C1300-48MGP-4X – 32x1G + 16×2.5G PoE+ Ports – 4x10G SFP+ Uplinks – 740W PoE Budget
Why Layer23-Switch
Stocked, Shipped and Supported by One Team
Ships in 1 Business Day
In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.
LSCare Warranty
3years on enterprise equipment
Free CCIE Support
Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.
Verify Before You Pay
100%factory-sealed
Get label and serial photos before shipment, and check every serial number with Cisco.
C1300-48MGP-4X Description
The C1300-48MGP-4X is a Cisco Catalyst 1300 Series fixed managed Layer 3 multigigabit PoE+ switch for office floors that mix gigabit phones with 2.5G wireless access points. The switch has 32 10/100/1000 and 16 2.5G PoE+ ports, 4 10G SFP+ uplinks, a 740W PoE budget and 224 Gbps of switching capacity. Stacking is limited to C1300 Family 1 models, and OSPF v2 and v3 run only on C1300X models.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C1300-48MGP-4X |
|
Product type |
Fixed managed Layer 3 multigigabit PoE+ switch |
|
10/100/1000 PoE+ ports |
32 x 10/100/1000, 30W PoE+ per port |
|
2.5G PoE+ ports |
16 x 2.5G mGig, 30W PoE+ per port |
|
Uplink ports |
4 x 10G SFP+ |
|
Default PoE budget |
740W, shared across 48 PoE ports |
|
PoE standards |
802.3at PoE+, 802.3af PoE, Cisco pre-standard (legacy) PoE |
|
Switching capacity |
224 Gbps, wire speed and nonblocking |
|
Forwarding rate |
166.65 Mpps (64-byte packets) |
|
Packet buffer |
3 MB, dynamically shared across ports |
|
Hardware stacking |
Up to 8 units, C1300 Family 1 only |
|
Power input |
Internal universal supply, 100-240V 50-60 Hz |
|
Cooling |
1 fan, under 39 dBA at 25°C |
Product Performance
Key Features
Each of the 48 ports is rated 30W PoE+, 32 at 10/100/1000 and 16 at 2.5G, all drawing on one 740W budget. Phones and cameras sit on the gigabit ports and faster endpoints on the 2.5G ports, each powered over one cable.
The four SFP+ slots carry the 10G uplinks, and stack ports are configured from the same slots, after which they carry no user traffic. Up to 8 C1300 Family 1 units join one stack under a single IP address with hardware failover.
The 3 MB buffer is shared dynamically across all ports, and 224 Gbps of nonblocking switching capacity serves the 48 ports and four uplinks at wire speed.
Wire-speed IPv4 and IPv6 routing, RIP v2, policy-based routing, and a built-in DHCP server and relay let the switch route between VLANs and hand out addresses at a small site. Dynamic routing here stops at RIP v2.
With PoE loaded, worst-case draw is 883.4W at 110V and 883W at 220V, against 92.4W and 93.6W without it. Branch circuits, UPS capacity and cooling are sized from the loaded figure, which dissipates 3012.39 BTU/hr.
The Cisco Business Dashboard probe runs on the switch itself, with no separate probe hardware or virtual machine. An external Bluetooth dongle in the USB Type C port gives a laptop or tablet CLI and GUI access.
Application Scenarios
In an office floor closet, the switch powers 2.5G wireless access points from its 16 mGig PoE+ ports while the 32 gigabit ports feed phones and desktops.
A branch closet can run cameras and door readers on the 30W PoE+ ports, all drawing from one 740W budget, with traffic leaving over the 10G SFP+ uplinks.
When a floor adds ports, up to eight C1300 Family 1 units operate as one switch with a single IP address and hardware failover.
Product Comparison
|
Parameter |
C1300-48MGP-4X | |||
|---|---|---|---|---|
|
Total ports |
32 x Gigabit Ethernet + 16 x 2.5G + 4 x 10G |
48 x Gigabit Ethernet + 4 x 10G |
16 x Gigabit Ethernet + 8 x 2.5G + 4 x 10G |
40 x Gigabit Ethernet + 8 x 5G + 4 x SFP28 |
|
Uplink ports |
4 x 10G SFP+ |
4 x 10G SFP+ |
4 x 10G SFP+ |
4 x SFP28 (10G uplink, 25G for stacking only) |
|
PoE power budget |
740W |
740W |
375W |
740W |
|
PoE standards |
802.3at PoE+ (30W) on all 48 ports |
802.3at PoE+ (30W) on all 48 ports |
802.3at PoE+ (30W) on all 24 ports |
802.3bt Type 3 PoE++ (60W) on 8 ports; 802.3at PoE+ (30W) on 40 ports |
|
Switching capacity |
224 Gbps |
176 Gbps |
152 Gbps |
240 Gbps |
|
Packet buffer |
3 MB |
1.5 MB |
1.5 MB |
8 MB |
|
Stacking |
Up to 8 units (C1300 Family 1) |
Up to 8 units (C1300 Family 1) |
Up to 8 units (C1300 Family 1) |
Up to 8 units (C1300X Family) |
|
Routing protocols |
RIP v2 |
RIP v2 |
RIP v2 |
RIP v2, OSPF v2 and v3 |
|
Power consumption with PoE (110V) |
883.4W |
874.52W |
459W |
858.4W |
C1300-48MGP-4X and C1300-48FP-4X both have 48 PoE+ ports on a 740W budget, but C1300-48MGP-4X makes 16 of them 2.5G and doubles the packet buffer to 3 MB, where C1300-48FP-4X runs all 48 at 10/100/1000 with 1.5 MB. Floors with up to 24 powered endpoints, none above 30W and drawing no more than 375W together, can use C1300-24MGP-4X, which keeps 8 2.5G ports and cuts worst-case draw with PoE from 883.4W to 459W at 110V. Endpoints that need 5G links or 60W PoE++ move to C1300X-48NGU-4X, which has 8 such ports, OSPF v2 and v3 and 240 Gbps, but stacks only in the C1300X Family.
PoE Power Planning
|
Planning Item |
Value or Check |
|---|---|
|
PoE power budget |
740W shared across all PoE-capable ports |
|
PoE-capable ports |
48 ports (32 x 10/100/1000 and 16 x 2.5G), each listed at 30W PoE+ |
|
Budget against port ceiling |
48 ports at 30W would total 1440W, so add up the real endpoint draws and keep the sum within 740W; at the full 30W class, 24 ports draw 720W and a 25th would reach 750W |
|
PoE standards |
802.3at PoE+, 802.3af PoE, and Cisco pre-standard (legacy) PoE; match each endpoint to a supported class |
|
Power supply |
Internal universal supply, 100-240V 50-60 Hz |
|
Schedule and reboot behavior |
Time-based PoE turns PoE power on or off on a user-defined schedule, and Persistent PoE keeps power flowing to endpoints while the switch reboots |
Ordering Checklist
- SFP+ modules: Add modules or cables for the 4 x 10G SFP+ uplinks from the Catalyst 1300 list, such as SFP-10G-SR (26 to 400 m multimode), SFP-10G-LR (10 km single-mode), SFP-10G-T-X (30 m over CAT6A/CAT7 or better) or SFP-H10GB-CU3M (3 m copper coax).
- Stack interconnect: Add 10G links for the stack ports of a stacked unit, preferably direct attach cables such as SFP-H10GB-CU1M, and use C1300 Family 1 members only. Stacking needs at least 2 stack ports per unit, and units from different families cannot stack.
- Power cord: Keep the power cord included in the box, or select NO-POWER-CORD, which ships the switch without a cord.
Optional Add-ons
|
Model |
Description |
|---|---|
|
CAB-CONSOLE-RJ45 |
Console cable, 6 feet, RJ-45 connector |
|
CAB-CONSOLE-USB-C |
Console cable, USB Type C connector |
|
CAB-CONSOLE-USB-C= |
Spare-part ordering ID for the USB Type C console cable |
|
RCKMNT-1RU-1K= |
1 RU rack-mount kit for C1000, C1200, and C1300 24-port and 48-port models |
|
10G SFP+ module for multimode fiber, 26 m to 400 m | |
|
10G SFP+ module for single-mode fiber, 10 km | |
|
10G SFP+ module for single-mode fiber, 40 km | |
|
SFP-10G-T-X |
10G SFP+ copper module for UTP CAT6A/CAT7 or better, 30 m |
|
10G copper coax cable, 1 m | |
|
10G copper coax cable, 3 m | |
|
10G copper coax cable, 5 m | |
|
10G active optical cable, 1 m | |
|
10G active optical cable, 3 m | |
|
10G active optical cable, 10 m | |
|
1000 Mbps SFP module for multimode fiber, 550 m | |
|
1000 Mbps SFP module for single-mode fiber, 10 km | |
|
1000 Mbps SFP module for UTP Cat 5e, 100 m |
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C1300-48MGP-4X | Product type | Fixed managed Layer 3 multigigabit PoE+ switch |
| Operating software | Customized Linux OS software | Total ports | 32 Gigabit Ethernet + 16 x 2.5G mGig + 4 x 10G |
| 10/100/1000 PoE+ ports | 32 x 10/100/1000, 30W PoE+ per port | 2.5G PoE+ ports | 16 x 2.5G mGig, 30W PoE+ per port |
| Uplink ports | 4 x 10G SFP+ | Supported port speeds | 10 Gigabit and 1 Gigabit on the SFP+ ports |
| Console port | Cisco standard RJ-45 console port and USB Type C port | USB port | USB Type C port for file and image management and console access |
| Buttons | Reset button | LEDs | System, Link/Act, PoE, Speed |
| Switching capacity | 224 Gbps, wire speed and nonblocking | Forwarding rate | 166.65 Mpps (64-byte packets) |
| Packet buffer | 3 MB, aggregate across all ports and dynamically shared | Flash | 1 GB SLC |
| CPU | ARM dual-core at 1.5 GHz | DRAM | 1 GB DDR4 |
| VLAN IDs | Up to 4094 VLANs (4078 to 4094 reserved for internal usage) | Jumbo frames | Up to 9000 bytes; default MTU is 2000 bytes |
| Layer 3 routing | Wire-speed IPv4 and IPv6 routing; DHCP server, DHCP relay, and UDP relay | Layer 3 routing protocols | RIP v2 and policy-based routing; OSPF v2 and v3 only on C1300X SKUs |
| Spanning tree protocol | MSTP with 16 instances; PVST+ and Rapid PVST+ with 126 instances | Port grouping/link aggregation | LACP with up to 8 groups and up to 8 ports per group |
| IGMP snooping | IGMP v1, v2, and v3 snooping with source-specific multicast | MLD snooping | MLD v1 and v2 |
| Port mirroring | Up to 8 source ports mirrored to one destination port | Quality of service | 8 hardware queues with strict priority and WRR scheduling |
| ACL entries | Drop or rate limit on source and destination MAC, VLAN ID, IPv4 or IPv6 address, protocol, TCP/UDP ports, DSCP/IP precedence, 802.1p priority, and Ethernet type, applied on ingress and egress; time-based ACLs supported | Hardware stacking | Up to 8 switches in one stack, which manages up to 400 ports as one system; C1300 Family 1 PIDs only |
| High-speed stack interconnects | 10 Gigabit Ethernet fiber interfaces, ring and chain options | Security | 802.1X, web-based authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, port security, storm control, IPv6 First Hop Security |
| Voice VLAN | Voice traffic is assigned automatically to a voice-specific VLAN; Voice Services Discovery Protocol supports zero-touch deployment of voice endpoints | Guest VLAN | Guest VLAN and unauthenticated VLAN |
| Private VLAN | Private VLAN with promiscuous, isolated, and community ports; Private VLAN Edge (protected ports) | Management | Cisco Business Dashboard embedded probe, Cisco Business mobile app, Cisco Network Plug and Play, web UI (HTTP/HTTPS), SNMP v1/v2c/v3, text view CLI |
| Firmware upgrade | Web browser (HTTP/HTTPS), TFTP, and SCP over SSH; dual images for resilient upgrades | Bluetooth access | External Bluetooth dongle in the USB port for CLI and GUI access from laptops and tablets |
| Discovery | Bonjour, LLDP with LLDP-MED, Cisco Discovery Protocol | Energy efficiency | IEEE 802.3az Energy Efficient Ethernet on copper Gigabit Ethernet ports, energy detect, cable length detection, port LED disable, time-based port operation |
| Default PoE budget | 740W | PoE-capable ports | 48 |
| PoE standards | 802.3at PoE+, 802.3af PoE, and Cisco pre-standard (legacy) PoE | PoE scheduling | Time-based PoE turns PoE power on or off on a user-defined schedule |
| Persistent PoE | PoE power is provided while the device is rebooting | Default power supply | Internal universal supply, 100-240V 50-60 Hz |
| System power consumption (worst case) | 110V=92.4W; 220V=93.6W | Power consumption with PoE (worst case) | 110V=883.4W; 220V=883W |
| Idle power | 110V=54.6W; 220V=54.9W | Heat dissipation | 3012.39 |
| Fan modules | 1 | Acoustic noise | Under 39 dBA at 25°C |
| MTBF at 25°C (hours) | 310,984 | Operating temperature | -5°C to 50°C (23°F to 122°F); minimum ambient temperature for cold start is 32°F (0°C) |
| Storage temperature | -25°C to 70°C (-13°F to 158°F) | Operating humidity | 10% to 90% relative, noncondensing |
| Storage humidity | 10% to 90% relative, noncondensing | Dimensions (H x W x D) | 444.3 x 350 x 43.94 mm (17.49 x 13.78 x 1.73 in) |
| Weight | 5.83 kg (12.86 lb) | Mounting | Rack-mountable; 19-inch rack brackets are included with 24-port and 48-port models, and RCKMNT-1RU-1K= is the 1 RU rack-mount kit for 24-port and 48-port models |
| Fiber type | UTP Category 5e or better for 1000BASE-T | Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
| Package contents | Switch, power cord (excluded when NO-POWER-CORD is selected), mounting kit, pointer card |
Get More Information
Need pricing, stock, or shipping details for the C1300-48MGP-4X ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email [email protected] for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.