CS-MIC-TABLE-J – 4-Pin Mini Jack – 7.5 m Cable – Cisco Table Microphone
Established Global IT Distributor
With over a decade of industry experience, we are a certified Cisco Partner delivering genuine enterprise networking hardware and trusted services to system integrators, ISPs, and enterprises worldwide.
CS-MIC-TABLE-J Description
The CS-MIC-TABLE-J is the Cisco Table Microphone supplied with a 4-pin mini jack connector on a 7.5-metre cable, a balanced omnidirectional boundary-layer microphone for rooms with fixed tables. Its value sits in reach across the installed base rather than in processing: its compatibility list runs far past what the digital Table Microphone Pro supports, covering Room Bar and Room Bar Pro, Room Kit, Room Kit Plus, Room Kit EQ, Room Kit EQX and Room Kit Pro, Room 55, Room 55 Dual, Room 70 and Room 70 G2, the SX10, SX20 and SX80 codecs, MX700 and MX800, Board Pro 55 and 75 in both generations, and the Room Panorama series. Frequency response runs 80 Hz to 20 kHz within plus or minus 6 dB, wider at both ends than the digital Table Microphone Pro, with free-field sensitivity of -34 dB and a signal-to-noise ratio of at least 70 dB. Pickup covers a 1.5-metre radius through 360 degrees. Power arrives as 9V or 52V phantom power from the codec rather than over Ethernet, and the 6.39-centimetre disc either recesses into the table or rests on a magnetic table plate. A mute button and status LED sit on the unit itself.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
CS-MIC-TABLE-J |
|
Cisco ordering description |
Cisco Table Microphone with 4-pin mini jack connector, 7.5 metres cable |
|
Description |
Balanced omnidirectional table microphone, boundary layer type |
|
Frequency range |
80 Hz to 20 kHz, plus or minus 6 dB |
|
Free field sensitivity |
-34 dB plus or minus 3 dB rel 1V/Pa at 1 kHz |
|
Pickup range |
1.5 m radius with 360-degree coverage |
|
Phantom power |
9V or 52V |
|
Physical dimensions |
6.39 cm diameter by 1.09 cm high (2.52 in by 0.43 in) |
|
Weight |
0.28 lb (0.126 kg) |
Product Performance
Key Features
The microphone attaches to Room Bar and Room Bar Pro, Room Kit, Room Kit Plus, Room Kit EQ, Room Kit EQX and Room Kit Pro, Room 55 and Room 55 Dual, Room 70 and Room 70 G2, SX10, SX20 and SX80, MX700 and MX800, Board Pro 55 and 75 in both generations, and the Room Panorama series; the digital Table Microphone Pro supports only a subset of that list.
Response runs 80 Hz to 20 kHz within plus or minus 6 dB, extending further at both ends than the 100 Hz to 16 kHz published for the Table Microphone Pro.
The unit takes 9V or 52V phantom power from the connected system, so it consumes an analogue audio input rather than an Ethernet port and needs no PoE budget.
The disc recesses into the table for a flush finish, or rests on a magnetic table plate where drilling the surface is not permitted.
A mute and unmute button sits on the microphone with an LED showing mute status, so participants can silence the room without reaching the touch controller.
The product line offers a 4-pin mini jack version on a 7.5-metre cable as CS-MIC-TABLE-J and a 4-pin Euroblock version on a 9-metre cable as CS-MIC-TABLE-E, matching the input the codec presents.
Application Scenarios
Specified for estates still running SX10, SX20, SX80, MX700 or MX800 systems, which the digital Table Microphone Pro does not support.
Chosen where the room has no free network port or PoE budget for an IP microphone and the codec’s analogue input is available.
Used on leased or heritage furniture where the magnetic table plate seats the microphone without a permanent fixing.
Selection Guide
1. Take This Unit For Platform Reach, Not For Processing
CS-MIC-TABLE-J is the 4-pin mini jack version on a 7.5-metre cable and CS-MIC-TABLE-E the 4-pin Euroblock version on a 9-metre cable; the acoustic specification is the same and the choice follows the input on the codec. Against the digital Cisco Table Microphone Pro the trade is explicit. This unit covers a much wider platform list, reaching SX, MX, Room 55 and Room 70 systems the Pro does not support, and reproduces a wider 80 Hz to 20 kHz span. It provides no adaptive voice capture, no speaker tracking support, no extension of the deployment through an Ethernet switch, no cloud device management in Control Hub and no AES-128 audio encryption, all of which the Pro carries. Power is the other structural difference: 9V or 52V phantom power from the codec here against 5W Power over Ethernet on the Pro, so this unit occupies an analogue input rather than a network port. Cable reach is fixed at 7.5 metres unless CAB-MIC-EXT-J= adds a further 9 metres, and CAB-MIC-TABLE-J= is the spare cable while CS-MIC-TABLE-PLA= supplies replacement table-top metal plates in packs of three.
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | CS-MIC-TABLE-J | Cisco ordering description | Cisco Table Microphone with 4-pin mini jack connector, 7.5 meters cable, ordered as CS-MIC-TABLE-J= |
| Description | Balanced omnidirectional table microphone, boundary layer type | Connector | 4-pin mini jack, with a 4-pin Euroblock version available separately as CS-MIC-TABLE-E= |
| Cable length | 7.5 metres | Product compatibility | Room Bar, Room Bar Pro, Room Kit, Room Kit Plus, Room Kit EQ, Room Kit EQX, Room Kit Pro, Room 55, Room 55 Dual, Room 70, Room 70 G2, SX10, SX20, SX80, MX700, MX800, Board Pro 55/75, Board Pro 55/75 G2 and the Room Panorama Series |
| Frequency range | 80 Hz to 20 kHz, plus or minus 6 dB | Free field sensitivity | -34 dB plus or minus 3 dB rel 1V/Pa at 1 kHz |
| Signal-to-noise ratio | Minimum 70 dB | Pickup range | 1.5 m radius with 360-degree coverage |
| Mute functionality | LED showing mute status with a mute and unmute button on the device | Phantom power | 9V or 52V |
| Physical dimensions | Round shape at 6.39 cm diameter by 1.09 cm (2.52 in diameter by 0.43 in) | Weight | 0.28 lb (0.126 kg) |
| Mounting | Tabletop, either recessed into the table or placed on a magnetic table plate | Colour | White |
| Adaptive voice capture | Not supported on this model | Speaker tracking support | Not supported on this model |
| Scalability via switch | Not supported; the microphone connects to a codec audio input rather than an Ethernet network | Automatic positioning | Not supported on this model |
| Cloud device management | Not supported on this model | Audio encryption | AES-128 audio encryption is not supported on this model |
| Extension cable | CAB-MIC-EXT-J= adds 9 metres for 4-pin mini jack cables | Spare part numbers | CAB-MIC-TABLE-J= spare cable for the 4-pin mini jack connector and CS-MIC-TABLE-PLA= spare table-top metal plate in packs of three |
Get More Information
Need pricing, stock, or shipping details for the CS-MIC-TABLE-J ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email sales@layer23-switch.com for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.
