Delivered in the Shipping Box
The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C9200L-48T-4X-A | Network license | Network Advantage |
| Access ports | 48 x 10/100/1000 Mbps data copper ports (RJ-45, 4-pair Cat 5E UTP) | Uplink ports | 4 x fixed SFP/SFP+ ports, 1G or 10G optics |
| Management port | RJ-45 Ethernet management port (Cat 5) | Console port | RJ-45 or mini-USB (USB-C/USB adapter) |
| Switching capacity | 176 Gbps standalone; 256 Gbps with StackWise-80 stacking | Forwarding rate | 130.95 Mpps standalone; 190 Mpps with stacking |
| MAC address table | 16,000 entries | IPv4 routing entries | 3,000 entries (11,000 IPv4 routes with ARP/learned) |
| IPv6 routing entries | 1,500 entries | Multicast routes | 1,000 entries |
| ACL / QoS scale | 1,500 ACL entries; 1,000 QoS entries | VLAN IDs | 4094 |
| Packet buffer | 6 MB | FNF flows | 16,000 |
| DRAM / Flash | 2 GB DRAM; 4 GB flash | Jumbo frame | 9198 bytes |
| Default power supply | PWR-C5-125WAC (125W AC) | Power supply slots | 2 slots, FRU |
| Power input | 100-240 VAC, 50-60 Hz, IEC 320-C14 inlet | Power output / BTU | 12V @ 10.5A; 426.5 BTU/hr |
| PoE support | None | Fan design | 2 fixed fans (non-field-replaceable) |
| Stacking architecture | StackWise-80, up to 8 members, single virtual switch | Stacking accessory | C9200L-STACK-KIT (two data stack adapters, one cable) |
| Operating temperature | -5C to 45C (up to 1500 m); -5C to 40C (up to 3000 m) | Storage temperature | -40C to 70C |
| Humidity / Altitude | 5%-90% noncondensing; up to 3000 m operating | Acoustic noise | LpA 42 dB typical / 45 dB max; LwA 5.3 B typical / 5.6 B max |
| Physical dimensions | 1.73 x 17.5 x 11.3 in chassis (12.9 in with fan/power extension) | Weight | 9.97 lb (4.53 kg), single power supply |
| Safety certifications | IEC/UL/CSA/EN 60950-1 and 62368-1, AS/NZS 60950.1/62368.1, Class I Equipment | EMC certifications | FCC Part 15, CISPR 32 Class A, EN 55032 Class A, EN 300 386, ICES-003 Class A, CISPR 35, EN 55035 |
| Environmental compliance | RoHS 5 | Warranty | Cisco Enhanced Limited Lifetime Hardware Warranty (E-LLW) |
| MTBF | 503,400 hours | Minimum software release | Cisco IOS XE Fuji 16.9.2 |
Get More Information
Need pricing, stock, or shipping details for the C9200L-48T-4X-A ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email sales@layer23-switch.com for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
-
What is Cisco C9200L-48T-4X-A used for?
-
Does C9200L-48T-4X-A support PoE?
-
How is C9200L-48T-4X-A different from C9200L-48T-4X-E?
-
Can C9200L-48T-4X-A use modular uplink cards?
-
Can C9200L-48T-4X-A be stacked?
-
How is C9200L-48T-4X-A different from C9200-48T-A?
-
When is C9200L-48T-4X-A the right data-only model?
-
When is C9200L-48T-4X-A not the best fit?
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.
Solid product, solid service. Will definitely order again.
We did our homework before ordering. Layer23 checked out on every front.
Solid construction throughout. Inspires confidence in long-term use.
Shipping to Canada was fast. No issues.
Solid service. Unbreakable reliability.