C1300-16XTS – 8x10G Copper Ports – 8x10G SFP+ Ports – 320 Gbps Layer 3 Switch
Why Layer23-Switch
Stocked, Shipped and Supported by One Team
Ships in 1 Business Day
In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.
LSCare Warranty
3years on enterprise equipment
Free CCIE Support
Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.
Verify Before You Pay
100%factory-sealed
Get label and serial photos before shipment, and check every serial number with Cisco.
C1300-16XTS Description
The C1300-16XTS is a Cisco Catalyst 1300 Series fixed managed Layer 3 10 Gigabit Ethernet switch for small offices that run 10G over both copper and fiber. The switch has 8 10G copper ports and 8 10G SFP+ ports that are separate rather than combo pairs, 320 Gbps of switching capacity and no PoE output. Hardware stacking of up to 8 units accepts only C1300 Family 2 members, and OSPF routing is limited to C1300X models.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C1300-16XTS |
|
Product type |
Fixed managed Layer 3 10 Gigabit Ethernet switch |
|
10G copper ports |
8 x 10G copper |
|
10G SFP+ ports |
8 x 10G SFP+, separate from the copper ports |
|
Management port |
1 x GE out-of-band management |
|
Switching capacity |
320 Gbps, wire speed and nonblocking |
|
Forwarding rate |
238.1 Mpps (64-byte packets) |
|
Packet buffer |
3 MB, dynamically shared across ports |
|
PoE power budget |
Not a PoE switch (data only) |
|
Hardware stacking |
Up to 8 units, C1300 Family 2 only |
|
Power input |
Internal universal supply, 100-240V 50-60 Hz |
|
Power consumption (worst case) |
33.36W at 110V; 35.2W at 220V |
|
Dimensions (H x W x D) |
268 x 300 x 43.94 mm |
Product Performance
Key Features
The 8 copper ports and 8 SFP+ ports are separate ports rather than combo pairs, so all 16 data links can be active together. A closet can land 10G copper hosts and fiber, copper coax or active optical runs without giving up one media for the other.
Up to 8 C1300 Family 2 units are managed as one system behind one IP address, with hardware failover covering a failed member. LAG, QoS and VLANs span the members.
802.1X, web-based authentication and DHCP snooping control admission, IP Source Guard and Dynamic ARP Inspection block spoofed traffic, and up to 2048 ACL rules carry segment policy such as separating guest and staff VLANs.
Worst-case draw is 33.36W at 110V and 35.2W at 220V, with 195.86 BTU/hr of heat and 16.4W at idle on 110V. UPS runtime and room cooling for a 16-port 10G unit can be sized from those figures.
The 268 x 300 x 43.94 mm chassis weighs 2.68 kg, runs one fan at 28.7 dBA and operates from -5° to 50°C, which suits installation outside the wiring closet.
The Cisco Business Dashboard probe is embedded, so no probe appliance or virtual machine is needed onsite. A Bluetooth dongle in the USB port opens CLI and GUI access from a laptop or tablet.
Application Scenarios
The switch serves as the single 10G edge unit of a small office: servers and workstations connect to the copper ports, and the SFP+ ports take fiber, copper coax or active optical runs toward the rest of the network.
On a small server shelf, the switch sits beside a storage array and a few hosts, and iSCSI traffic optimization keeps storage flows ahead of other traffic between them.
In a branch office, the switch aggregates 10G uplinks from PoE access switches elsewhere in the building and carries voice and data on one network with voice VLAN assignment and hardware queues for QoS.
Product Comparison
|
Parameter |
C1300-16XTS | |||
|---|---|---|---|---|
|
Total ports |
8 x 10G copper + 8 x 10G SFP+ + 1 x GE OOB management |
10 x 10G SFP+ + 2 x 10G copper/SFP+ combo + 1 x GE OOB management |
12 x 10G copper + 2 x 10G SFP+ + 1 x GE OOB management |
12 x 10G copper + 12 x 10G SFP+ + 1 x GE OOB management |
|
Switching capacity |
320 Gbps |
240 Gbps |
280 Gbps |
480 Gbps |
|
Packet buffer |
3 MB |
3 MB |
3 MB |
8 MB |
|
Power dedicated to PoE (PoE power budget) |
No PoE output |
No PoE output |
No PoE output |
No PoE output |
|
Hardware stacking |
Up to 8 units, C1300 Family 2 |
Up to 8 units, C1300 Family 2 |
Up to 8 units, C1300 Family 2 |
Up to 8 units, C1300 Family 2 |
|
Power consumption (worst case) |
110V=33.36W; 220V=35.2W |
110V=24.3W; 220V=26.1W |
110V=50.3W; 220V=52W |
110V=88.2W; 220V=86.7W |
|
Dimensions (H x W x D) |
268 x 300 x 43.94 mm |
268 x 300 x 43.94 mm |
268 x 300 x 43.94 mm |
444.3 x 273 x 43.94 mm |
|
Mounting |
Rack-mountable; 19-inch brackets not included |
Rack-mountable; 19-inch brackets not included |
Rack-mountable; 19-inch brackets not included |
Rack-mountable; 19-inch brackets included |
C1300-16XTS has 8 copper and 8 SFP+ ports at 320 Gbps with a 3 MB buffer in a 268 mm chassis, while C1300-24XTS has 12 copper and 12 SFP+ ports at 480 Gbps with an 8 MB buffer in a 444.3 mm chassis that includes 19-inch brackets. A plan with more than 8 links on either media, or one that needs 8 MB, moves to C1300-24XTS. More than 8 copper links with 2 fiber links or fewer fits C1300-12XT-2X at 280 Gbps, and up to 12 fiber links with 2 copper links fits C1300-12XS at 240 Gbps. PoE and stack family do not separate the four, since all are data-only C1300 Family 2 models.
Ordering Checklist
- SFP+ modules and cables: Match the 8 SFP+ ports to SFP-10G-SR, SFP-10G-LR, SFP-10G-ER or SFP-10G-T-X modules, or to SFP-H10GB-CU1M or SFP-10G-AOC1M cables. A module outside the supported list leaves a 10G link unusable.
- Stack links: Choose at least 2 SFP+ ports per unit as stack ports in a C1300 Family 2 stack, and add SFP-H10GB-CU1M, SFP-H10GB-CU3M or SFP-H10GB-CU5M cables or 10G optics; SFP-10G-T-X RJ45 modules are not recommended for stacking. A link without a cable or optic stays down.
- Rack bracket kit: Add RCKMNT-CMPCT-1K=, the 19-inch bracket for 8-, 12- and 16-port models; only 24- and 48-port models include 19-inch brackets.
- Power cord: Keep the included power cord or select NO-POWER-CORD, which ships the order without a cord.
Optional Add-ons
|
Model |
Description |
|---|---|
|
CAB-CONSOLE-RJ45 |
Console cable, 6 feet, RJ-45 connector |
|
CAB-CONSOLE-USB-C |
Console cable, USB-C type |
|
RCKMNT-CMPCT-1K= |
19-inch rack-mount bracket for C1000, C1200, and C1300 switches in the 8-, 12-, and 16-port classes |
|
10 Gigabit Ethernet SFP+ module for multimode fiber, 26 m to 400 m | |
|
10 Gigabit Ethernet SFP+ module for single-mode fiber, 10 km | |
|
10 Gigabit Ethernet SFP+ module for single-mode fiber, 40 km | |
|
SFP-10G-T-X |
10 Gigabit Ethernet SFP+ module for UTP CAT6A/CAT7 or better, 30 m |
|
10G copper coax cable, 1 m | |
|
10G copper coax cable, 3 m | |
|
10G copper coax cable, 5 m | |
|
10 Gigabit Ethernet active optical cable assembly, 1 m | |
|
10 Gigabit Ethernet active optical cable assembly, 3 m | |
|
10 Gigabit Ethernet active optical cable assembly, 10 m |
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C1300-16XTS | Product type | Fixed managed Layer 3 10 Gigabit Ethernet switch |
| Operating software | Customized Linux OS software | Total ports | 8 x 10G copper + 8 x 10G SFP+ + 1 x GE OOB management |
| 10G copper ports | 8 x 10G copper | 10G SFP+ ports | 8 x 10G SFP+, separate from the copper ports (no combo pairing) |
| Supported port speeds | 10 Gigabit and 1 Gigabit on the copper and SFP+ ports | Management port | 1 x GE out-of-band management |
| Console port | Cisco standard RJ-45 console port and USB Type C port | USB port | USB Type C port for file and image management and console access |
| Buttons | Reset button | Port LED control | Port LEDs can be turned off manually to save energy |
| Switching capacity | 320 Gbps, wire speed and nonblocking | Forwarding rate | 238.1 Mpps (64-byte packets) |
| Packet buffer | 3 MB, aggregate across all ports and dynamically shared | Flash | 1 GB SLC |
| CPU | ARM dual-core at 1.5 GHz | DRAM | 1 GB DDR4 |
| MAC addresses | Up to 32,000 entries | VLAN IDs | Up to 4094 VLANs (4078 to 4094 reserved for internal usage) |
| IP routing | Wire-speed IPv4 and IPv6 routing | IPv4 routing scale | Up to 7,168 dynamic and static routes and 256 IP interfaces |
| Layer 3 routing protocols | RIP v2 and policy-based routing; OSPF v2 and v3 only on C1300X SKUs | DHCP services | DHCP server, DHCP relay, and UDP relay |
| ACL entries | Up to 2,048 rules, ingress and egress, time-based ACLs supported | IGMP snooping | IGMP v1, v2, and v3 with 4000 multicast groups |
| MLD snooping | MLD v1 and v2 | Spanning tree protocol | MSTP with 16 instances; PVST+ and Rapid PVST+ with 126 instances |
| Port grouping/link aggregation | LACP with up to 8 groups and up to 8 ports per group | Port mirroring | Up to 8 source ports to one destination port |
| Jumbo frames | Up to 9000 bytes; default MTU is 2000 bytes | Quality of service | 8 hardware queues with strict priority and WRR scheduling; 802.1p, DSCP, and IP precedence classification; ingress policing and egress shaping |
| ISCSI traffic optimization | Priority for iSCSI traffic over other traffic | Hardware stacking | Up to 8 switches in one stack; C1300 Family 2 PIDs only |
| High-speed stack interconnects | 10 Gigabit Ethernet fiber interfaces, ring and chain options | Security | 802.1X (authenticator and supplicant), web-based authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, port security, storm control, IPv6 First Hop Security, RADIUS and TACACS+ |
| Management | Cisco Business Dashboard embedded probe, Cisco Business mobile app, Cisco Network Plug and Play, web UI, SNMP v1/v2c/v3, text view CLI, dual images, external Bluetooth dongle in the USB port for CLI and GUI access | PoE power budget | Not a PoE switch (data only) |
| Default power supply | Internal universal supply, 100-240V 50-60 Hz | Power consumption (worst case) | 110V=33.36W; 220V=35.2W |
| Idle power | 110V=16.4W; 220V=18.3W | Heat dissipation | 195.86 |
| Fan modules | 1 | Acoustic noise | 25°C: 28.7 dBA |
| MTBF at 25°C | 1,201,527 | Operating temperature | -5°C to 50°C (23°F to 122°F); minimum ambient temperature for cold start is 32°F (0°C) |
| Storage temperature | -25°C to 70°C (-13°F to 158°F) | Operating humidity | 10% to 90% relative, noncondensing |
| Storage humidity | 10% to 90% relative, noncondensing | Dimensions (H x W x D) | 268 x 300 x 43.94 mm |
| Weight | 2.68 kg (5.91 lb) | Mounting | Rack-mountable; 19-inch mounting brackets ship only with 24-port and 48-port models |
| Rack-mount bracket kit | RCKMNT-CMPCT-1K= (19-inch bracket for 8-, 12-, and 16-port models) | Fiber type | Category 6a or better for the 10G copper ports; Category 5e or better for other copper ports |
| Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A | Package contents | Switch, power cord (excluded when NO-POWER-CORD is selected), mounting kit, pointer card |
Get More Information
Need pricing, stock, or shipping details for the C1300-16XTS ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email [email protected] for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.