Can C9200-24T-A be stacked?

Yes, C9200-24T-A joins a StackWise-160 stack of up to 8 C9200 switches that run the same license level. The stack needs C9200-STACK-KIT, which is ordered separately, plus STACK-T4-1M or STACK-T4-3M for longer runs.

What does Network Advantage on C9200-24T-A include?

Network Advantage on C9200-24T-A adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set. The order needs a matching Advantage 24-port subscription, such as C9200-DNA-A-24, and a Smart Account.

Does a second power supply add anything on C9200-24T-A?

A second supply adds redundancy only. The secondary unit is PWR-C6-125WAC/2, and C9200-24T-A has no PoE budget that a second supply could expand. The PWR-C6-715WDC= DC supply is limited to PoE models, so it does not apply here. The second supply is normally the same model as the first, per the data sheet.

What power does C9200-24T-A draw with a C9200-NM-4X installed and no PoE load?

With a C9200-NM-4X installed and no PoE load, C9200-24T-A draws up to 44.49W at 100% traffic on 115 VAC. The weighted average is 41.588W, and the no-link figure is 32.20W. With a C9200-NM-4G installed, the 100% traffic reading is 42.27W, per Table 20 of the Catalyst 9200 data sheet.

Which fan module is the spare for C9200-24T-A?

C9200-24T-A uses the FAN-T2= field-replaceable fan module and has dual redundant fans. With one fan failed it can run at -5 to +45 C up to 3000 m for at most 96 consecutive hours. The limit is 360 hours or 15 occurrences per year, per the hardware installation guide.

What output and heat does the PWR-C6-125WAC give C9200-24T-A?

The PWR-C6-125WAC outputs 12V at 10.5A and dissipates 426.5 BTU/hr. It is the only Catalyst 9200 supply with a 12V output, because the PoE supplies output 54V. Input is 100-240 VAC on an IEC 320-C14 inlet, and the AC hold-up time is 20 ms minimum at 100 VAC.

Does C9200-24T-A run BGP with the Network Advantage license?

No. BGP is available only on Catalyst 9200CX switches, so C9200-24T-A does not run it even with Network Advantage. The -A license adds full EIGRP, HSRP, BSR, MSDP and IP SLA to the Network Essentials base. Plan any BGP peering on the upstream router instead.

Does C9200-24T-A support MACsec-256 with Network Advantage?

No. C9200-24T-A supports MACsec-128 only. MACsec-256 requires Network Advantage, but on Catalyst 9200 only the C9200CX models implement it, so the -A license on C9200-24T-A does not add it. Catalyst 9300 and larger platforms support 256-bit MACsec with Network Advantage, so plan 256-bit link encryption there.

Can C9200-24T-A be stacked with a Catalyst 9300 or a Catalyst 2960-X?

No. Mixed stacking with Catalyst 9300 or 2960-X switches is not supported on C9200-24T-A. The 9200 and 9300 stack cables and adapters use different pins, and 2960-X cables are not backward compatible. The stack kit does not ship with the switch and must be ordered separately.

Does C9200-24T-A support more than 512 SVIs or jumbo frames above 9198 bytes?

No. C9200-24T-A is limited to 512 switched virtual interfaces and 128 PVST instances, with 13,000 STP virtual ports for PVST and MST. Jumbo frames are limited to 9198 bytes. These are the C9200 values in Table 8 of the Catalyst 9200 data sheet, so size VLAN and spanning-tree designs inside them.

C9200-24T-A – 24x1G Data Ports – Modular Uplink – Network Advantage

Name: C9200-24T-A - Cisco Catalyst 9200 24-Port Data Switch
Brand: Cisco
SKU: C9200-24T-A
Price: 1301.02 USD
Availability: InStock
Rating: 5 (13 reviews)

Brand: Cisco Category: Catalyst 9200 Switches Model: C9200-24T-A

Rated 5 out of 5 based on 13 customer ratings

5.013 reviews10 Questions12 sold this month

List Price: ~~$4,046.95~~ 68% OFF

$1,301.02

Price Alert

In StockShips in as little as 1 business day Brand New

Related models

Cisco SN CheckSN verification before shipment.Verify authenticity3-Year WarrantyExtended, enterprise-gradeWarranty terms14-Day ReturnsStraightforward RMA processReturn policyExpress Shipping2-6 Business Daysvia UPS, FedEx, DHL and more

Trusted & Secure Payments

Shop Expert-Recommended Accessories for the C9200-24T-A

Explore optics, stacking accessories, modules, and power supplies—all verified by our engineers for use with this model.

SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMF
Original price was: $853.95.Current price is: $52.00.
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4
Original price was: $1,213.85.Current price is: $91.68.
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMF
Original price was: $2,439.88.Current price is: $150.00.
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km Reach
Original price was: $4,873.66.Current price is: $149.00.
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOM
Original price was: $1,260.58.Current price is: $95.80.
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m Reach
Original price was: $570.10.Current price is: $70.00.
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOM
Original price was: $633.46.Current price is: $59.00.
GLC-EX-SMD
1000BASE-EX SFP - 40km SMF - DOM
Original price was: $2,527.49.Current price is: $205.00.
GLC-ZX-SMD
1000BASE-ZX SFP - 70km SMF - EXT DOM
Original price was: $5,061.30.Current price is: $215.70.
C9200-STACK-KIT
StackWise-160 Bandwidth - 2 Adapters and Cable - Catalyst 9200 Stack Kit
Original price was: $1,628.51.Current price is: $445.00.
STACK-T4-50CM
50 cm Data Stack Cable - Catalyst 9200 and 9200L Stack Kit Default - StackWise-160/80
Original price was: $143.20.Current price is: $66.00.
STACK-T4-1M
1 m Data Stack Cable - Catalyst 9200 and 9200L - StackWise-160/80
Original price was: $277.26.Current price is: $146.00.
STACK-T4-3M
3 m Type 3 Stacking Cable - Catalyst 9200 and 9200L - StackWise-160/80
Original price was: $415.89.Current price is: $194.00.
C9200-NM-4G
4x1G SFP Uplinks - Network Module - Catalyst 9200 Modular Switches
Original price was: $657.40.Current price is: $256.00.
C9200-NM-4X
4x10GE SFP+ Ports - Catalyst 9200 Module
Original price was: $2,578.21.Current price is: $658.00.
PWR-C6-125WAC=
125W AC PSU - Catalyst 9200 Data Switches
Original price was: $1,651.67.Current price is: $529.00.

Why Layer23-Switch

Stocked, Shipped and Supported by One Team

Founded

Customers

Units shipped

Countries

Inventory You Can See

Cisco stock on hand

Models ready to ship

Warehouse space

Ships in 1 Business Day

In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.

DHL FedEx UPS Duties included: US · CA · UK

LSCare Warranty

3years on enterprise equipment

Advance replacement for in-stock models
New unit for dead-on-arrival
14-day returns on sealed items

Free CCIE Support

Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.

Part number check Configuration Troubleshooting

Verify Before You Pay

100%factory-sealed

Get label and serial photos before shipment, and check every serial number with Cisco.

C9200-24T-A Description

The C9200-24T-A is a Cisco Catalyst 9200 Series modular-uplink stackable access switch for wiring closets that connect unpowered devices. The switch has 24 1G data ports with no PoE, a modular uplink slot, 128 Gbps of switching capacity and a default PWR-C6-125WAC supply. The -A suffix carries Network Advantage, which adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set.

Quick Specs

Parameter	Specification
Product ID	C9200-24T-A
Product type	Modular-uplink stackable data access switch
Downlink ports	24 x 1G data copper ports
Uplink bay	1 modular network-module slot
Supported uplink modules	C9200-NM-4G, C9200-NM-4X, C9200-NM-BLANK
Network license	Network Advantage
Stacking architecture	StackWise-160
Switching capacity	128 Gbps standalone; 288 Gbps with stacking
Forwarding rate	95.23 Mpps standalone; 214 Mpps with stacking
Default power supply	PWR-C6-125WAC
PoE support	None; data-only ports draw no PoE budget
Minimum Cisco IOS XE release	Gibraltar 16.10.1

Product Performance

Switching Capacity (Standalone)

Switching Capacity With Stacking

Forwarding Rate (Standalone)

Key Features

Routing And Segmentation At The Access Layer

Network Advantage adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set, so department or tenant routing can end at the closet instead of at the distribution layer.

Data Ports On A 125W Supply

The ports carry no PoE, so the default PWR-C6-125WAC supply covers the whole switch. A second PWR-C6-125WAC can be added for power redundancy.

Uplink Module Choice

The single uplink slot takes the C9200-NM-4G for four 1G ports or the C9200-NM-4X for four 1G/10G ports, and a C9200-NM-BLANK keeps airflow intact when no uplink is fitted. Uplink speed is a module choice, so a closet can start on 1G and move to 10G without replacing the switch.

StackWise-160 Stacking

Up to eight C9200 switches of the same license level join one StackWise-160 stack at 160 Gbps. The stack acts as a single switch with up to 384 access ports and sub-50 ms failover.

Field-Replaceable Power And Fans

Both power supplies and the fan modules are field-replaceable, so a failed unit is swapped at the rack without removing the switch from service in the closet.

802.1X And MACsec-128 In The Base Feature Set

Port-based 802.1X authentication and MACsec-128 link encryption are part of the Network Essentials feature set that Network Advantage includes. Access control and link encryption therefore work without configuring the routing protocols.

Application Scenarios

Closet For Printers And Workstations

In an office closet, the switch connects desktops, printers and other devices that carry their own power, and sends their traffic upstream through the uplink module.

Segmented Data Floor

On a floor that must keep tenants or departments apart, the switch runs VRF-lite or VXLAN segmentation at the closet before traffic reaches the campus fabric.

Data Member Of A Powered Stack

In a closet that already holds PoE+ switches, the switch joins their StackWise-160 stack to add data ports under the same management.

Product Comparison

Parameter	C9200-24T-A	C9200-24P-A	C9200-48T-A	C9200L-24T-4X-A
Downlinks total 10/100/1000 or PoE+ copper ports	24 ports data, no PoE	24 ports full PoE+	48 ports data	24 ports data
Uplink configuration	Modular uplink options	Modular uplink options	Modular uplink options	4 x 1G/10G SFP+ fixed
Default power supply	PWR-C6-125WAC	PWR-C6-600WAC	PWR-C6-125WAC	PWR-C5-125WAC
Default available PoE power with single primary power supply	No PoE output	370W	No PoE output	No PoE output
Maximum PoE power with additional secondary power supply	No PoE output	740W	No PoE output	No PoE output
Network license	Network Advantage	Network Advantage	Network Advantage	Network Advantage
Stacking bandwidth support	StackWise-160, 160 Gbps	StackWise-160, 160 Gbps	StackWise-160, 160 Gbps	StackWise-80, 80 Gbps
Switching capacity	128 Gbps	128 Gbps	176 Gbps	128 Gbps
Switch capacity with stacking	288 Gbps	288 Gbps	336 Gbps	208 Gbps

C9200-24T-A is the data-only member of this group: it matches C9200-24P-A on 128 Gbps switching, the modular uplink bay and Network Advantage, but runs on a PWR-C6-125WAC with no PoE output. Any port that must power a phone, camera or access point calls for C9200-24P-A, which adds 370W on one PWR-C6-600WAC and 740W on two. Closets with more than 24 data ports move to C9200-48T-A, at 176 Gbps standalone switching on the same 125W supply. Uplinks fixed at 4 x 1/10G SFP+ are available on C9200L-24T-4X-A, but it stacks on StackWise-80 at 208 Gbps instead of 288 Gbps and cannot take uplink modules. Sites that do not need VRF, VXLAN or EIGRP can order C9200-24T-E, and an Essentials switch can be raised later with a C9200-LIC= term (C9200-24-E-A-3, -5 or -7), which cannot go on the switch order.

Ordering Checklist

Subscription: Select a matching Advantage 24-port term, such as C9200-DNA-A-24 or C9200-DNX-A-24-3Y. The hardware suffix sets the tier, CCW defaults to a 3-year Cisco DNA term that must match it, and a Smart Account is mandatory on every Catalyst 9200 order.
Uplink module: Select one of C9200-NM-4G (4 x 1G), C9200-NM-4X (4 x 1G/10G) or C9200-NM-BLANK; C9200-NM-2Y and C9200-NM-2Q do not apply. The modular bay ships without a chosen uplink speed, so a module or blank must fill it.
Second power supply: A second PWR-C6-125WAC can be added alongside the default supply; DC option PWR-C6-715WDC= does not apply to this data model. The switch ships with one supply, and a second adds power redundancy only, not PoE.
Stack kit: Add C9200-STACK-KIT (two stack adapters and one cable) plus STACK-T4-50CM, STACK-T4-1M or STACK-T4-3M for longer runs. Stacking is an optional line in CCW, and C9200L-STACK-KIT is the kit for fixed-uplink models only.
Power cord: Select a CAB-TA cord for the destination country, such as CAB-TA-NA=, CAB-TA-EU= or CAB-TA-UK=. AC power supplies need a cord selected in CCW.

Optional Add-ons

Add-on	Description
C9200-NM-4G	4 x 1G SFP uplink network module for modular Catalyst 9200 switches
C9200-NM-4X	4 x 1G/10G SFP+ uplink network module
C9200-NM-BLANK	Blank module that preserves airflow when no uplink module is installed
PWR-C6-125WAC	Second 125W AC power supply for redundancy (no PoE budget on this model)
C9200-STACK-KIT	StackWise-160 stack kit with two data stack adapters and one data stack cable (ordered separately)
STACK-T4-1M / STACK-T4-3M	Longer stacking cable options beyond the default 0.5m STACK-T4-50CM
ACC-KIT-T1= / RACK-KIT-T1=	Alternative 19-in or 19/23/24-in and ETSI rack mount kits beyond the standard bracket that ships by default

Catalyst 9200L Access Layer Switch Rear Panel

The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.

1	RJ-45 console port	4	Blue Beacon LED
2	Fixed fan modules on C9200L switches	5	MGMT (RJ-45 10/100/1000 management port)
3	Power supply module slots	6	StackWise-80 port connectors

Catalyst 9200L Access Layer Switch Components Delivered in the Shipping Box

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

1	Cisco Catalyst 9200 Series switch¹ (power supply modules are not displayed)	8	Cable guide
2	AC power cord	9	M4.0 x 20mm Phillips pan-head screw
3	Four rubber mounting feet	10	RJ-45 USB console cable¹
4	Two 19-inch mounting brackets	11	(Optional) USB console cable ¹
5	4 number-12 pan-head screw	12	(Optional) StackWise cable¹ (0.5-meter, 1-meter, or 3-meter)
6	4 number-10 pan-head screws	13	Power cord retainer
7	8 number-8 Phillips flat-head screws	–	–

Specifications

Parameter	Specification	Parameter	Specification
Product ID	C9200-24T-A	Cisco ordering description	Catalyst 9200 24-port Data switch, modular uplinks, Network Advantage
Network license	Network Advantage	Minimum software release	Cisco IOS XE Gibraltar 16.10.1
Downlink ports	24 x 10/100/1000 Mbps data copper ports	Network module slot	1 modular network-module slot
Supported network modules	C9200-NM-4G, C9200-NM-4X, C9200-NM-BLANK	Console port	RJ-45 or mini-USB console
Management port	1 x Ethernet management RJ-45 port	Switching capacity	128 Gbps
Forwarding rate	95.23 Mpps	Switching capacity with stacking	288 Gbps with StackWise-160
Forwarding rate with stacking	214 Mpps with StackWise-160	Stacking	StackWise-160, 160 Gbps, up to 8 members
Stacking kit	C9200-STACK-KIT; STACK-T4-50CM (default), STACK-T4-1M or STACK-T4-3M stack cables	Default power supply	PWR-C6-125WAC 125W AC
Power supply slots	2 slots; second PWR-C6-125WAC optional for redundancy only	AC input voltage	100-240 VAC
AC input frequency	50-60 Hz	Power connector	IEC 320-C14
Heat dissipation	426.5 BTU/hr at 125W output	Fan modules	2 field-replaceable fan modules
Acoustic noise	42 dB LpA typical / 45 dB LpA max (24-port group, AC power, loaded)	Dimensions (H x W x D)	1.73 x 17.5 x 15.4 in. (4.4 x 44.5 x 39.1 cm) with fan FRUs and power supply
Operating temperature	-5°C to 45°C up to 1,500 m; -5°C to 40°C up to 3,000 m	Storage temperature	-40°C to 70°C
Operating humidity	5% to 90% noncondensing	Operating altitude	Up to 3,000 m (10,000 ft)
MTBF	587,800 hours	Safety certifications	IEC/UL/CSA/EN 60950-1 and 62368-1, Class I Equipment
EMC certifications	FCC 47 CFR Part 15, CISPR 32 Class A, EN 55032 Class A, ICES-003 Class A (and related regional standards)	Environmental compliance	RoHS 5

Quality Certifications

Customer Reviews

Write A Review

5.0

Rated 5 out of 5

(13 reviews)

5 Stars

13

4 Stars

0

3 Stars

0

2 Stars

0

1 Stars

0

Linda Williams

Posted on 20/04/2026

Verified Buyer

Rated 5 out of 5

5.0

Got a better deal here than from any of our existing channels.

Philip Clark

Posted on 28/01/2026

Verified Buyer

Rated 5 out of 5

5.0

Clear labeling on the outer box made it easy for our receiving team.

Olivia Jones

Posted on 06/12/2025

Verified Buyer

Rated 5 out of 5

5.0

Pre-sales conversations were efficient — no wasted time, just clear information.

John Wick

Posted on 22/07/2025

Verified Buyer

Rated 5 out of 5

5.0

Professional. Precise. On time.

IT Ops

Posted on 12/03/2025

Verified Buyer

Rated 5 out of 5

5.0

Genuine hardware. Brand new seals. Very happy.

Questions & Answers

Can C9200-24T-A be stacked?
Yes, C9200-24T-A joins a StackWise-160 stack of up to 8 C9200 switches that run the same license level. The stack needs C9200-STACK-KIT, which is ordered separately, plus STACK-T4-1M or STACK-T4-3M for longer runs.
What does Network Advantage on C9200-24T-A include?
Network Advantage on C9200-24T-A adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set. The order needs a matching Advantage 24-port subscription, such as C9200-DNA-A-24, and a Smart Account.
Does a second power supply add anything on C9200-24T-A?
A second supply adds redundancy only. The secondary unit is PWR-C6-125WAC/2, and C9200-24T-A has no PoE budget that a second supply could expand. The PWR-C6-715WDC= DC supply is limited to PoE models, so it does not apply here. The second supply is normally the same model as the first, per the data sheet.
What power does C9200-24T-A draw with a C9200-NM-4X installed and no PoE load?
With a C9200-NM-4X installed and no PoE load, C9200-24T-A draws up to 44.49W at 100% traffic on 115 VAC. The weighted average is 41.588W, and the no-link figure is 32.20W. With a C9200-NM-4G installed, the 100% traffic reading is 42.27W, per Table 20 of the Catalyst 9200 data sheet.
Which fan module is the spare for C9200-24T-A?
C9200-24T-A uses the FAN-T2= field-replaceable fan module and has dual redundant fans. With one fan failed it can run at -5 to +45 C up to 3000 m for at most 96 consecutive hours. The limit is 360 hours or 15 occurrences per year, per the hardware installation guide.
What output and heat does the PWR-C6-125WAC give C9200-24T-A?
The PWR-C6-125WAC outputs 12V at 10.5A and dissipates 426.5 BTU/hr. It is the only Catalyst 9200 supply with a 12V output, because the PoE supplies output 54V. Input is 100-240 VAC on an IEC 320-C14 inlet, and the AC hold-up time is 20 ms minimum at 100 VAC.
Does C9200-24T-A run BGP with the Network Advantage license?
No. BGP is available only on Catalyst 9200CX switches, so C9200-24T-A does not run it even with Network Advantage. The -A license adds full EIGRP, HSRP, BSR, MSDP and IP SLA to the Network Essentials base. Plan any BGP peering on the upstream router instead.
Does C9200-24T-A support MACsec-256 with Network Advantage?
No. C9200-24T-A supports MACsec-128 only. MACsec-256 requires Network Advantage, but on Catalyst 9200 only the C9200CX models implement it, so the -A license on C9200-24T-A does not add it. Catalyst 9300 and larger platforms support 256-bit MACsec with Network Advantage, so plan 256-bit link encryption there.
Can C9200-24T-A be stacked with a Catalyst 9300 or a Catalyst 2960-X?
No. Mixed stacking with Catalyst 9300 or 2960-X switches is not supported on C9200-24T-A. The 9200 and 9300 stack cables and adapters use different pins, and 2960-X cables are not backward compatible. The stack kit does not ship with the switch and must be ordered separately.
Does C9200-24T-A support more than 512 SVIs or jumbo frames above 9198 bytes?
No. C9200-24T-A is limited to 512 switched virtual interfaces and 128 PVST instances, with 13,000 STP virtual ports for PVST and MST. Jumbo frames are limited to 9198 bytes. These are the C9200 values in Table 8 of the Catalyst 9200 data sheet, so size VLAN and spanning-tree designs inside them.

Warranty

100% Low Price Guarantee:

Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.

100% Quality Assurance:

All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.

Free CCIE Technical Support:

Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.

100% Money Back Guarantee:

If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.

Flexible & Secure Payment and Shipping:

We support multiple secure payment and logistics options, backed by industry-leading verification:

Visit How to Pay page for more information

Warranty Coverage & RMA Instructions

Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information

FREE NETWORK TOOLS

Verify, plan, and comparewith confidence

Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Check lifecycle dates

Cisco Switch Selector Tool

Filter Cisco switches by ports, uplinks, PoE, performance, features, license, and budget.

Find matching switches >

Cisco Serial Number Lookup

Verify authenticity and identify exactmodel, coverage, and lifecycle detailsusing a Cisco serial number.

Verify a serial number >

Product Comparison

Compare specifications, capabilitiesand form factors side-by-side tochoose the right hardware.

Cisco Compare products >

DataSheet Downloads

C9200-24T-A Datasheet

Item	Qty	Amount
C9200-24T-ANew, factory-sealed · 3-year warranty · In stock
C9200-DNA-ARequired with each C9200-24T-A

C9200-24T-A – 24x1G Data Ports – Modular Uplink – Network Advantage

Shop Expert-Recommended Accessories for the C9200-24T-A

Stocked, Shipped and Supported by One Team

Inventory You Can See

Ships in 1 Business Day

LSCare Warranty

Free CCIE Support

Verify Before You Pay

C9200-24T-A Description

Quick Specs

Product Performance

Key Features

Application Scenarios

Product Comparison

Ordering Checklist

Optional Add-ons

Catalyst 9200L Access Layer Switch Rear Panel

Catalyst 9200L Access Layer Switch Components Delivered in the Shipping Box

Specifications

Quality Certifications

Customer Reviews

Questions & Answers

Can C9200-24T-A be stacked?

What does Network Advantage on C9200-24T-A include?

Does a second power supply add anything on C9200-24T-A?

What power does C9200-24T-A draw with a C9200-NM-4X installed and no PoE load?

Which fan module is the spare for C9200-24T-A?

What output and heat does the PWR-C6-125WAC give C9200-24T-A?

Does C9200-24T-A run BGP with the Network Advantage license?

Does C9200-24T-A support MACsec-256 with Network Advantage?

Can C9200-24T-A be stacked with a Catalyst 9300 or a Catalyst 2960-X?

Does C9200-24T-A support more than 512 SVIs or jumbo frames above 9198 bytes?

Warranty

Verify, plan, and comparewith confidence

Cisco Switch Selector Tool

Cisco Serial Number Lookup

Product Comparison

DataSheet Downloads

Related Searches of Catalyst 9200 Switches