C9300L-48P-4G-E
4 x 1G SFP
C9300L-48P-4X-E
4 x 1/10G SFP+
Cisco switch comparison
C9300L-48P-4G-E vs C9300L-48P-4X-E
A key difference between Cisco C9300L-48P-4G-E and C9300L-48P-4X-E is Uplink Interfaces: C9300L-48P-4G-E — 4 x 1G SFP; C9300L-48P-4X-E — 4 x 1/10G SFP+. They also differ in Maximum Uplink Speed (1 Gbps vs 10 Gbps) and Switching Capacity (Standalone) (104 Gbps vs 176 Gbps). Match the uplink design to your distribution layer: 4 x 1G SFP on the C9300L-48P-4G-E versus 4 x 1/10G SFP+ on the C9300L-48P-4X-E. The table below shows 69 specifications available for both models. Confirm licenses, accessories, power supplies and regional suffixes before ordering.
2models compared
69specs shown for every model
9differences found
Change comparison
Select different models
At-a-glance comparison
Key performance and configuration differences
Start with the differences that have the greatest effect on capacity, connectivity, software, power and deployment fit.
C9300L-48P-4G-E
1 Gbps
C9300L-48P-4X-E
10 Gbps
C9300L-48P-4G-E
104 Gbps
C9300L-48P-4X-E
176 Gbps
C9300L-48P-4G-E
424 Gbps
C9300L-48P-4X-E
496 Gbps
C9300L-48P-4G-E
77.38 Mpps
C9300L-48P-4X-E
130.95 Mpps
C9300L-48P-4G-E
315.48 Mpps
C9300L-48P-4X-E
369.05 Mpps
Buying decision
How to choose between C9300L-48P-4G-E and C9300L-48P-4X-E
Review the differences in this order to identify the model that best fits the intended deployment.
-
01
Ports and uplinks
Match access media, port count and speed first, then confirm that the uplink design fits the distribution layer.
-
02
PoE and power
Total the power required by connected devices and verify the PoE standard, budget, power supplies and redundancy.
-
03
Performance and software
Compare forwarding, stacking and scale in the intended topology, then confirm the license tier and software release.
Before ordering
Confirm the exact Product ID, license tier, power supplies, accessories and regional requirements.
Free product-selection help
Need help deciding between these Cisco models?
Send your port, performance, license, quantity or deployment requirements. A CCIE-level network engineer will review the shortlist and help identify the better-fit Product ID.
Detailed comparison
Full specification comparison
| Comparison parameter | ||
|---|---|---|
| Product ID | C9300L-48P-4G-E | C9300L-48P-4X-E |
| Product and ordering | ||
| Product Type | Cisco Catalyst 9300L Series fixed-uplink stackable access switch | Cisco Catalyst 9300L Series fixed-uplink stackable access switch |
| Form Factor | 1RU | 1RU |
| Switch Role | Campus access switch | Campus access switch |
| Network License | Network Essentials | Network Essentials |
| Configuration, licensing and management | ||
| Management Model | Cisco Catalyst Center, WebUI, CLI, NETCONF, RESTCONF and SNMP | Cisco Catalyst Center, WebUI, CLI, NETCONF, RESTCONF and SNMP |
| Ports and interfaces | ||
| Downlink Port Count | 48 | 48 |
| Access / Downlink Ports | 48 x 10/100/1000 PoE+ RJ-45 | 48 x 10/100/1000 PoE+ RJ-45 |
| Downlink Type | 1G PoE+ RJ-45 | 1G PoE+ RJ-45 |
| Uplink Interfaces | 4 x 1G SFP | 4 x 1/10G SFP+ |
| Maximum Uplink Speed | 1 Gbps | 10 Gbps |
| Supported Network Modules | Not applicable | Not applicable |
| Management Ports | 1 x 10/100/1000BASE-T dedicated management port | 1 x 10/100/1000BASE-T dedicated management port |
| Console Ports | 1 x RJ-45; 1 x USB Mini-B console | 1 x RJ-45; 1 x USB Mini-B console |
| USB Ports | 1 x USB 2.0 Type-A host port | 1 x USB 2.0 Type-A host port |
| PoE-capable Ports | 48 | 48 |
| Connector Types | RJ-45; SFP/SFP+/SFP28/QSFP; USB | RJ-45; SFP/SFP+/SFP28/QSFP; USB |
| Total System Ports | 52 | 52 |
| Performance and scale | ||
| Switching Capacity (Standalone) | 104 Gbps | 176 Gbps |
| Switching Capacity (Stacked) | 424 Gbps | 496 Gbps |
| Forwarding Rate (Standalone) | 77.38 Mpps | 130.95 Mpps |
| Forwarding Rate (Stacked) | 315.48 Mpps | 369.05 Mpps |
| MAC Address Scale | 32,000 | 32,000 |
| IPv4 Route Scale | 32,000 | 32,000 |
| IPv6 Route Scale | 16,000 | 16,000 |
| Multicast Route Scale | 8,000 | 8,000 |
| VLAN Scale | 4,094 | 4,094 |
| ACL Scale | 5,120 | 5,120 |
| QoS Scale | 5,120 | 5,120 |
| Packet Buffer | 16 MB | 16 MB |
| Jumbo Frame Size | 9,198 bytes | 9,198 bytes |
| Flexible NetFlow Entries | 64,000 | 64,000 |
| Switched Virtual Interfaces | 1,000 | 1,000 |
| PoE and power | ||
| PoE Support | PoE/PoE+ | PoE/PoE+ |
| PoE Standard | IEEE 802.3af / 802.3at | IEEE 802.3af / 802.3at |
| Default PoE Budget | 505 W | 505 W |
| Maximum PoE Budget | 1,440 W | 1,440 W |
| Default Power Supply | PWR-C1-715WAC-P | PWR-C1-715WAC-P |
| Power Supply Slots | 2 | 2 |
| Power Supply Options | 350W, 715W, 1100W and supported 1900W AC/HVDC power supplies | 350W, 715W, 1100W and supported 1900W AC/HVDC power supplies |
| Maximum System Power | 90.01 W | 94.13 W |
| AC Input Voltage | 100 to 240 V | 100 to 240 V |
| AC Input Frequency | 50 to 60 Hz | 50 to 60 Hz |
| Power Input Type | AC input; supported AC/HVDC options depend on power-supply model | AC input; supported AC/HVDC options depend on power-supply model |
| Heat Dissipation | 307 BTU/h | 321 BTU/h |
| Power Redundancy | Dual redundant field-replaceable power supplies | Dual redundant field-replaceable power supplies |
| Stacking and resiliency | ||
| Stacking Technology | StackWise-320 | StackWise-320 |
| Stack Bandwidth | 320 Gbps | 320 Gbps |
| Maximum Stack Members | 8 | 8 |
| StackPower | Not applicable | Not applicable |
| Fan Modules | 3 field-replaceable fans with N+1 redundancy | 3 field-replaceable fans with N+1 redundancy |
| Memory and software | ||
| Operating System | Cisco IOS XE | Cisco IOS XE |
| Minimum Software Release | Cisco IOS XE 16.11.1c | Cisco IOS XE 16.11.1c |
| DRAM | 8 GB | 8 GB |
| Flash Memory | 16 GB | 16 GB |
| CPU | x86 CPU complex | x86 CPU complex |
| Physical and environmental | ||
| Dimensions (H × W × D) | 44 × 445 × 449 mm | 44 × 445 × 449 mm |
| Weight | 7.03 kg | 7.03 kg |
| Operating Temperature | -5 to 45 °C; -5 to 40 °C | -5 to 45 °C; -5 to 40 °C |
| Storage Temperature | -40 to 70 °C | -40 to 70 °C |
| Operating Humidity | 5% to 90% | 5% to 90% |
| Operating Altitude | Up to 3,048 m | Up to 3,048 m |
| MTBF | 314,140 hours | 309,020 hours |
| Warranty | Cisco Enhanced Limited Lifetime hardware warranty (E-LLW) | Cisco Enhanced Limited Lifetime hardware warranty (E-LLW) |
| Acoustic Rating | LpA 44 dBA typical; 47 dBA maximum (ISO 7779/9296, 25°C) | LpA 44 dBA typical; 47 dBA maximum (ISO 7779/9296, 25°C) |
| Environmental Compliance | RoHS compliant | RoHS compliant |
| Safety Certifications | UL/CSA 60950-1; EN/IEC 60950-1 | UL/CSA 60950-1; EN/IEC 60950-1 |
| EMC Certifications | FCC Part 15 Class A; EN 55032 Class A; CISPR 32 Class A | FCC Part 15 Class A; EN 55032 Class A; CISPR 32 Class A |
| Mounting | 19-inch rack mount | 19-inch rack mount |
| Airflow | Front-to-back airflow | Front-to-back airflow |
“Not listed” means that no confirmed value is currently available for that model and parameter.
Price, stock & lead time
Get pricing for the exact models you compared
Use the exact Product ID when requesting a quote, because suffixes can identify different licenses, regions or configurations. Open an available product page for details and pricing, or request a project quote from our team.
Browse all Cisco switchesRelated comparisons