C1300X-24P-4X – 24x1G PoE+ Ports – 4x10G SFP28 Uplinks – 385W PoE Budget
Why Layer23-Switch
Stocked, Shipped and Supported by One Team
Ships in 1 Business Day
In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.
LSCare Warranty
3years on enterprise equipment
Free CCIE Support
Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.
Verify Before You Pay
100%factory-sealed
Get label and serial photos before shipment, and check every serial number with Cisco.
C1300X-24P-4X Description
The C1300X-24P-4X is a Cisco Catalyst 1300X Series fixed managed Layer 3 PoE+ switch for branch offices and small businesses that power IP phones and wireless access points at the edge. The switch has 24 Gigabit PoE+ ports sharing a 385W PoE budget, four SFP28 uplinks at 10G, 128 Gbps of switching capacity and a 3 MB packet buffer. Stacking of up to eight units accepts only C1300X Family models, and OSPF v2 and v3 routing runs on this C1300X model.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C1300X-24P-4X |
|
Product type |
Fixed managed Layer 3 Gigabit Ethernet PoE+ switch |
|
PoE+ ports |
24 x 10/100/1000, 30W PoE+ per port |
|
Uplink ports |
4 x SFP28 (10G uplink, 25G available for stacking only) |
|
Default PoE budget |
385W across 24 PoE-capable ports |
|
Switching capacity |
128 Gbps, wire speed and nonblocking |
|
Forwarding rate |
95.23 Mpps (64-byte packets) |
|
Packet buffer |
3 MB, dynamically shared across ports |
|
Layer 3 routing |
RIP v2, OSPF v2 and v3, policy-based routing |
|
Hardware stacking |
Up to 8 units, C1300X Family only |
|
Power input |
Internal universal supply, 100-240V 50-60 Hz |
|
Fan and noise |
1 fan, 44.5 dBA at 25°C |
Product Performance
Key Features
All 24 ports draw from one 385W pool at up to 30W PoE+ each. Twelve full-class ports use 360W and a thirteenth would reach 390W, so the budget rather than the port count caps full-class endpoints.
Active/standby stack control, auto-numbering and hot swap let a member be added or replaced in a C1300X Family stack. Fast stack failover keeps traffic loss minimal when a unit drops out.
OSPF v2 and v3 sit beside RIP v2 and policy-based routing, backed by 7,168 IPv4 routes and 256 IP interfaces. The switch can peer with an upstream router and keep inter-VLAN routing at the branch edge.
The unit idles at 13.6W at 110V and 16.6W at 220V, while worst-case draw with PoE loaded reaches 487W and 474W. Circuit sizing has to allow for the loaded figure even in a lightly used closet.
Time-based PoE switches PoE power on or off on a user-defined schedule to save energy, while persistent PoE provides power during a switch reboot. Attached phones and access points stay powered through a restart.
The four SFP28 slots run 10G toward the core and reach 25G only for stacking. Optics and cables for the uplinks are planned at 10G.
Application Scenarios
In a branch office, the switch sits at the access edge of the floor, powering IP phones and wireless access points while it hands traffic to the site router over its SFP28 uplink slots.
A unified communications rollout can use the voice VLAN and discovery-based port roles to bring IP phones onto the network alongside desktop endpoints.
IP surveillance cameras at a small site take power and data over a single Ethernet cable each, with the 385W budget set against their combined draw.
Product Comparison
|
Parameter |
C1300X-24P-4X | |||
|---|---|---|---|---|
|
Total ports |
24 x Gigabit Ethernet + 4 x 10G |
24 x Gigabit Ethernet + 4 x 10G |
48 x Gigabit Ethernet + 4 x 10G |
24 x 2.5G mGig + 4 x 10G |
|
Uplink ports |
4 x SFP28 (10G uplink, 25G for stacking only) |
4 x SFP+ |
4 x SFP28 (10G uplink, 25G for stacking only) |
4 x SFP28 (10G uplink, 25G for stacking only) |
|
PoE standards |
30W PoE+ on 24 ports |
30W PoE+ on 24 ports |
30W PoE+ on 48 ports |
30W PoE+ on 16 ports, 60W PoE++ on 8 ports |
|
Default PoE budget |
385W |
195W |
740W |
740W |
|
Number of ports that support PoE |
24 |
24 |
48 |
24 |
|
Switching capacity |
128 Gbps |
128 Gbps |
176 Gbps |
200 Gbps |
|
Packet buffer |
3 MB |
1.5 MB |
3 MB |
3 MB |
|
Layer 3 routing protocols |
RIP v2, OSPF v2 and v3 |
RIP v2 |
RIP v2, OSPF v2 and v3 |
RIP v2, OSPF v2 and v3 |
|
Hardware stacking |
C1300X Family, up to 8 units |
C1300 Family 1, up to 8 units |
C1300X Family, up to 8 units |
C1300X Family, up to 8 units |
C1300X-24P-4X and C1300-24P-4X both carry 24 x 10/100/1000 30W PoE+ ports, but C1300-24P-4X has a 195W budget against 385W, 4 x SFP+ instead of SFP28, a 1.5 MB buffer against 3 MB, and no OSPF; it suits a closet that draws under 195W and needs no OSPF. A closet that needs more than 385W or more than 24 powered ports moves to C1300X-48P-4X, with 48 ports on a 740W budget. Endpoints that need 60W or more than 1G call for C1300X-24MU-4X, which runs all 24 ports at 2.5G, with 8 at 60W PoE++, on 740W. Stacking stays inside one family: C1300-24P-4X is in C1300 Family 1, the other three in the C1300X Family.
PoE Power Planning
|
Planning Item |
Value or Check |
|---|---|
|
PoE budget |
385W of power dedicated to PoE, shared by all 24 PoE-capable ports |
|
Per-port PoE class |
30W PoE+ on each of the 24 ports |
|
PoE standards |
The model is listed in Cisco’s 802.3bt (Type 3) PoE++ and 802.3at PoE+ group, but every port is rated 30W PoE+; match each endpoint to that 30W rating |
|
Device count |
Count the PoE endpoints against the 24 PoE-capable ports, then total their rated draw |
|
Endpoint load check |
Add up the rated draw of every phone, access point, and camera and compare the total with 385W |
|
Power supply |
Internal universal supply, 100-240V 50-60 Hz |
Ordering Checklist
- Stack members: C1300X-24P-4X stacks only with C1300X Family PIDs, up to 8 units, over its SFP28 slots (25G for stacking only). Buy SFP-25G-AOC1M, SFP-H25G-CU1M or another supported 25G stack link separately; C1300 Family 1 and Family 2 models cannot join.
- Uplink optics: Add a 10G module from the supported list, such as SFP-10G-SR, SFP-10G-LR, SFP-10G-ER or SFP-10G-AOC1M, to each of the 4 SFP28 slots. The slots ship empty and the uplink runs at 10G on this model.
- Power cord: A power cord matched to the site outlet ships in the package. Select NO-POWER-CORD to leave it out, and the box then has no cord.
Optional Add-ons
|
Model |
Description |
|---|---|
|
CAB-CONSOLE-RJ45 |
Console cable, 6 feet, RJ-45 connector |
|
CAB-CONSOLE-USB-C |
Console cable, USB Type C connector |
|
RCKMNT-1RU-1K= |
1 RU rack-mount kit listed for Catalyst 1300 24-port and 48-port models |
|
10G SFP+ module for multimode fiber, 26 m to 400 m | |
|
10G SFP+ module for single-mode fiber, 10 km | |
|
10G SFP+ module for single-mode fiber, 40 km | |
|
SFP-10G-T-X |
10G SFP+ copper module for UTP CAT6A/CAT7 or better, 30 m |
|
10G copper coax cable, 1 m | |
|
10G copper coax cable, 3 m | |
|
10G copper coax cable, 5 m | |
|
10G active optical cable, 1 m | |
|
10G active optical cable, 3 m | |
|
10G active optical cable, 10 m | |
|
25G passive twinax direct-attach cable, 1 m |
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C1300X-24P-4X | Product type | Fixed managed Layer 3 Gigabit Ethernet PoE+ switch |
| Operating software | Customized Linux OS software | Total ports | 24 x Gigabit Ethernet + 4 x 10G |
| 10/100/1000 PoE+ ports | 24 x 10/100/1000, 30W PoE+ per port | Uplink ports | 4 x SFP28 (10G uplink, 25G available for stacking only) |
| Console port | Cisco standard RJ-45 console port and USB Type C port | USB port | USB Type C port for file and image management as well as console access |
| Bluetooth access | External Bluetooth dongle in the USB port gives laptops and tablets CLI access through a Telnet or SSH client and GUI access through a browser | Buttons | Reset button |
| LEDs | System, Link/Act, PoE, Speed | Switching capacity | 128 Gbps, wire speed and nonblocking |
| Forwarding rate | 95.23 Mpps (64-byte packets) | Packet buffer | 3 MB, aggregate across all ports and dynamically shared |
| Flash | 1 GB SLC | CPU | ARM dual-core at 1.5 GHz |
| DRAM | 2 GB DDR4 | MAC addresses | Up to 32,000 entries |
| VLAN IDs | Up to 4094 VLANs (4078 to 4094 reserved for internal usage) | Spanning tree protocol | MSTP with 16 instances; PVST+ and Rapid PVST+ with 126 instances |
| Port grouping/link aggregation | LACP with up to 8 groups and up to 8 ports per group | Jumbo frames | Up to 9000 bytes; default MTU is 2000 bytes |
| IGMP snooping | IGMP v1, v2, and v3 with 4000 multicast groups and source-specific multicasting | MLD snooping | MLD v1 and v2 snooping |
| Voice VLAN | Voice VLAN with Voice Services Discovery Protocol; Auto Smartports roles from Cisco Discovery Protocol or LLDP-MED | IPv4 routing | Wire-speed routing of IPv4 packets, up to 7,168 IPv4 routes (dynamic and static) and 256 IP interfaces |
| IPv6 routing | Wire-speed routing of IPv6 packets | Layer 3 routing protocols | RIP v2, OSPF v2 and v3 (C1300X SKUs only), and policy-based routing |
| DHCP services | DHCP server, DHCP relay at Layer 3, and UDP relay | ACL entries | Up to 3,072 rules, ingress and egress, time-based ACLs supported |
| Quality of service | 8 hardware queues with strict priority and WRR scheduling | Port mirroring | Up to 8 source ports mirrored to one destination port |
| Hardware stacking | Up to 8 switches in one stack, which manages up to 400 ports as one system; C1300X Family PIDs only | High-speed stack interconnects | SFP28 slots, up to 25G for stacking; ring and chain options |
| Security | 802.1X, web-based authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, port security, storm control, IPv6 First Hop Security | Management | Cisco Business Dashboard embedded probe, Cisco Business mobile app, Network Plug and Play, web UI, SNMP v1/v2c/v3, text view CLI, dual images |
| Firmware upgrade | Web browser upgrade (HTTP/HTTPS), TFTP, and upgrade over SCP running over SSH; dual images for resilient upgrades | Default PoE budget | 385W of power dedicated to PoE across 24 PoE-capable ports |
| PoE standards | Listed in Cisco’s 802.3bt (Type 3) PoE++ and 802.3at PoE+ group; every port is rated 30W PoE+ | Time-based PoE | PoE power on or off on a user-defined schedule |
| Persistent PoE | PoE power stays on while the switch is rebooting | Default power supply | Internal universal supply, 100-240V 50-60 Hz |
| Power consumption (worst case) | 110V=81.3W; 220V=84.6W | Power consumption with PoE (worst case) | 110V=487W; 220V=474W |
| Idle power | 110V=13.6W; 220V=16.6W | Heat dissipation | 1661.71 |
| Energy efficient Ethernet | IEEE 802.3az on all copper Gigabit Ethernet ports | Fan modules | 1 |
| Acoustic noise | 25°C: 44.5 dBA | MTBF at 25°C (hours) | 368,309 |
| Operating temperature | -5°C to 50°C (23°F to 122°F); minimum ambient temperature for cold start is 32°F (0°C) | Storage temperature | -25°C to 70°C (-13°F to 158°F) |
| Operating humidity | 10% to 90% relative, noncondensing | Storage humidity | 10% to 90% relative, noncondensing |
| Dimensions (H x W x D) | 444.3 x 270 x 43.94 mm (17.49 x 10.63 x 1.73 in) | Weight | 3.96 kg (8.73 lb) |
| Mounting | Rack-mountable, 19-inch mounting brackets included | Fiber type | UTP Category 5e or better for 1000BASE-T |
| Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A | Package contents | Switch, power cord (excluded when NO-POWER-CORD is selected), mounting kit, pointer card |
Get More Information
Need pricing, stock, or shipping details for the C1300X-24P-4X ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email [email protected] for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.