C9200L-24P-4X-A – 24x1G PoE+ Ports – 4x10G SFP+ Uplinks – 370W PoE Budget
Cisco C9200L-24P-4X-A Compatible Accessories, Modules & Spare Parts
Find compatible network modules, power supplies, fans, optics, cables and spare parts for the Cisco C9200L-24P-4X-A. These accessories support fiber connectivity, hardware replacement, spare inventory and network maintenance projects.-
SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMFOriginal price was: $1,870.01.$52.00Current price is: $52.00. Condition: New Factory Sealed -
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4Original price was: $2,658.11.$71.68Current price is: $71.68. Condition: New Factory Sealed -
SFP-10G-SR-X
10GBASE-SR SFP+ - Extended Temp - 400m OM4 MMFOriginal price was: $3,785.89.$1,020.00Current price is: $1,020.00. Condition: New Factory Sealed -
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMFOriginal price was: $5,342.92.$150.00Current price is: $150.00. Condition: New Factory Sealed -
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km ReachOriginal price was: $10,672.47.$170.00Current price is: $170.00. Condition: New Factory Sealed -
SFP-10G-LR-X
10GBASE-LR SFP+ - Extended Temp - 10km SMFOriginal price was: $11,206.77.$306.00Current price is: $306.00. Condition: New Factory Sealed -
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOMOriginal price was: $2,658.11.$95.80Current price is: $95.80. Condition: New Factory Sealed -
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m ReachOriginal price was: $1,202.16.$70.00Current price is: $70.00. Condition: New Factory Sealed -
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOMOriginal price was: $1,335.73.$57.00Current price is: $57.00. Condition: New Factory Sealed -
GLC-EX-SMD
1000BASE-EX SFP - 40km SMF - DOMOriginal price was: $5,329.57.$205.00Current price is: $205.00. Condition: New Factory Sealed
Established Global IT Distributor
With over a decade of industry experience, we are a certified Cisco Partner delivering genuine enterprise networking hardware and trusted services to system integrators, ISPs, and enterprises worldwide.
C9200L-24P-4X-A Description
The C9200L-24P-4X-A is a Cisco Catalyst 9200L fixed-uplink access switch built around 24 PoE+ copper ports and four fixed 1/10G SFP+ uplink ports, positioned for branch-office and entry-level enterprise wiring closets that need full PoE+ output without a modular uplink module to configure. It ships with the Network Advantage license tier, adding EIGRP, HSRP, IS-IS, and network segmentation features such as VRF-lite, VXLAN, and LISP on top of the Layer 2 and Routed Access base that Network Essentials already covers. Power comes from a default PWR-C5-600WAC supply delivering a 370W PoE budget, with a second supply raising that to 740W across the 24 ports. The switch stacks through StackWise-80 at up to eight members, and the fixed 4x10G uplinks let a closet standardize on SFP+ optics instead of waiting on a network-module order. As an Advantage-tier PoE+ access switch with 10G-capable uplinks, it fits campus or branch designs where the access layer itself needs routed segmentation and multicast features rather than pure Layer 2 forwarding to a distribution switch.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C9200L-24P-4X-A |
|
Product type |
Fixed-uplink stackable PoE+ access switch |
|
Access ports |
24 x 1G PoE+ copper ports |
|
Uplink ports |
4 x 1/10G SFP+ fixed uplink ports |
|
Network license |
Network Advantage |
|
Stacking architecture |
StackWise-80 |
|
Stack bandwidth |
80 Gbps |
|
Switching capacity |
128 Gbps standalone; 208 Gbps with stacking |
|
Forwarding rate |
95.23 Mpps standalone; 155 Mpps with stacking |
|
Default PoE budget |
370W with one PWR-C5-600WAC |
|
Expanded PoE budget |
740W with a second PWR-C5-600WAC |
|
Default power supply |
PWR-C5-600WAC |
|
Minimum Cisco IOS XE release |
16.9.2 or later |
Product Performance
Key Features
All 24 copper ports support 802.3at PoE+, and the default PWR-C5-600WAC supply covers a 370W budget without requiring a second power supply purchase for typical phone-and-AP closets.
The four fixed 1/10G SFP+ ports remove the network-module selection step that modular C9200 switches require, so the uplink bill of materials is limited to picking SFP or SFP+ optics rather than a module PID.
Up to eight C9200L-24P-4X-A units join the same StackWise-80 ring at 80 Gbps, letting a wiring closet grow port count without adding standalone management points, as long as every member stays within the C9200L stacking family.
The Advantage license adds EIGRP, HSRP, IS-IS, and segmentation features (VRF-lite, VXLAN, LISP) that Network Essentials does not include, which matters when the access switch itself needs to participate in routing or multi-tenant segmentation instead of only forwarding to a routed distribution layer.
Adding a second PWR-C5-600WAC raises the PoE budget from 370W to 740W, which matters for closets approaching full 24-port PoE+ device density rather than a light phone-only deployment.
NETCONF/RESTCONF/YANG programmability and model-driven telemetry are part of the Network Stack license baseline on this hardware, so automation scripts and telemetry collectors can be pointed at the switch without a separate feature license or a subscription-tier change.
Application Scenarios
Deployed as the access layer in a branch or campus wiring closet where the switch itself needs Network Advantage routing features such as EIGRP or HSRP, not just Layer 2 forwarding to an upstream router.
Used where VRF-lite or VXLAN segmentation is applied directly at the access layer to separate tenant or department traffic before it reaches the distribution switch.
Installed to power IP phones, PoE+ access points, and PoE-powered cameras across 24 ports from a single default supply, with headroom to add a second supply as endpoint density grows.
Product Comparison
|
Parameter |
C9200L-24P-4X-A | |||
|---|---|---|---|---|
|
Access ports |
24 x 1G PoE+ copper ports |
24 x 1G PoE+ copper ports |
48 x 1G PoE+ copper ports |
24 x 1G PoE+ copper ports |
|
Uplink ports |
4 x 1/10G SFP+ fixed uplink ports |
4 x 1/10G SFP+ fixed uplink ports |
4 x 1/10G SFP+ fixed uplink ports |
4 x 1G SFP fixed uplink ports |
|
Network license |
Network Advantage |
Network Essentials |
Network Advantage |
Network Advantage |
|
Default power supply |
PWR-C5-600WAC |
PWR-C5-600WAC |
PWR-C5-1KWAC |
PWR-C5-600WAC |
|
Default PoE budget |
370W with one supply |
370W with one supply |
740W with one supply |
370W with one supply |
|
Expanded PoE budget |
740W with a second supply |
740W with a second supply |
1440W with a second supply |
740W with a second supply |
|
Switching capacity |
128 Gbps standalone; 208 Gbps with stacking |
128 Gbps standalone; 208 Gbps with stacking |
176 Gbps standalone; 256 Gbps with stacking |
56 Gbps standalone; 136 Gbps with stacking |
|
Stacking architecture |
StackWise-80 |
StackWise-80 |
StackWise-80 |
StackWise-80 |
|
Minimum Cisco IOS XE release |
16.9.2 or later |
16.9.2 or later |
16.9.2 or later |
16.9.2 or later |
- The license split between C9200L-24P-4X-A and C9200L-24P-4X-E sits on identical 24-port PoE+ hardware with the same 370W/740W PoE budget and the same 4x10G uplinks, so a design that never needs EIGRP, HSRP, IS-IS, or VRF-lite/VXLAN segmentation at the access layer can drop to the Network Essentials C9200L-24P-4X-E and skip the Advantage subscription cost.
- Moving up to C9200L-48P-4X-A instead of staying on the 24-port model doubles the access-port count and default PoE budget (740W vs 370W) at the cost of a larger PWR-C5-1KWAC supply, which only pays off when the closet needs more than 24 PoE+ drops on one stack member.
- Choosing C9200L-24P-4G-A over C9200L-24P-4X-A keeps the same 24-port PoE+ chassis and license tier but drops the uplink ceiling to 1G SFP, cutting standalone switching capacity from 128 Gbps to 56 Gbps; that trade only makes sense when the upstream distribution link is confirmed to stay at 1G.
- Cisco’s ordering guide does not publish an in-place upgrade PID that converts a Network Essentials C9200L-24P-4X-E to Advantage on the same hardware, so for deciding which SKU to order, settle the routing/segmentation requirement first and the port-count and uplink-speed questions second, since those two dimensions do not separate this group from the 4G uplink alternative.
Selection Guide
1. When Network Essentials Covers The Same Hardware
C9200L-24P-4X-A ships with Network Advantage; the identical 24-port PoE+, 4x10G-uplink hardware is also sold as C9200L-24P-4X-E at Network Essentials, so an access role that only needs Layer 2 forwarding, static routing, or Routed Access up to 1000 OSPF routes can take the Essentials-tier order instead of paying for Advantage features it will not use.
2. No In-Place License Upgrade Path Exists
Cisco’s ordering guide does not list a same-hardware upgrade PID from Network Essentials to Network Advantage for this platform; a project that starts on C9200L-24P-4X-E and later needs EIGRP, HSRP, IS-IS, or VRF-lite/VXLAN segmentation has to place a new C9200L-24P-4X-A hardware order rather than license-upgrade the installed unit.
3. Second Power Supply Threshold For Full PoE+ Load
The default PWR-C5-600WAC supply covers a 370W PoE budget; a closet that plans to power PoE+ devices across most or all of the 24 ports at once should size a second PWR-C5-600WAC into the order to reach the 740W expanded budget rather than risk running short at full port density.
4. Uplink Media Boundary Against The 4G Variant
C9200L-24P-4X-A fixes its uplinks at 1/10G SFP+; if the design is confirmed to stay on 1G uplinks permanently, the 1G-only C9200L-24P-4G-A carries the same 24-port PoE+ access layer and license tier at a lower standalone switching capacity, so the uplink speed requirement is the deciding factor between the two, not the port count or license.
PoE Power Planning
|
Planning Item |
Value or Check |
|---|---|
|
Default power supply |
PWR-C5-600WAC |
|
Default PoE budget |
370W across 24 PoE+ ports with one PWR-C5-600WAC installed |
|
Expanded PoE budget |
740W with a second PWR-C5-600WAC installed |
|
PoE standard |
802.3at PoE+ (up to 30W per port) |
|
DC power alternative |
PWR-C5-715WDC= (spare-only, requires IOS XE 17.8.1 or later) delivers 485W PoE with one supply and 740W with two |
|
Device count check |
Confirm total connected PoE+ device draw against the 370W default budget before relying on a single power supply |
Ordering Checklist
|
Check Item |
What to Confirm |
Why It Matters |
|---|---|---|
|
Exact license suffix |
C9200L-24P-4X-A carries Network Advantage; C9200L-24P-4X-E carries Network Essentials on identical hardware |
Ordering the wrong suffix locks in the wrong license tier on hardware that cannot be license-upgraded in place |
|
Matching subscription tier |
Cisco Catalyst or Cisco DNA term subscription (3, 5, or 7 years) must match the Advantage hardware tier |
A mismatched subscription tier can stall activation under the mandatory Smart Account |
|
Second power supply for full PoE load |
Confirm whether a second PWR-C5-600WAC is needed to reach the 740W expanded PoE budget |
Under-provisioning power leaves no headroom once PoE+ device count approaches full port density |
|
Stack kit inclusion |
C9200L-STACK-KIT is not included by default and must be ordered separately |
Omitting the stack kit blocks StackWise-80 stacking at installation |
|
Uplink optics |
Confirm 1G SFP or 10G SFP+ optics against the target platform’s supported list before order release |
The fixed 4x10G uplink ports accept either media, but the wrong optic class can be rejected by the host port |
Optional Add-ons
|
Add-on |
Description |
|---|---|
|
Second AC power supply to raise the PoE budget from 370W to 740W | |
|
Spare-only DC power supply option requiring IOS XE 17.8.1 or later | |
|
StackWise-80 stacking kit with two data stack adapters and one data stack cable (not included by default) | |
|
Longer StackWise-80 stacking cable options beyond the default 0.5m cable |
Catalyst 9200L Access Layer Switch Rear Panel
The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.
Catalyst 9200L Access Layer Switch Components Delivered in the Shipping Box
The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C9200L-24P-4X-A | Network license | Network Advantage |
| Access ports | 24 x 10/100/1000 Mbps PoE+ copper ports | Uplink ports | 4 x 1/10G SFP+ fixed uplink ports (1G SFP or 10G SFP+) |
| Management port | 1 x Ethernet management RJ-45 port | Console port | RJ-45 or mini-USB console |
| Switching capacity | 128 Gbps standalone; 208 Gbps with StackWise-80 | Forwarding rate | 95.23 Mpps standalone; 155 Mpps with StackWise-80 |
| MAC address table | 16,000 entries | IPv4 routing entries | 3,000 entries (11,000 IPv4 routes with ARP + learned) |
| IPv6 routing entries | 1,500 entries | VLAN IDs | 4094 |
| Default power supply | PWR-C5-600WAC | Default power supply wattage | 600W AC |
| Power supply slots | 2 slots (second supply optional) | Default PoE budget | 370W with one PWR-C5-600WAC |
| Expanded PoE budget | 740W with a second PWR-C5-600WAC | DC power option | PWR-C5-715WDC= (spare only, IOS XE 17.8.1+): 485W PoE single-supply, 740W dual-supply |
| Power supply BTU | 2047.3 BTU/hr at 600W output | Fan design | 2 fixed fans (non-removable) |
| Stacking architecture | StackWise-80 | Stack bandwidth | 80 Gbps, up to 8 members |
| Stacking accessory | C9200L-STACK-KIT (ordered separately) | Operating temperature | -5 to 45degC (up to 1500m); -5 to 40degC (up to 3000m) |
| Storage temperature | -40 to 70degC | Operating humidity | 5% to 90% noncondensing |
| Operating altitude | Up to 10,000 ft (3000m) | Acoustic noise | 42 dB LpA typical / 45 dB LpA max (24-port PoE+ group, AC power, loaded) |
| Dimensions (chassis only) | 1.73 x 17.5 x 11.3 in (4.4 x 44.5 x 28.8 cm) | Dimensions (with fan FRU and power supply) | 1.73 x 17.5 x 12.9 in (4.4 x 44.5 x 32.9 cm) |
| Weight | 10.38 lb (4.71 kg) | MTBF | 390,310 hours |
| Minimum Cisco IOS XE release | 16.9.2 or later | Safety compliance | IEC/UL/CSA/EN 60950-1 and 62368-1, Class I Equipment |
| EMC compliance | CISPR 32 Class A, EN 55032 Class A, FCC Part 15, ICES-003 Class A (and related regional EMC standards) | Environmental compliance | RoHS 5 |
| Warranty | Cisco Enhanced Limited Lifetime Warranty |
Get More Information
Need pricing, stock, or shipping details for the C9200L-24P-4X-A ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email sales@layer23-switch.com for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
-
What is Cisco C9200L-24P-4X-A designed for?
-
How is C9200L-24P-4X-A different from C9200L-24P-4X-E?
-
Does C9200L-24P-4X-A provide PoE+?
-
Can C9200L-24P-4X-A use modular uplinks?
-
Can C9200L-24P-4X-A be stacked?
-
How is C9200L-24P-4X-A different from C9200-24P-A?
-
When should I choose C9300L-24P-4X-A instead?
-
When is C9200L-24P-4X-A more than the site needs?
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.
Our operations team reported no incidents since deployment. Best compliment possible.
Layer23 shipped ahead of the quoted lead time. Pleasant surprise. Minor delay in delivery, but everything was in order.
The quote came back with clear line items. Easy for our finance team to approve.
Professional packing. No issues with receipt.
You kept your word. I like that. Good business.