Can C9200-24P-A be stacked?

Yes, C9200-24P-A joins a StackWise-160 stack of up to 8 C9200 switches that run the same license level. The stack needs C9200-STACK-KIT, which is ordered separately, plus STACK-T4-1M or STACK-T4-3M when the default 50 cm cable is too short.

What does Network Advantage on C9200-24P-A include?

Network Advantage on C9200-24P-A adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set. The order needs a matching Advantage 24-port subscription, such as C9200-DNA-A-24, and a Smart Account.

Can C9200-24P-A join a stack with a fixed-uplink C9200L-24P-4X-A?

No. Cisco does not support C9200 and C9200L switches in one stack, because StackWise-160 and StackWise-80 differ in stacking bandwidth. The data sheet also lists 16,000 MAC addresses and 2 GB DRAM for C9200L. C9200-24P-A can still join a stack with other C9200 variants, such as C9200-24T-A, when the license level matches.

Does C9200-24P-A reserve system power before it allocates PoE from the PWR-C6-600WAC?

Yes. C9200-24P-A reserves 230W of the 600W supply for the switch itself, which leaves the 370W PoE budget. The PoE figure is the supply rating minus that system reservation. With two supplies in combined mode the PoE budget reaches 740W, per the Catalyst 9200 data sheet.

What output and hold-up time does the PWR-C6-600WAC give C9200-24P-A?

The PWR-C6-600WAC outputs 54V at 11.1A, and its AC output hold-up time is 20 ms minimum at 100 VAC. It dissipates 2047.3 BTU/hr on an IEC 320-C16 inlet. A second supply must be an identical PWR-C6-600WAC. Use these values when sizing the UPS and closet cooling.

How do the internal rings of StackWise-160 work on C9200-24P-A?

C9200-24P-A uses 4 internal StackWise-160 rings at 40 Gbps each. A full ring carries 80 Gbps, and spatial reuse (SRP) lifts stack throughput to 160 Gbps, per the Cisco StackWise white paper. The six-ring 240G and 480G figures in some training material belong to the Catalyst 3850 and do not apply to this switch.

Does C9200-24P-A support MACsec-256 with Network Advantage?

No. C9200-24P-A supports MACsec-128 only. MACsec-256 requires Network Advantage, but on Catalyst 9200 only the C9200CX models implement it, so the -A license on C9200-24P-A does not add it. Catalyst 9300 and larger platforms support 256-bit MACsec with Network Advantage, so plan 256-bit link encryption there.

Does the Umbrella DNS connector on C9200-24P-A need the Advantage license?

Yes. The Umbrella native connector forwards DNS requests from the switch to Cisco Umbrella and needs the Cisco DNA Advantage subscription. It is rated at about 200 flows per second and is available on Catalyst 9200 from IOS XE 16.12. C9200-24P-A is the Network Advantage variant, so it carries the entitlement.

Can C9200-24P-A run on a single fan during a fan failure?

Yes, for a limited time. Per the Catalyst 9200 hardware installation guide, C9200-24P-A tolerates -5 to +45 C at up to 3000 m with one failed fan, for at most 96 consecutive hours. The limit is 360 hours or 15 occurrences per year. Replace the failed fan module before those limits are reached.

Does installing a cold-patch SMU on C9200-24P-A interrupt traffic?

Yes. A software maintenance update (SMU) installed as a cold patch on C9200-24P-A needs a reload, which interrupts traffic while the switch restarts. A hot patch applies without a reload. Schedule cold patches inside a maintenance window and keep hot patches for changes that cannot take an outage.

What sound level does C9200-24P-A reach with all PoE+ ports loaded?

C9200-24P-A measures 42 dB typical and 45 dB maximum sound pressure (LpA) with AC power and the PoE+ ports loaded. The values are measured to ISO 7779 and declared to ISO 9296. Consider this when the switch sits in an occupied office floor instead of a ventilated closet.

C9200-24P-A – 24x1G PoE+ Ports – Modular Uplink – 370W PoE Budget – Network Advantage

Name: C9200-24P-A - Cisco Catalyst 9200 24-Port PoE+ Switch
Brand: Cisco
SKU: C9200-24P-A
Price: 2507.50 USD
Availability: InStock
Rating: 4.93 (14 reviews)

Brand: Cisco Category: Catalyst 9200 Switches Model: C9200-24P-A

Rated 4.93 out of 5 based on 14 customer ratings

4.914 reviews11 Questions12 sold this month

List Price: ~~$5,027.18~~ 50% OFF

$2,507.50

Price Alert

In StockShips in as little as 1 business day Brand New

Related models

Cisco SN CheckSN verification before shipment.Verify authenticity3-Year WarrantyExtended, enterprise-gradeWarranty terms14-Day ReturnsStraightforward RMA processReturn policyExpress Shipping2-6 Business Daysvia UPS, FedEx, DHL and more

Trusted & Secure Payments

Shop Expert-Recommended Accessories for the C9200-24P-A

Explore optics, stacking accessories, modules, and power supplies—all verified by our engineers for use with this model.

SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMF
Original price was: $853.95.Current price is: $52.00.
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4
Original price was: $1,213.85.Current price is: $91.68.
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMF
Original price was: $2,439.88.Current price is: $150.00.
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km Reach
Original price was: $4,873.66.Current price is: $149.00.
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOM
Original price was: $1,260.58.Current price is: $95.80.
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m Reach
Original price was: $570.10.Current price is: $70.00.
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOM
Original price was: $633.46.Current price is: $59.00.
GLC-EX-SMD
1000BASE-EX SFP - 40km SMF - DOM
Original price was: $2,527.49.Current price is: $205.00.
GLC-ZX-SMD
1000BASE-ZX SFP - 70km SMF - EXT DOM
Original price was: $5,061.30.Current price is: $215.70.
C9200-STACK-KIT
StackWise-160 Bandwidth - 2 Adapters and Cable - Catalyst 9200 Stack Kit
Original price was: $1,628.51.Current price is: $445.00.
STACK-T4-50CM
50 cm Data Stack Cable - Catalyst 9200 and 9200L Stack Kit Default - StackWise-160/80
Original price was: $143.20.Current price is: $66.00.
STACK-T4-1M
1 m Data Stack Cable - Catalyst 9200 and 9200L - StackWise-160/80
Original price was: $277.26.Current price is: $146.00.
STACK-T4-3M
3 m Type 3 Stacking Cable - Catalyst 9200 and 9200L - StackWise-160/80
Original price was: $415.89.Current price is: $194.00.
C9200-NM-4G
4x1G SFP Uplinks - Network Module - Catalyst 9200 Modular Switches
Original price was: $657.40.Current price is: $256.00.
C9200-NM-4X
4x10GE SFP+ Ports - Catalyst 9200 Module
Original price was: $2,578.21.Current price is: $658.00.
PWR-C6-600WAC
600W AC PSU - Catalyst 9200 PoE Models
Original price was: $1,693.00.Current price is: $587.00.

Why Layer23-Switch

Stocked, Shipped and Supported by One Team

Founded

Customers

Units shipped

Countries

Inventory You Can See

Cisco stock on hand

Models ready to ship

Warehouse space

Ships in 1 Business Day

In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.

DHL FedEx UPS Duties included: US · CA · UK

LSCare Warranty

3years on enterprise equipment

Advance replacement for in-stock models
New unit for dead-on-arrival
14-day returns on sealed items

Free CCIE Support

Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.

Part number check Configuration Troubleshooting

Verify Before You Pay

100%factory-sealed

Get label and serial photos before shipment, and check every serial number with Cisco.

C9200-24P-A Description

The C9200-24P-A is a Cisco Catalyst 9200 Series modular-uplink stackable access switch for wiring closets that power phones and access points. The switch has 24 1G PoE+ ports, a modular uplink slot, a 370W PoE budget on the default PWR-C6-600WAC and 128 Gbps of switching capacity that rises to 288 Gbps in a StackWise-160 stack. The -A suffix carries Network Advantage, which adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set.

Quick Specs

Parameter	Specification
Product ID	C9200-24P-A
Product type	Modular-uplink stackable PoE+ access switch
Downlink ports	24 x 1G PoE+ copper ports
Uplink bay	1 modular network-module slot
Supported uplink modules	C9200-NM-4G, C9200-NM-4X, C9200-NM-BLANK
Network license	Network Advantage
Stacking architecture	StackWise-160
Switching capacity	128 Gbps standalone; 288 Gbps with stacking
Forwarding rate	95.23 Mpps standalone; 214 Mpps with stacking
Default power supply	PWR-C6-600WAC
Default PoE budget	370W with one PWR-C6-600WAC
Expanded PoE budget	740W with a second PWR-C6-600WAC
Minimum Cisco IOS XE release	Gibraltar 16.10.1

Product Performance

Switching Capacity (Standalone)

Switching Capacity With Stacking

Forwarding Rate (Standalone)

Key Features

Routing And Segmentation At The Access Layer

Network Advantage adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set, so department or tenant routing can end at the closet instead of at the distribution layer.

PoE Budget And The Second Supply

The default 600W supply leaves 370W for PoE, about 15W per port across 24 ports. A second PWR-C6-600WAC raises the budget to 740W, above the 720W that 24 PoE+ ports can draw, so every port can run at 30W.

Uplink Module Choice

The single uplink slot takes the C9200-NM-4G for four 1G ports or the C9200-NM-4X for four 1G/10G ports, and a C9200-NM-BLANK keeps airflow intact when no uplink is fitted. Uplink speed is a module choice, so a closet can start on 1G and move to 10G without replacing the switch.

StackWise-160 Stacking

Up to eight C9200 switches of the same license level join one StackWise-160 stack at 160 Gbps. The stack acts as a single switch with up to 384 access ports and sub-50 ms failover.

Field-Replaceable Power And Fans

Both power supplies and the fan modules are field-replaceable, so a failed unit is swapped at the rack without removing the switch from service in the closet.

DC Supply Option

The PWR-C6-715WDC= supply gives 485W of PoE alone and 740W as a pair, and it can sit beside an AC supply as primary and backup. It is a spare-part supply that needs Cisco IOS XE 17.8.1 or later.

Application Scenarios

Floor Wiring Closet For Phones And Wi-Fi

In a floor wiring closet, the switch powers IP phones and wireless access points from its 24 PoE+ ports and carries their traffic to the distribution layer over the uplink module.

Tenant-Separated Office Floor

On an office floor shared by several tenants or departments, the switch keeps each group in its own VRF and starts that separation at the access layer.

Branch Office Access Stack

A branch office that outgrows one switch can add C9200 members to a StackWise-160 stack and manage the group as a single switch.

Product Comparison

Parameter	C9200-24P-A	C9200-48P-A	C9200-24T-A	C9200L-24P-4X-A
Downlinks total 10/100/1000 or PoE+ copper ports	24 ports full PoE+	48 ports full PoE+	24 ports data	24 ports full PoE+
Uplink configuration	Modular uplink options	Modular uplink options	Modular uplink options	4 x 1G/10G SFP+ fixed
Default power supply	PWR-C6-600WAC	PWR-C6-1KWAC	PWR-C6-125WAC	PWR-C5-600WAC
Default available PoE power with single primary power supply	370W	740W	No PoE	370W
Maximum PoE power with additional secondary power supply	740W	1440W	No PoE	740W
Network license	Network Advantage	Network Advantage	Network Advantage	Network Advantage
Stacking bandwidth support	StackWise-160, 160 Gbps	StackWise-160, 160 Gbps	StackWise-160, 160 Gbps	StackWise-80, 80 Gbps
Switching capacity	128 Gbps	176 Gbps	128 Gbps	128 Gbps
Switch capacity with stacking	288 Gbps	336 Gbps	288 Gbps	208 Gbps

C9200-24P-A is the 24-port PoE+ Network Advantage model of this group: its ports share 370W on the default PWR-C6-600WAC and 740W with a second supply, while C9200-24T-A has the same 128 Gbps chassis and modular uplink bay on a PWR-C6-125WAC with no PoE, which suits closets that power no devices. Closets with more than 24 powered drops need C9200-48P-A, with 740W on one PWR-C6-1KWAC and 1440W on two. Uplinks fixed at 4 x 1/10G SFP+ are available on C9200L-24P-4X-A at the same 370W, but it stacks on StackWise-80 at 208 Gbps instead of 288 Gbps and cannot take uplink modules. Sites that do not need VRF, VXLAN or EIGRP can order C9200-24P-E instead, and an Essentials switch can be raised later with a C9200-LIC= term (C9200-24-E-A-3, -5 or -7), which cannot go on the switch order.

PoE Power Planning

Planning Item	Value or Check
Default power supply	PWR-C6-600WAC (600W AC)
Default PoE budget	370W across 24 PoE+ ports with one PWR-C6-600WAC installed
Expanded PoE budget	740W with a second PWR-C6-600WAC, matching 24 ports x 30W PoE+
PoE standard	802.3at PoE+ up to 30W per port, with Perpetual PoE and Fast PoE
DC power alternative	PWR-C6-715WDC= (spare-only, IOS XE 17.8.1 or later): 485W PoE with one supply, 740W with two
Device count check	Confirm total endpoint draw against the 370W single-supply budget before relying on one power supply

Ordering Checklist

Subscription: Select a matching Advantage 24-port term, such as C9200-DNA-A-24 or C9200-DNX-A-24-3Y. The hardware suffix sets the tier, CCW defaults to a 3-year Cisco DNA term that must match it, and a Smart Account is mandatory on every Catalyst 9200 order.
Uplink module: Select one of C9200-NM-4G (4 x 1G), C9200-NM-4X (4 x 1G/10G) or C9200-NM-BLANK; C9200-NM-2Y and C9200-NM-2Q do not apply. The modular bay ships without a chosen uplink speed, so a module or blank must fill it.
Second power supply: A second PWR-C6-600WAC is optional; PWR-C6-715WDC= is spare-only. One supply gives 370W of PoE; two give 740W.
Stack kit: Add C9200-STACK-KIT (two stack adapters and one cable) plus STACK-T4-50CM, STACK-T4-1M or STACK-T4-3M for longer runs. Stacking is an optional line in CCW, and C9200L-STACK-KIT is the kit for fixed-uplink models only.
Power cord: Select a CAB-TA cord for the destination country, such as CAB-TA-NA=, CAB-TA-EU= or CAB-TA-UK=. AC power supplies need a cord selected in CCW.

Optional Add-ons

Add-on	Description
C9200-NM-4G	4 x 1G SFP uplink network module for modular Catalyst 9200 switches
C9200-NM-4X	4 x 1G/10G SFP+ uplink network module
C9200-NM-BLANK	Blank module that preserves airflow when no uplink module is installed
PWR-C6-600WAC	Second 600W AC power supply raising the PoE budget from 370W to 740W
PWR-C6-715WDC=	Spare-only 715W DC power supply (IOS XE 17.8.1 or later), usable alongside an AC supply
C9200-STACK-KIT	StackWise-160 stack kit with two data stack adapters and one data stack cable (ordered separately)
STACK-T4-1M / STACK-T4-3M	Longer stacking cable options beyond the default 0.5m STACK-T4-50CM

Catalyst 9200L Access Layer Switch Rear Panel

The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.

1	RJ-45 console port	4	Blue Beacon LED
2	Fixed fan modules on C9200L switches	5	MGMT (RJ-45 10/100/1000 management port)
3	Power supply module slots	6	StackWise-80 port connectors

Catalyst 9200 Access Layer Switch Components Delivered in the Shipping Box

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

1	Cisco Catalyst 9200 Series switch¹ (power supply modules are not displayed)	8	Cable guide
2	AC power cord	9	M4.0 x 20mm Phillips pan-head screw
3	Four rubber mounting feet	10	RJ-45 USB console cable¹
4	Two 19-inch mounting brackets	11	(Optional) USB console cable ¹
5	4 number-12 pan-head screw	12	(Optional) StackWise cable¹ (0.5-meter, 1-meter, or 3-meter)
6	4 number-10 pan-head screws	13	Power cord retainer
7	8 number-8 Phillips flat-head screws	–	–

Specifications

Parameter	Specification	Parameter	Specification
Product ID	C9200-24P-A	Network license	Network Advantage
Minimum software release	Cisco IOS XE Gibraltar 16.10.1	Downlink ports	24 x 10/100/1000 Mbps PoE+ copper ports
Network module slot	1 modular network-module slot	Supported network modules	C9200-NM-4G, C9200-NM-4X, C9200-NM-BLANK
Console port	RJ-45 or mini-USB console	Management port	1 x Ethernet management RJ-45 port
Switching capacity	128 Gbps	Forwarding rate	95.23 Mpps
Switching capacity with stacking	288 Gbps with StackWise-160	Forwarding rate with stacking	214 Mpps with StackWise-160
Packet buffer	6 MB	DRAM	4 GB
Flash	4 GB	MAC addresses	32,000 entries
VLAN IDs	4,094	Switched virtual interfaces	512
IPv4 routes	4,000 entries (14,000 IPv4 routes with ARP + learned)	IPv6 routes	2,000 entries
Multicast routes	1,000 entries	ACL entries	1,600 entries
QoS entries	1,000 entries	Flexible NetFlow entries	16,000 flows
Virtual networks	4	Jumbo frames	9,198 bytes
Stacking	StackWise-160, 160 Gbps, up to 8 members	Stacking kit	C9200-STACK-KIT; STACK-T4-50CM (default), STACK-T4-1M or STACK-T4-3M stack cables
Default power supply	PWR-C6-600WAC 600W AC	Power supply slots	2 slots (second supply optional)
Power supply options	PWR-C6-715WDC= DC (spare only, IOS XE 17.8.1 or later)	AC input voltage	100-240 VAC
AC input frequency	50-60 Hz	Power connector	IEC 320-C16
Heat dissipation	2,047.3 BTU/hr at 600W output	Default PoE budget	370W
PoE budget with other supplies	740W with a second PWR-C6-600WAC; 485W with one PWR-C6-715WDC=, 740W with two	PoE standards	802.3at PoE+ up to 30W per port
Fan modules	2 field-replaceable fan modules	Acoustic noise	42 dB LpA typical / 45 dB LpA max (24-port PoE+ group, AC power, loaded)
Dimensions (H x W x D)	1.73 x 17.5 x 15.4 in. (4.4 x 44.5 x 39.1 cm) with fan FRUs and power supplies	Operating temperature	-5°C to 45°C up to 1,500 m; -5°C to 40°C up to 3,000 m
Storage temperature	-40°C to 70°C	Operating humidity	5% to 90% noncondensing
Operating altitude	Up to 3,000 m (10,000 ft)	MTBF	422,310 hours
Safety certifications	IEC/UL/CSA/EN 60950-1 and 62368-1, Class I Equipment	EMC certifications	FCC 47 CFR Part 15, CISPR 32 Class A, EN 55032 Class A, ICES-003 Class A (and related regional standards)
Environmental compliance	RoHS 5

Quality Certifications

Customer Reviews

Write A Review

4.9

Rated 4.93 out of 5

(14 reviews)

5 Stars

4 Stars

3 Stars

2 Stars

1 Stars

Carol Hicks

Posted on 25/03/2026

Verified Buyer

Rated 5 out of 5

5.0

Production environment accepted the new hardware on the first try.

Sarah Hicks

Posted on 09/03/2026

Verified Buyer

Rated 4 out of 5

4.0

Each interaction with Layer23 has reinforced our confidence in them. Invoice formatting was a bit different from what our AP system expects, but workable.

Daniel Kumar

Posted on 09/02/2026

Verified Buyer

Rated 5 out of 5

5.0

Their warehouse seems organized — orders ship without delays or errors.

Bowery King

Posted on 10/08/2025

Verified Buyer

Rated 5 out of 5

5.0

You delivered the goods. I respect that.

Charon

Posted on 18/05/2025

Verified Buyer

Rated 5 out of 5

5.0

We expect the best, and you provided it. Thank you.

Questions & Answers

Can C9200-24P-A be stacked?
Yes, C9200-24P-A joins a StackWise-160 stack of up to 8 C9200 switches that run the same license level. The stack needs C9200-STACK-KIT, which is ordered separately, plus STACK-T4-1M or STACK-T4-3M when the default 50 cm cable is too short.
What does Network Advantage on C9200-24P-A include?
Network Advantage on C9200-24P-A adds EIGRP, IS-IS, VRF, VXLAN and LISP to the Network Essentials feature set. The order needs a matching Advantage 24-port subscription, such as C9200-DNA-A-24, and a Smart Account.
Can C9200-24P-A join a stack with a fixed-uplink C9200L-24P-4X-A?
No. Cisco does not support C9200 and C9200L switches in one stack, because StackWise-160 and StackWise-80 differ in stacking bandwidth. The data sheet also lists 16,000 MAC addresses and 2 GB DRAM for C9200L. C9200-24P-A can still join a stack with other C9200 variants, such as C9200-24T-A, when the license level matches.
Does C9200-24P-A reserve system power before it allocates PoE from the PWR-C6-600WAC?
Yes. C9200-24P-A reserves 230W of the 600W supply for the switch itself, which leaves the 370W PoE budget. The PoE figure is the supply rating minus that system reservation. With two supplies in combined mode the PoE budget reaches 740W, per the Catalyst 9200 data sheet.
What output and hold-up time does the PWR-C6-600WAC give C9200-24P-A?
The PWR-C6-600WAC outputs 54V at 11.1A, and its AC output hold-up time is 20 ms minimum at 100 VAC. It dissipates 2047.3 BTU/hr on an IEC 320-C16 inlet. A second supply must be an identical PWR-C6-600WAC. Use these values when sizing the UPS and closet cooling.
How do the internal rings of StackWise-160 work on C9200-24P-A?
C9200-24P-A uses 4 internal StackWise-160 rings at 40 Gbps each. A full ring carries 80 Gbps, and spatial reuse (SRP) lifts stack throughput to 160 Gbps, per the Cisco StackWise white paper. The six-ring 240G and 480G figures in some training material belong to the Catalyst 3850 and do not apply to this switch.
Does C9200-24P-A support MACsec-256 with Network Advantage?
No. C9200-24P-A supports MACsec-128 only. MACsec-256 requires Network Advantage, but on Catalyst 9200 only the C9200CX models implement it, so the -A license on C9200-24P-A does not add it. Catalyst 9300 and larger platforms support 256-bit MACsec with Network Advantage, so plan 256-bit link encryption there.
Does the Umbrella DNS connector on C9200-24P-A need the Advantage license?
Yes. The Umbrella native connector forwards DNS requests from the switch to Cisco Umbrella and needs the Cisco DNA Advantage subscription. It is rated at about 200 flows per second and is available on Catalyst 9200 from IOS XE 16.12. C9200-24P-A is the Network Advantage variant, so it carries the entitlement.
Can C9200-24P-A run on a single fan during a fan failure?
Yes, for a limited time. Per the Catalyst 9200 hardware installation guide, C9200-24P-A tolerates -5 to +45 C at up to 3000 m with one failed fan, for at most 96 consecutive hours. The limit is 360 hours or 15 occurrences per year. Replace the failed fan module before those limits are reached.
Does installing a cold-patch SMU on C9200-24P-A interrupt traffic?
Yes. A software maintenance update (SMU) installed as a cold patch on C9200-24P-A needs a reload, which interrupts traffic while the switch restarts. A hot patch applies without a reload. Schedule cold patches inside a maintenance window and keep hot patches for changes that cannot take an outage.
What sound level does C9200-24P-A reach with all PoE+ ports loaded?
C9200-24P-A measures 42 dB typical and 45 dB maximum sound pressure (LpA) with AC power and the PoE+ ports loaded. The values are measured to ISO 7779 and declared to ISO 9296. Consider this when the switch sits in an occupied office floor instead of a ventilated closet.

Warranty

100% Low Price Guarantee:

Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.

100% Quality Assurance:

All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.

Free CCIE Technical Support:

Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.

100% Money Back Guarantee:

If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.

Flexible & Secure Payment and Shipping:

We support multiple secure payment and logistics options, backed by industry-leading verification:

Visit How to Pay page for more information

Warranty Coverage & RMA Instructions

Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information

FREE NETWORK TOOLS

Verify, plan, and comparewith confidence

Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Check lifecycle dates

Cisco Switch Selector Tool

Filter Cisco switches by ports, uplinks, PoE, performance, features, license, and budget.

Find matching switches >

Cisco Serial Number Lookup

Verify authenticity and identify exactmodel, coverage, and lifecycle detailsusing a Cisco serial number.

Verify a serial number >

Product Comparison

Compare specifications, capabilitiesand form factors side-by-side tochoose the right hardware.

Cisco Compare products >

DataSheet Downloads

C9200-24P-A Datasheet

Item	Qty	Amount
C9200-24P-ANew, factory-sealed · 3-year warranty · In stock
C9200-DNA-ARequired with each C9200-24P-A

C9200-24P-A – 24x1G PoE+ Ports – Modular Uplink – 370W PoE Budget – Network Advantage

Shop Expert-Recommended Accessories for the C9200-24P-A

Stocked, Shipped and Supported by One Team

Inventory You Can See

Ships in 1 Business Day

LSCare Warranty

Free CCIE Support

Verify Before You Pay

C9200-24P-A Description

Quick Specs

Product Performance

Key Features

Application Scenarios

Product Comparison

PoE Power Planning

Ordering Checklist

Optional Add-ons

Catalyst 9200L Access Layer Switch Rear Panel

Catalyst 9200 Access Layer Switch Components Delivered in the Shipping Box

Specifications

Quality Certifications

Customer Reviews

Questions & Answers

Can C9200-24P-A be stacked?

What does Network Advantage on C9200-24P-A include?

Can C9200-24P-A join a stack with a fixed-uplink C9200L-24P-4X-A?

Does C9200-24P-A reserve system power before it allocates PoE from the PWR-C6-600WAC?

What output and hold-up time does the PWR-C6-600WAC give C9200-24P-A?

How do the internal rings of StackWise-160 work on C9200-24P-A?

Does C9200-24P-A support MACsec-256 with Network Advantage?

Does the Umbrella DNS connector on C9200-24P-A need the Advantage license?

Can C9200-24P-A run on a single fan during a fan failure?

Does installing a cold-patch SMU on C9200-24P-A interrupt traffic?

What sound level does C9200-24P-A reach with all PoE+ ports loaded?

Warranty

Verify, plan, and comparewith confidence

Cisco Switch Selector Tool

Cisco Serial Number Lookup

Product Comparison

DataSheet Downloads

Related Searches of Catalyst 9200 Switches