C1300-24XTS – 12x10G Copper Ports – 12x10G SFP+ Ports – Managed Layer 3 Data Switch
Why Layer23-Switch
Stocked, Shipped and Supported by One Team
Ships in 1 Business Day
In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.
LSCare Warranty
3years on enterprise equipment
Free CCIE Support
Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.
Verify Before You Pay
100%factory-sealed
Get label and serial photos before shipment, and check every serial number with Cisco.
C1300-24XTS Description
The C1300-24XTS is a Cisco Catalyst 1300 Series fixed managed Layer 3 switch for branch and small-business sites that need 10G copper and 10G fiber links on one chassis. The switch has 12 10G copper ports and 12 10G SFP+ ports as separate non-combo ports, with 480 Gbps of nonblocking switching capacity, a 357.12 Mpps forwarding rate and no PoE. Stacking is limited to C1300 Family 2 models, up to 8 units.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C1300-24XTS |
|
Product type |
Fixed managed Layer 3 10 Gigabit Ethernet switch |
|
10G copper ports |
12 x 10G copper |
|
10G SFP+ ports |
12 x 10G SFP+ |
|
Combo port sharing |
None; all 24 data ports are independent, with no combo pairing |
|
Management port |
1 x GE out-of-band management |
|
Switching capacity |
480 Gbps, wire speed and nonblocking |
|
Forwarding rate |
357.12 Mpps (64-byte packets) |
|
Packet buffer |
8 MB, dynamically shared across ports |
|
Default PoE budget |
None; not a PoE switch (data only) |
|
Hardware stacking |
Up to 8 units, C1300 Family 2 only |
|
Power input |
Internal universal supply, 100-240V 50-60 Hz |
|
Acoustic noise |
<39 dBA at 25°C |
Product Performance
Key Features
The 12 copper ports and 12 SFP+ ports are independent, so all 24 data links can be cabled at once with no combo pair giving up one side.
Up to eight C1300 Family 2 units run as one system with a single IP address, hardware failover and link aggregation across members, in ring or chain topologies with hot swap of units.
Worst-case draw is 88.2W at 110V, dissipating 300.76 BTU/hr, and the fan is rated under 39 dBA at 25°C. The chassis is 273 mm deep, which matters for shallow cabinets.
Application Scenarios
At a branch site, the switch terminates 10G copper links from local servers and workstations and SFP+ fiber links from floor switches on one unit.
In a small server or storage rack, the switch links 10G copper hosts directly and SFP+ hosts over twinax or active optical cables, with iSCSI traffic optimization giving storage traffic priority.
A branch office that carries corporate, voice and guest VLANs can use the switch as its routing point, with inter-VLAN routing, DHCP services and Voice VLAN handling on the switch.
Product Comparison
|
Parameter |
C1300-24XTS | |||
|---|---|---|---|---|
|
Total ports |
12 x 10G copper + 12 x 10G SFP+ + 1 x GE OOB management |
20 x 10G SFP+ + 4 x 10G copper/SFP+ combo + 1 x GE OOB management |
20 x 10G copper + 4 x 10G copper/SFP+ combo + 1 x GE OOB management |
8 x 10G copper + 8 x 10G SFP+ + 1 x GE OOB management |
|
Default PoE budget |
None (data only) |
None (data only) |
None (data only) |
None (data only) |
|
Switching capacity |
480 Gbps |
480 Gbps |
480 Gbps |
320 Gbps |
|
Forwarding rate |
357.12 Mpps |
357.14 Mpps |
357.14 Mpps |
238.1 Mpps |
|
Packet buffer |
8 MB |
8 MB |
8 MB |
3 MB |
|
Hardware stacking |
C1300 Family 2 |
C1300 Family 2 |
C1300 Family 2 |
C1300 Family 2 |
|
System power consumption (110V) |
88.2W |
49.46W |
87.3W |
33.36W |
|
Unit dimensions |
444.3 x 273 x 43.94 mm |
444.3 x 286 x 43.94 mm |
444.3 x 286 x 43.94 mm |
268 x 300 x 43.94 mm |
C1300-24XTS splits its 24 data ports into 12 10G copper plus 12 10G SFP+ with no combo pairs, where C1300-24XT has 20 copper ports plus 4 copper/SFP+ combos. A rack that is mostly fiber or twinax with few copper drops fits C1300-24XS, which draws 49.46W worst case at 110V against 88.2W for C1300-24XTS, and copper-heavy plans fit C1300-24XT. C1300-16XTS keeps the dedicated 8 copper plus 8 SFP+ layout at 320 Gbps, a 3 MB buffer and a 268 mm wide chassis, so sites that stay within eight links per media can drop to it. All four are data-only and stack within C1300 Family 2.
Ordering Checklist
- Stack members: Stack only with C1300 Family 2 models: C1300-12XT-2X, C1300-12XS, C1300-16XTS, C1300-24XS, C1300-24XT or C1300-24XTS, up to 8 units. Cisco does not support stacking across families, so a member from another family cannot join.
- Stack links: Add DAC cables (preferred) or 10G optics for the SFP+ ports that become stack ports, at least 2 per unit; avoid RJ45 SFPs such as SFP-10G-T-X. The switch has no stack ports by default, and a port configured for stacking no longer carries user traffic.
- SFP+ optics and cables: Add modules or cables from the Catalyst 1300 supported list for the 12 SFP+ slots, such as SFP-10G-SR, SFP-10G-LR, SFP-H10GB-CU1M or SFP-10G-AOC1M. The switch ships without optics, so each SFP+ link needs its own module or cable on the order.
- Power cord: Keep the included power cord or select NO-POWER-CORD. A switch ordered with NO-POWER-CORD arrives without a cord.
Optional Add-ons
|
Model |
Description |
|---|---|
|
CAB-CONSOLE-RJ45 |
Console cable, 6 feet, RJ-45 connector |
|
CAB-CONSOLE-USB-C |
Console cable, USB-C type |
|
RCKMNT-1RU-1K= |
1 RU rack-mount kit for Catalyst 1300 24-port and 48-port models |
|
10G SFP+ module for multimode fiber, 26 m to 400 m | |
|
10G SFP+ module for single-mode fiber, 10 km | |
|
10G SFP+ module for single-mode fiber, 40 km | |
|
SFP-10G-T-X |
10G SFP+ copper module for UTP CAT6A/CAT7 or better, 30 m |
|
10G copper coax cable, 1 m | |
|
10G copper coax cable, 3 m | |
|
10G copper coax cable, 5 m | |
|
10G active optical cable, 1 m | |
|
10G active optical cable, 3 m | |
|
10G active optical cable, 10 m | |
|
1G SFP module for multimode fiber, 550 m | |
|
1G SFP module for single-mode fiber, 10 km |
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C1300-24XTS | Product type | Fixed managed Layer 3 10 Gigabit Ethernet switch |
| Operating software | Customized Linux OS software | Total ports | 12 x 10G copper + 12 x 10G SFP+ + 1 x GE OOB management |
| 10G copper ports | 12 x 10G copper | 10G SFP+ ports | 12 x 10G SFP+ |
| Combo ports | None; copper and SFP+ ports are separate and can all be active at once | Supported port speeds | 10 Gigabit and 1 Gigabit on the copper and SFP+ ports |
| Management port | 1 x GE out-of-band management | Console port | Cisco standard RJ-45 console port and USB Type C port |
| USB port | USB Type C port for file and image management and console access | Bluetooth access | External Bluetooth dongle on the USB port for CLI and GUI access |
| Buttons | Reset button | Switching capacity | 480 Gbps, wire speed and nonblocking |
| Forwarding rate | 357.12 Mpps (64-byte packets) | Packet buffer | 8 MB, aggregate across all ports and dynamically shared |
| Flash | 1 GB SLC | CPU | ARM dual-core at 1.5 GHz |
| DRAM | 1 GB DDR4 | MAC addresses | Up to 32,000 entries |
| VLAN IDs | Up to 4094 VLANs (4078 to 4094 reserved for internal usage) | IPv4 routing scale | Up to 7,168 dynamic and static routes and 256 IP interfaces |
| Layer 3 routing protocols | RIP v2 and policy-based routing; OSPF v2 and v3 only on C1300X SKUs | DHCP services | DHCP server, DHCP relay, and UDP relay at Layer 3 |
| ACL entries | Up to 2,048 rules, ingress and egress, time-based ACLs supported | IGMP snooping | IGMP v1, v2, and v3 with 4000 multicast groups |
| MLD snooping | MLD v1 and v2 | Spanning tree protocol | MSTP with 16 instances; PVST+ and Rapid PVST+ with 126 instances |
| Port grouping/link aggregation | LACP with up to 8 groups and up to 8 ports per group | Port mirroring | Up to 8 source ports to 1 destination port |
| Jumbo frames | Up to 9000 bytes; default MTU is 2000 bytes | Quality of service | 8 hardware queues with strict priority and WRR scheduling; 802.1p, DSCP, and IP precedence classification; ingress policing and egress shaping |
| ISCSI traffic optimization | iSCSI traffic is given priority over other traffic | Hardware stacking | Up to 8 switches in one stack; C1300 Family 2 PIDs only |
| High-speed stack interconnects | 10 Gigabit Ethernet fiber interfaces; ring and chain options | Stack management features | Single IP address, hardware failover, hot swap of units, active/standby control, auto-numbering, LAG across stack units |
| Security | 802.1X authenticator and supplicant, web-based authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, port security, storm control, IPv6 First Hop Security, RADIUS and TACACS+ | Management | Cisco Business Dashboard embedded probe, Cisco Business mobile app, Network Plug and Play with PnP Connect, web UI over HTTP/HTTPS, SNMP v1/v2c/v3, text view CLI with privilege levels 1, 7, and 15 |
| Firmware upgrade | Dual images; upgrade over SCP, TFTP, or the web UI | Default PoE budget | None; not a PoE switch (data only) |
| Default power supply | Internal universal supply, 100-240V 50-60 Hz | Power consumption (worst case) | 110V=88.2W; 220V=86.7W |
| Idle power | 110V=22.3W; 220V=22.8W | Heat dissipation | 300.76 |
| Fan modules | 1 | Acoustic noise | 25°C: <39 dBA |
| MTBF at 25°C (hours) | 427,188 | Operating temperature | -5°C to 50°C (23°F to 122°F); minimum ambient temperature for cold start is 32°F (0°C) |
| Storage temperature | -25°C to 70°C (-13°F to 158°F) | Operating humidity | 10% to 90% relative, noncondensing |
| Storage humidity | 10% to 90% relative, noncondensing | Dimensions (H x W x D) | 444.3 x 273 x 43.94 mm |
| Weight | 4.2 kg (9.25 lb) | Mounting | Rack-mountable, 19-inch mounting brackets included |
| Fiber type | Category 6a or better for the 10G copper ports; Category 5e or better for other copper ports | Standards | IEEE 802.3an 10GBASE-T, IEEE 802.3ae 10 Gbps Ethernet over fiber, IEEE 802.3ab 1000BASE-T, IEEE 802.3ad LACP, IEEE 802.3az Energy Efficient Ethernet |
| Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A | Package contents | Switch, power cord (excluded when NO-POWER-CORD is selected), mounting kit, pointer card |
Get More Information
Need pricing, stock, or shipping details for the C1300-24XTS ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email [email protected] for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.