C9300L-48P-4G-E
424 Gbps
C9200L-48P-4G-E
184 Gbps
Cisco switch comparison
C9300L-48P-4G-E vs C9200L-48P-4G-E
A key difference between Cisco C9300L-48P-4G-E and C9200L-48P-4G-E is Switching Capacity (Stacked): C9300L-48P-4G-E — 424 Gbps; C9200L-48P-4G-E — 184 Gbps. They also differ in Forwarding Rate (Stacked) (315.48 Mpps vs 137 Mpps) and Default PoE Budget (505 W vs 740 W). The C9300L-48P-4G-E has the higher published value for this metric. Keep the Cisco test mode and packet profile the same when sizing traffic. The table below shows 68 specifications available for both models. Confirm licenses, accessories, power supplies and regional suffixes before ordering.
2models compared
68specs shown for every model
33differences found
Change comparison
Select different models
At-a-glance comparison
Key performance and configuration differences
Start with the differences that have the greatest effect on capacity, connectivity, software, power and deployment fit.
C9300L-48P-4G-E
315.48 Mpps
C9200L-48P-4G-E
137 Mpps
C9300L-48P-4G-E
505 W
C9200L-48P-4G-E
740 W
C9300L-48P-4G-E
PWR-C1-715WAC-P
C9200L-48P-4G-E
PWR-C5-1KWAC
C9300L-48P-4G-E
StackWise-320
C9200L-48P-4G-E
StackWise-80
C9300L-48P-4G-E
320 Gbps
C9200L-48P-4G-E
80 Gbps
Buying decision
How to choose between C9300L-48P-4G-E and C9200L-48P-4G-E
Review the differences in this order to identify the model that best fits the intended deployment.
-
01
Ports and uplinks
Match access media, port count and speed first, then confirm that the uplink design fits the distribution layer.
-
02
PoE and power
Total the power required by connected devices and verify the PoE standard, budget, power supplies and redundancy.
-
03
Performance and software
Compare forwarding, stacking and scale in the intended topology, then confirm the license tier and software release.
Before ordering
Confirm the exact Product ID, license tier, power supplies, accessories and regional requirements.
Free product-selection help
Need help deciding between these Cisco models?
Send your port, performance, license, quantity or deployment requirements. A CCIE-level network engineer will review the shortlist and help identify the better-fit Product ID.
Detailed comparison
Full specification comparison
| Comparison parameter | ||
|---|---|---|
| Product ID | C9300L-48P-4G-E | C9200L-48P-4G-E |
| Product and ordering | ||
| Product TypeDifferent | C9300L-48P-4G-E Cisco Catalyst 9300L Series fixed-uplink stackable access switch | C9200L-48P-4G-E Cisco Catalyst 9200L Series fixed-uplink stackable access switch |
| Form Factor | C9300L-48P-4G-E 1RU | C9200L-48P-4G-E 1RU |
| Switch Role | C9300L-48P-4G-E Campus access switch | C9200L-48P-4G-E Campus access switch |
| Network License | C9300L-48P-4G-E Network Essentials | C9200L-48P-4G-E Network Essentials |
| Configuration, licensing and management | ||
| Management Model | C9300L-48P-4G-E Cisco Catalyst Center, WebUI, CLI, NETCONF, RESTCONF and SNMP | C9200L-48P-4G-E Cisco Catalyst Center, WebUI, CLI, NETCONF, RESTCONF and SNMP |
| Ports and interfaces | ||
| Downlink Port Count | C9300L-48P-4G-E 48 | C9200L-48P-4G-E 48 |
| Access / Downlink Ports | C9300L-48P-4G-E 48 x 10/100/1000 PoE+ RJ-45 | C9200L-48P-4G-E 48 x 1G PoE+ RJ-45 |
| Downlink Type | C9300L-48P-4G-E 1G PoE+ RJ-45 | C9200L-48P-4G-E 1G PoE+ RJ-45 |
| Uplink Interfaces | C9300L-48P-4G-E 4 x 1G SFP | C9200L-48P-4G-E 4 x 1G SFP |
| Maximum Uplink Speed | C9300L-48P-4G-E 1 Gbps | C9200L-48P-4G-E 1 Gbps |
| Supported Network Modules | C9300L-48P-4G-E Not applicable | C9200L-48P-4G-E Not applicable |
| Management Ports | C9300L-48P-4G-E 1 x 10/100/1000BASE-T dedicated management port | C9200L-48P-4G-E 1 x 10/100/1000BASE-T dedicated management port |
| Console Ports | C9300L-48P-4G-E 1 x RJ-45; 1 x USB Mini-B console | C9200L-48P-4G-E 1 x RJ-45; 1 x USB Mini-B console |
| USB Ports | C9300L-48P-4G-E 1 x USB 2.0 Type-A host port | C9200L-48P-4G-E 1 x USB 2.0 Type-A host port |
| PoE-capable Ports | C9300L-48P-4G-E 48 | C9200L-48P-4G-E 48 |
| Connector TypesDifferent | C9300L-48P-4G-E RJ-45; SFP/SFP+/SFP28/QSFP; USB | C9200L-48P-4G-E RJ-45; SFP/SFP+; USB |
| Total System Ports | C9300L-48P-4G-E 52 | C9200L-48P-4G-E 52 |
| Performance and scale | ||
| Switching Capacity (Standalone) | C9300L-48P-4G-E 104 Gbps | C9200L-48P-4G-E 104 Gbps |
| Switching Capacity (Stacked)Different | C9300L-48P-4G-E 424 Gbps | C9200L-48P-4G-E 184 Gbps |
| Forwarding Rate (Standalone) | C9300L-48P-4G-E 77.38 Mpps | C9200L-48P-4G-E 77.38 Mpps |
| Forwarding Rate (Stacked)Different | C9300L-48P-4G-E 315.48 Mpps | C9200L-48P-4G-E 137 Mpps |
| MAC Address ScaleDifferent | C9300L-48P-4G-E 32,000 | C9200L-48P-4G-E 16,000 |
| IPv4 Route ScaleDifferent | C9300L-48P-4G-E 32,000 | C9200L-48P-4G-E 3,000 |
| IPv6 Route ScaleDifferent | C9300L-48P-4G-E 16,000 | C9200L-48P-4G-E 1,500 |
| Multicast Route ScaleDifferent | C9300L-48P-4G-E 8,000 | C9200L-48P-4G-E 1,000 |
| VLAN Scale | C9300L-48P-4G-E 4,094 | C9200L-48P-4G-E 4,094 |
| ACL ScaleDifferent | C9300L-48P-4G-E 5,120 | C9200L-48P-4G-E 1,500 |
| QoS ScaleDifferent | C9300L-48P-4G-E 5,120 | C9200L-48P-4G-E 1,000 |
| Packet BufferDifferent | C9300L-48P-4G-E 16 MB | C9200L-48P-4G-E 6 MB |
| Jumbo Frame Size | C9300L-48P-4G-E 9,198 bytes | C9200L-48P-4G-E 9,198 bytes |
| Flexible NetFlow EntriesDifferent | C9300L-48P-4G-E 64,000 | C9200L-48P-4G-E 16,000 |
| Switched Virtual InterfacesDifferent | C9300L-48P-4G-E 1,000 | C9200L-48P-4G-E 512 |
| PoE and power | ||
| PoE Support | C9300L-48P-4G-E PoE/PoE+ | C9200L-48P-4G-E PoE/PoE+ |
| PoE Standard | C9300L-48P-4G-E IEEE 802.3af / 802.3at | C9200L-48P-4G-E IEEE 802.3af / 802.3at |
| Default PoE BudgetDifferent | C9300L-48P-4G-E 505 W | C9200L-48P-4G-E 740 W |
| Maximum PoE Budget | C9300L-48P-4G-E 1,440 W | C9200L-48P-4G-E 1,440 W |
| Default Power SupplyDifferent | C9300L-48P-4G-E PWR-C1-715WAC-P | C9200L-48P-4G-E PWR-C5-1KWAC |
| Power Supply Slots | C9300L-48P-4G-E 2 | C9200L-48P-4G-E 2 |
| Power Supply OptionsDifferent | C9300L-48P-4G-E 350W, 715W, 1100W and supported 1900W AC/HVDC power supplies | C9200L-48P-4G-E Compatible C5/C6 AC supplies; supported DC supply on PoE models |
| Maximum System PowerDifferent | C9300L-48P-4G-E 90.01 W | C9200L-48P-4G-E 59.1 W |
| AC Input Voltage | C9300L-48P-4G-E 100 to 240 V | C9200L-48P-4G-E 100 to 240 V |
| AC Input FrequencyDifferent | C9300L-48P-4G-E 47 to 63 Hz | C9200L-48P-4G-E 50 to 60 Hz |
| Power Input TypeDifferent | C9300L-48P-4G-E AC input; supported AC/HVDC options depend on power-supply model | C9200L-48P-4G-E AC input; optional DC power supplies on supported modular and fixed-uplink PoE models |
| Heat DissipationDifferent | C9300L-48P-4G-E 307 BTU/h | C9200L-48P-4G-E 202 BTU/h |
| Power RedundancyDifferent | C9300L-48P-4G-E Dual redundant field-replaceable power supplies | C9200L-48P-4G-E Redundant power with an optional second compatible supply |
| Stacking and resiliency | ||
| Stacking TechnologyDifferent | C9300L-48P-4G-E StackWise-320 | C9200L-48P-4G-E StackWise-80 |
| Stack BandwidthDifferent | C9300L-48P-4G-E 320 Gbps | C9200L-48P-4G-E 80 Gbps |
| Maximum Stack Members | C9300L-48P-4G-E 8 | C9200L-48P-4G-E 8 |
| StackPower | C9300L-48P-4G-E Not applicable | C9200L-48P-4G-E Not applicable |
| Fan ModulesDifferent | C9300L-48P-4G-E 3 field-replaceable fans with N+1 redundancy | C9200L-48P-4G-E Fixed redundant fans |
| Memory and software | ||
| Operating System | C9300L-48P-4G-E Cisco IOS XE | C9200L-48P-4G-E Cisco IOS XE |
| Minimum Software ReleaseDifferent | C9300L-48P-4G-E Cisco IOS XE 16.11.1c | C9200L-48P-4G-E Cisco IOS XE 16.9.1 or later |
| DRAMDifferent | C9300L-48P-4G-E 8 GB | C9200L-48P-4G-E 2 GB |
| Flash MemoryDifferent | C9300L-48P-4G-E 16 GB | C9200L-48P-4G-E 4 GB |
| CPUDifferent | C9300L-48P-4G-E x86 CPU complex | C9200L-48P-4G-E Not listed |
| Physical and environmental | ||
| Dimensions (H × W × D)Different | C9300L-48P-4G-E 44 × 445 × 449 mm | C9200L-48P-4G-E 44 × 445 × 329 mm |
| WeightDifferent | C9300L-48P-4G-E 7.03 kg | C9200L-48P-4G-E 4.8 kg |
| Operating Temperature | C9300L-48P-4G-E -5 to 45 °C; -5 to 40 °C | C9200L-48P-4G-E -5 to 45 °C; -5 to 40 °C |
| Storage Temperature | C9300L-48P-4G-E -40 to 70 °C | C9200L-48P-4G-E -40 to 70 °C |
| Operating Humidity | C9300L-48P-4G-E 5% to 90% | C9200L-48P-4G-E 5% to 90% |
| Operating Altitude | C9300L-48P-4G-E Up to 3,048 m | C9200L-48P-4G-E Up to 3,048 m |
| MTBFDifferent | C9300L-48P-4G-E 314,140 hours | C9200L-48P-4G-E 347,760 hours |
| Warranty | C9300L-48P-4G-E Cisco Enhanced Limited Lifetime hardware warranty (E-LLW) | C9200L-48P-4G-E Cisco Enhanced Limited Lifetime hardware warranty (E-LLW) |
| Acoustic RatingDifferent | C9300L-48P-4G-E LpA 44 dBA typical; 47 dBA maximum (ISO 7779/9296, 25°C) | C9200L-48P-4G-E 42 dBA typical; 45 dBA maximum |
| Environmental Compliance | C9300L-48P-4G-E RoHS compliant | C9200L-48P-4G-E RoHS compliant |
| Safety Certifications | C9300L-48P-4G-E UL/CSA 60950-1; EN/IEC 60950-1 | C9200L-48P-4G-E UL/CSA 60950-1; EN/IEC 60950-1 |
| EMC CertificationsDifferent | C9300L-48P-4G-E FCC Part 15 Class A; EN 55032 Class A; CISPR 32 Class A | C9200L-48P-4G-E FCC Part 15 Class A; EN 55032 Class A; CISPR 32 Class A; ICES-003 Class A |
| Mounting | C9300L-48P-4G-E 19-inch rack mount | C9200L-48P-4G-E 19-inch rack mount |
| Airflow | C9300L-48P-4G-E Front-to-back airflow | C9200L-48P-4G-E Front-to-back airflow |
“Not listed” means that no confirmed value is currently available for that model and parameter.
Price, stock & lead time
Get pricing for the exact models you compared
Use the exact Product ID when requesting a quote, because suffixes can identify different licenses, regions or configurations. Open an available product page for details and pricing, or request a project quote from our team.
Browse all Cisco switchesRelated comparisons
More Cisco switch comparisons
Catalyst 9200 Switches
C9200L-48P-4G-EVSC9200L-48P-4X-E
Compare C9200L-48P-4G-E vs C9200L-48P-4X-E
Catalyst 9200 Switches
C9200L-48P-4G-EVSWS-C2960X-48FPS-L
Compare C9200L-48P-4G-E vs WS-C2960X-48FPS-L
Catalyst 9200 Switches
C9200L-48P-4G-EVSWS-C2960X-48LPS-L
Compare C9200L-48P-4G-E vs WS-C2960X-48LPS-L
View all popular Cisco Switch Comparisons →