Find Cisco 40G optical modules for QSFP and QSFP+ aggregation, spine, core, and data center interconnect links where MPO polarity, duplex BiDi migration, 4x10G breakout, fiber plant reuse, and platform support are critical. Compare SR4, CSR4, LR4, BiDi, DAC, AOC, MPO or LC cabling, MMF or SMF reach, compatibility, and exact Cisco SKU.
Showing all 11 results
40G SR-BiDi QSFP – LC MMF – 150m OM4
40G SR4 QSFP – MPO-12 MMF – 4x10G Breakout
40G SR4 S-Class QSFP – MPO-12 MMF – No Breakout
40G QSFP+ Breakout – 4x10G SFP+ DAC – 1m Length
40G QSFP+ Breakout – 4x10G SFP+ AOC – 10m Length
40G QSFP+ Active Copper – 10m Length – Direct-Attach Cable
40G QSFP+ AOC – 15m Length – Active Optical Cable
40G QSFP+ AOC – 2m Length – Active Optical Cable
40G QSFP+ AOC – 3m Length – Active Optical Cable
40G QSFP DAC – 5m Length – Passive Copper Cable
Cisco 40G Optical Modules are used for 40 Gigabit Ethernet links between compatible Cisco switches, routers, and data center platforms. They are common in aggregation, spine, core, and high-bandwidth interconnect designs.
Choose by matching the QSFP or QSFP+ port, required distance, fiber type, connector, breakout requirement, and platform compatibility. The exact module type matters because 40G optics can differ significantly in cabling and use case.
SR4 and CSR4 are commonly used with multimode parallel fiber, LR4 is used for longer single-mode links, and BiDi can support 40G over duplex multimode fiber in supported designs. Confirm cabling and platform support before choosing.
Some Cisco 40G modules use MPO or MTP connectors for parallel fiber, while others use LC connectors. Connector choice affects patching, migration cost, breakout options, and whether the existing fiber plant can be reused.
Some 40G QSFP modules support 4x10G breakout, while others do not. Breakout support depends on the optic, cable, platform, and port configuration, so it should be confirmed before planning migration or server connectivity.
Use 40G DAC for short copper rack connections, AOC for short active optical links, and transceiver modules for structured fiber or longer distances. The decision depends on link length, cable pathway, power use, and platform support.
No. Cisco 40G optics must be supported by the exact platform, port, and software release. Check the Cisco compatibility matrix before assuming a QSFP module will work in a specific switch or router.
Fiber type, connector format, polarity, distance, insertion loss, and patch-panel design all matter. A 40G upgrade can fail if the existing fiber plant does not match the optic's cabling and optical budget requirements.
Common causes include unsupported optics, wrong connector, polarity mismatch, dirty fiber, excessive link loss, incorrect breakout configuration, incompatible software, or using a module that does not support the intended mode.
Verify exact Cisco SKU, QSFP support, optic type, reach, connector, fiber type, breakout needs, platform compatibility, software release, cable plant readiness, condition, warranty, and lead time before purchasing.
Cisco 40G Optical Modules are often chosen when a network needs higher uplink bandwidth without moving immediately to 100G. They remain a practical option for data center interconnects, switch uplinks, aggregation links, and projects that already have established 40G infrastructure in place. This category is built for buyers who need to compare Cisco 40G optics by port type, fiber type, link distance, and platform compatibility before placing an order.
Notifications