IE-3100-8P2C-E – 8xGE PoE/PoE+ Ports – 2xGE Combo Uplinks – 240W PoE Budget
Shop Expert-Recommended Accessories for the IE-3100-8P2C-E
Explore optics, stacking accessories, modules, and power supplies—all verified by our engineers for use with this model.-
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOMOriginal price was: $1,260.58.$95.80Current price is: $95.80. -
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m ReachOriginal price was: $570.10.$70.00Current price is: $70.00. -
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOMOriginal price was: $633.46.$59.00Current price is: $59.00. -
GLC-EX-SMD
1000BASE-EX SFP - 40km SMF - DOMOriginal price was: $2,527.49.$205.00Current price is: $205.00. -
GLC-ZX-SMD
1000BASE-ZX SFP - 70km SMF - EXT DOMOriginal price was: $5,061.30.$215.70Current price is: $215.70. -
PWR-IE240W-PCAC-L
240W AC PSU - 54V PoE Output - Hardwired DIN-RailOriginal price was: $4,407.90.$1,098.70Current price is: $1,098.70. -
PWR-IE480W-PCAC-L
480W AC PSU - 54V PoE Output - DIN-RailOriginal price was: $3,160.94.$1,388.49Current price is: $1,388.49.
Why Layer23-Switch
Stocked, Shipped and Supported by One Team
Ships in 1 Business Day
In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.
LSCare Warranty
3years on enterprise equipment
Free CCIE Support
Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.
Verify Before You Pay
100%factory-sealed
Get label and serial photos before shipment, and check every serial number with Cisco.
IE-3100-8P2C-E Description
The IE-3100-8P2C-E is a Cisco Catalyst IE3100 Rugged Series industrial switch for DIN-rail cabinets that power cameras, phones and access points over copper. The switch has eight Gigabit PoE/PoE+ ports at up to 30W each, two 1000BASE-T/1000BASE-X combo uplinks and a 240W PoE budget on dual DC inputs from 12V to 54V. The 240W budget requires an input of 52.5V to 60V, and PoE requires Cisco IOS XE 17.15.1 or later.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
IE-3100-8P2C-E |
|
Product type |
Industrial Ethernet switch |
|
Network license |
Network Essentials |
|
Total ports |
10 |
|
PoE copper downlink ports |
8 x 1000BASE-T PoE/PoE+ RJ-45 ports |
|
Combo uplink ports |
2 x 1000BASE-T/1000BASE-X dual-media ports |
|
Default PoE budget |
240 W |
|
PoE output note |
Up to 30 W PoE+ output on all 8 downlink ports |
|
Power inputs |
Dual DC inputs |
|
Input voltage range |
12 to 54 VDC nominal |
|
Power consumption |
26 W excluding PoE load |
|
Minimum PoE software support |
Cisco IOS XE 17.15.1 |
Product Performance
Key Features
All eight RJ45 downlinks supply up to 30W under 802.3at and also work with 802.3af devices, so one cabinet switch covers cameras, phones and sensors.
The budget reaches 240W only with a 52.5V to 60V input, and the default there is 125W until it is raised. Eight 30W endpoints need that full 240W.
Each of the two uplinks works as 1000BASE-T or as a 1G SFP, with the SFP side used by default when both are connected.
PoE on this switch is available from Cisco IOS XE 17.15.1, so the powered ports stay off until the switch runs that release or later.
The switch and its PoE load share one supply, so a 170W unit leaves about 150W for PoE after the switch’s own draw. The 170W DC unit PWR-IE170W-PC-DC= is not supported.
A built-in boost converter turns a 12V or 24V input into the 54V used for PoE, and PoE operates across the 9.6V to 60V absolute input range at a lower budget.
Application Scenarios
A transportation or plant-floor cabinet can power cameras, IP phones and wireless access points from the eight PoE+ ports, which removes separate power injectors from the enclosure.
A site that backhauls over copper in one cabinet and over 1G fiber in another can use the same switch, because each combo uplink works as RJ45 or as SFP.
Where a 52.5V to 60V DC feed is available, the switch reaches its full 240W budget and can run all eight downlinks at 30W from a single supply.
Product Comparison
|
Parameter |
IE-3100-8P2C-E |
IE-3100-6P2U2C-E | ||
|---|---|---|---|---|
|
Network license |
Network Essentials |
Network Essentials |
Network Essentials |
Network Essentials |
|
Downlink ports |
8 x 10/100/1000 PoE/PoE+ RJ45 |
8 x 10/100/1000 RJ45 |
4 x 10/100/1000 PoE/PoE+ RJ45 |
6 x 10/100/1000 PoE/PoE+ RJ45 and 2 x 4PPoE RJ45 |
|
Uplink ports |
2 x 1000BASE-T/1000BASE-X combo |
2 x 1000BASE-T/1000BASE-X combo |
2 x 1000BASE-X SFP |
2 x 1000BASE-T/1000BASE-X combo |
|
Default PoE budget |
240 W |
No PoE |
120 W |
240 W |
|
Maximum PoE per port |
30 W (PoE+) |
No PoE |
30 W (PoE+) |
30 W (PoE+); 90 W (4PPoE) |
|
Power consumption |
26 W excluding PoE load |
17.7 W |
22.5 W excluding PoE load |
26 W excluding PoE load |
|
Nominal input voltage |
12V to 54V |
12V to 48V |
12V to 54V |
12V to 54V |
|
Operating temperature |
-40°C to 75°C (blower-equipped cabinet) |
-40°C to 75°C (blower-equipped cabinet) |
-40°C to 75°C (blower-equipped cabinet) |
-40°C to 75°C (blower-equipped cabinet) |
IE-3100-8P2C-E and IE-3100-8T2C-E share eight copper ports and two combo uplinks, but IE-3100-8P2C-E adds a 240 W PoE budget with up to 30 W per port, so powered cameras and access points need it while data-only cabinets can use IE-3100-8T2C-E at 17.7 W. An endpoint that needs 90 W on a port moves to IE-3100-6P2U2C-E, which keeps 240 W and has six PoE+ ports plus two 4PPoE ports. Cabinets with only four powered endpoints and fiber uplinks can use IE-3100-4P2S-E, with a 120 W budget and two SFP-only uplinks.
PoE Power Planning
|
Planning item |
Cisco-confirmed value |
Procurement check |
|---|---|---|
|
PoE-capable ports |
8 x 1000BASE-T PoE/PoE+ downlinks |
Match endpoint count to the eight powered copper ports |
|
Documented PoE budget |
240 W |
Keep the powered endpoint worksheet within the Cisco-listed budget |
|
Per-port PoE+ output |
Up to 30 W on all 8 downlink ports |
Check endpoint class before assuming 4PPoE support |
|
Software support baseline |
Cisco IOS XE 17.15.1 and later |
Review the staged image before relying on PoE operation |
|
Input voltage range |
12 to 54 VDC nominal; 9.6 to 60 VDC absolute |
Confirm the plant power feed and power-supply output before installation |
|
Power supply sizing rule |
Switch and PoE load must fit within the installed supply wattage |
Choose a Cisco IE power supply with enough headroom for the planned load |
Ordering Checklist
- Power supply: Order PWR-IE170W-PC-AC=, PWR-IE240W-PCAC-L=, PWR-IE480W-PCAC-L= or another PoE-capable unit; PWR-IE170W-PC-DC= is not supported on this model. The switch plus its PoE load must fit inside the supply wattage.
- PoE budget setting: The default budget is 125 W at 52.5-60 V input and is raised to 240 W; a 170 W supply leaves about 150 W for PoE after the switch’s own draw. Powering eight 30 W endpoints needs a supply sized for the 240 W budget.
- SD card: Add SD-IE-1GB= or SD-IE-16GB=; the card is optional and does not ship by default. Without a card there is no stored configuration to restore when a failed switch is replaced.
- Catalyst Center subscription: Add IE3100-DNA-E-L with a -1Y, -3Y, -5Y, -7Y or -10Y term, only if Catalyst Center Essentials manages the switch. IE3100-DNA-E-L covers up to 12 ports, which fits this 10-port switch; IE3100-DNA-E-M covers up to 24.
- Rack mounting: Add STK-RACK-DINRAIL=, the 19-inch rack kit for DIN-rail mounting. The rack kit is its own order line, so it is missing unless added.
- PoE software: PoE output on this switch needs Cisco IOS XE 17.15.1 or later.
Optional Add-ons
|
Model |
Description |
|---|---|
|
65 W AC DIN-rail power supply option with PoE/PoE+ support | |
|
65 W DC DIN-rail power supply option with PoE/PoE+ support | |
|
170 W AC DIN-rail power supply option with PoE/PoE+ support | |
|
240 W AC DIN-rail power supply option with PoE/PoE+ support | |
|
PWR-IE240W-AC-IEC= |
240 W AC DIN-rail power supply option with PoE/PoE+ support |
|
PWR-IE400W-AC-IEC= |
400 W AC DIN-rail power supply option with PoE/PoE+ support |
|
480 W AC DIN-rail power supply option with PoE/PoE+ support |
IE-3100-8P2C-E Front Panel Overview
The illustrations in this section provide an overview of the variety of components available on the various switch models in this product family. Not all models are illustrated.|
Number 3494_14184f-f3> |
Feature 3494_14547e-12> |
Number 3494_f17f04-4f> |
Feature 3494_9c422b-12> |
|---|---|---|---|
|
1 3494_050e62-17> |
Dual-media SFP port LEDs 3494_6731fd-48> |
6 3494_f9b91d-a2> |
Express Setup LED 3494_bebc09-8c> |
|
2 3494_5d3037-cd> |
Dual-media copper port LEDs 3494_04ea4d-ad> |
7 3494_5b484d-6d> |
System LED 3494_e6a4cc-35> |
|
3 3494_c96a78-f2> |
1000BASE-T port LEDs 3494_a15b37-dc> |
8 3494_04ea19-3c> |
Alarm input LEDs 3494_6fdf44-ba> |
|
4 3494_b8ebf0-ff> |
Power connector LED 3494_bbc087-25> |
9 3494_d55363-aa> |
Alarm output LED 3494_8694bb-c7> |
|
5 3494_b59504-6e> |
Management console LED 3494_c65f83-cd> |
10 3494_33cd85-63> |
PoE Status LED Note This LED is present in PoE models only. 3494_526584-7f> |
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | IE-3100-8P2C-E | Product type | Industrial Ethernet switch |
| Network license | Network Essentials | Operating system | Cisco IOS XE |
| Downlink ports | 8 x 1000BASE-T PoE/PoE+ RJ-45 | Uplink ports | 2 x 1000BASE-T/1000BASE-X dual-media (combo) |
| Total ports | 10 | Console port | 1 RS-232 via RJ-45 and 1 micro USB |
| Alarm interfaces | 2 dry-contact alarm inputs and 1 alarm output | DRAM | 4 GB |
| Flash | 1.5 GB | Removable storage | 1 GB, 4 GB or 16 GB SD card (optional) |
| MAC addresses | 8,000 | VLAN IDs | 256 |
| PVST instances | 128 | IGMP snooping groups | 512 |
| Power redundancy | Dual DC inputs | DC input voltage | 12 to 54 VDC nominal; 9.6 to 60 VDC absolute |
| Input current | 7.0 A maximum (hardware installation guide); 6.1 A at 12V, 7.5 A at 24V, 5.8 A at 54V in normal operation; 80 A inrush for 1 ms at 12V, 24V or 48V | Power consumption | 26W maximum, excluding powered-device load |
| Default PoE budget | 240W | Per-port PoE power | Up to 30W PoE+ on all 8 downlink ports |
| Dimensions (H x W x D) | 5.00 x 3.00 x 5.12 in. (12.70 x 7.62 x 13.00 cm) | Mounting | DIN rail |
| Operating temperature | -40°C to 75°C in blower-equipped cabinet; -40°C to 70°C in vented cabinet; -40°C to 60°C in sealed cabinet | Storage temperature | -40°C to 85°C |
| Operating humidity | 5% to 95% noncondensing | Operating altitude | Up to 15,000 ft with no temperature derating |
| MTBF | 682,250 hours |
Quality Certifications
Customer Reviews
Questions & Answers
-
What operating temperature does IE-3100-8P2C-E support?
-
What input voltage does IE-3100-8P2C-E need for its full PoE budget?
-
Which PoE power classes does IE-3100-8P2C-E support on its eight ports?
-
What is the maximum input current of IE-3100-8P2C-E on its DC inputs?
-
How much DIN-rail space does IE-3100-8P2C-E need and how heavy is it?
-
What inrush current does IE-3100-8P2C-E draw at power-up?
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:












Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Our QA inspection took longer than the unboxing — and found nothing wrong.
Sales team had genuine product knowledge. Felt confident with their recommendations.
If you’ve found Layer23, you’ve found a vendor worth ordering from.
Good price and fast shipping.
Mission accomplished. Package secured.