C1300-24XS – 20x10G SFP+ Ports – 4x10G Copper/SFP+ Combo – Stackable Catalyst 1300
Why Layer23-Switch
Stocked, Shipped and Supported by One Team
Ships in 1 Business Day
In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.
LSCare Warranty
3years on enterprise equipment
Free CCIE Support
Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.
Verify Before You Pay
100%factory-sealed
Get label and serial photos before shipment, and check every serial number with Cisco.
C1300-24XS Description
The C1300-24XS is a Cisco Catalyst 1300 Series fixed managed Layer 3 switch for 10G fiber aggregation in branch offices and small business networks. The switch has 20 SFP+ ports and four copper/SFP+ combo ports, with 480 Gbps of nonblocking switching capacity, a 357.14 Mpps forwarding rate and no PoE. Stacking is limited to C1300 Family 2 models, up to 8 units, and OSPF routing runs only on C1300X models.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C1300-24XS |
|
Product type |
Fixed managed Layer 3 10 Gigabit Ethernet switch |
|
10G SFP+ ports |
20 x 10G SFP+ |
|
Combo ports |
4 x 10G copper/SFP+ combo, one port of each pair active at a time |
|
Management port |
1 x GE out-of-band management |
|
Switching capacity |
480 Gbps, wire speed and nonblocking |
|
Forwarding rate |
357.14 Mpps (64-byte packets) |
|
Packet buffer |
8 MB, dynamically shared across ports |
|
Default PoE budget |
None; not a PoE switch (data only) |
|
Hardware stacking |
Up to 8 units, C1300 Family 2 only |
|
Power input |
Internal universal supply, 100-240V 50-60 Hz |
|
Fan and noise |
1 fan, 27.6 dBA at 25°C |
|
Weight |
4.15 kg (9.15 lb) |
Product Performance
Key Features
Twenty fixed SFP+ ports carry fiber or twinax links without adapters. The four combo ports add copper handoffs, with either the copper port or the SFP+ slot of each pair active at a time.
Up to eight C1300 Family 2 units run as one system with hardware failover and cross-stack link aggregation, so capacity grows one unit at a time.
Worst-case draw is 49.46W at 110V, dissipating 220.77 BTU/hr, and the single fan is rated at 27.6 dBA at 25°C. These figures set cooling and UPS load for a small equipment room.
Application Scenarios
In a branch office or small campus building, the switch aggregates 10G fiber uplinks from floor access switches, with SFP+ ports for SR or LR optics and combo ports for a few copper handoffs.
At the top of a small server or storage rack, the switch links hosts over 10G twinax or active optical cables, and iSCSI traffic optimization gives storage traffic priority.
A growing site can stack up to eight C1300 Family 2 units into one core with a single IP address, with inter-VLAN routing and DHCP services running on the stack.
Product Comparison
|
Parameter |
C1300-24XS | |||
|---|---|---|---|---|
|
Total ports |
20 x 10G SFP+ + 4 x 10G copper/SFP+ combo + 1 x GE OOB management |
20 x 10G copper + 4 x 10G copper/SFP+ combo + 1 x GE OOB management |
12 x 10G copper + 12 x 10G SFP+ + 1 x GE OOB management |
10 x 10G SFP+ + 2 x 10G copper/SFP+ combo + 1 x GE OOB management |
|
Default PoE budget |
None (data only) |
None (data only) |
None (data only) |
None (data only) |
|
Switching capacity |
480 Gbps |
480 Gbps |
480 Gbps |
240 Gbps |
|
Forwarding rate |
357.14 Mpps |
357.14 Mpps |
357.12 Mpps |
178.57 Mpps |
|
Packet buffer |
8 MB |
8 MB |
8 MB |
3 MB |
|
Hardware stacking |
C1300 Family 2 |
C1300 Family 2 |
C1300 Family 2 |
C1300 Family 2 |
|
System power consumption (110V) |
49.46W |
87.3W |
88.2W |
24.3W |
|
Fan modules |
1 |
1 |
1 |
1 |
C1300-24XS differs from C1300-24XT in port media: it dedicates 20 ports to 10G SFP+ where the other dedicates 20 to 10G copper, and the SFP+ model draws 49.46W worst case at 110V against 87.3W. Racks with copper-cabled 10G hosts need C1300-24XT, while fiber and twinax links stay on C1300-24XS. A plan that needs 12 copper and 12 SFP+ ports active together calls for C1300-24XTS, because C1300-24XS has copper only on its 4 combo ports. Sites with 12 links or fewer, at most 2 of them copper, can use C1300-12XS at 240 Gbps and a 3 MB buffer instead of 480 Gbps and 8 MB. All four are data-only and stack within C1300 Family 2.
Ordering Checklist
- Stack members: Stack only with C1300 Family 2 models: C1300-12XT-2X, C1300-12XS, C1300-16XTS, C1300-24XS, C1300-24XT or C1300-24XTS, up to 8 units. Cisco does not support stacking across families, so a member from another family cannot join.
- Stack links: Add DAC cables (preferred) or 10G optics for the SFP+ ports that become stack ports, at least 2 per unit; avoid RJ45 SFPs such as SFP-10G-T-X. The switch has no stack ports by default, and a port configured for stacking no longer carries user traffic.
- SFP+ optics and cables: Add modules or cables from the Catalyst 1300 supported list for the 20 SFP+ slots plus the 4 combo SFP+ slots in use, such as SFP-10G-SR, SFP-10G-LR, SFP-H10GB-CU1M or SFP-10G-AOC1M. The switch ships without optics, so each SFP+ link needs its own module or cable on the order.
- Power cord: Keep the included power cord or select NO-POWER-CORD. A switch ordered with NO-POWER-CORD arrives without a cord.
Optional Add-ons
|
Model |
Description |
|---|---|
|
CAB-CONSOLE-RJ45 |
Console cable, 6 feet, RJ-45 connector |
|
CAB-CONSOLE-USB-C |
Console cable, USB Type C connector |
|
RCKMNT-1RU-1K= |
1 RU rack-mount kit for Catalyst 1300 24-port and 48-port models |
|
10G SFP+ module for multimode fiber, 26 m to 400 m | |
|
10G SFP+ module for single-mode fiber, 10 km | |
|
10G SFP+ module for single-mode fiber, 40 km | |
|
SFP-10G-T-X |
10G SFP+ copper module for UTP CAT6A/CAT7 or better, 30 m |
|
10G copper coax cable, 1 m | |
|
10G copper coax cable, 3 m | |
|
10G copper coax cable, 5 m | |
|
10G active optical cable, 1 m | |
|
10G active optical cable, 3 m | |
|
10G active optical cable, 10 m |
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C1300-24XS | Product type | Fixed managed Layer 3 10 Gigabit Ethernet switch |
| Operating software | Customized Linux OS software | Total ports | 20 x 10G SFP+ + 4 x 10G copper/SFP+ combo + 1 x GE OOB management |
| 10G SFP+ ports | 20 x 10G SFP+ | Combo ports | 4 x 10G copper/SFP+ combo, one port of each pair active at a time |
| Supported port speeds | 10 Gigabit and 1 Gigabit on the copper and SFP+ ports | Management port | 1 x GE out-of-band management |
| Console port | Cisco standard RJ-45 console port and USB Type C port | USB port | USB Type C port for file and image management and console access |
| Buttons | Reset button | Port LED control | Port LEDs can be turned off manually to save energy |
| Switching capacity | 480 Gbps, wire speed and nonblocking | Forwarding rate | 357.14 Mpps (64-byte packets) |
| Packet buffer | 8 MB, aggregate across all ports and dynamically shared | Flash | 1 GB SLC |
| CPU | ARM dual-core at 1.5 GHz | DRAM | 1 GB DDR4 |
| MAC addresses | Up to 32,000 entries | VLAN IDs | Up to 4094 VLANs (4078 to 4094 reserved for internal usage) |
| IPv4 routing scale | Up to 7,168 dynamic and static routes and 256 IP interfaces | Layer 3 routing protocols | RIP v2 and policy-based routing; OSPF v2 and v3 only on C1300X SKUs |
| ACL entries | Up to 2,048 rules, ingress and egress, time-based ACLs supported | IGMP snooping | IGMP v1, v2, and v3 with 4000 multicast groups |
| Spanning tree protocol | MSTP with 16 instances; PVST+ and Rapid PVST+ with 126 instances | Port grouping/link aggregation | LACP with up to 8 groups and up to 8 ports per group |
| Jumbo frames | Up to 9000 bytes; default MTU is 2000 bytes | Quality of service | 8 hardware queues with strict priority and WRR scheduling |
| Hardware stacking | Up to 8 switches in one stack; C1300 Family 2 PIDs only | High-speed stack interconnects | 10 Gigabit Ethernet fiber interfaces, ring and chain options |
| Security | 802.1X, web-based authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, port security, storm control, IPv6 First Hop Security | Management | Cisco Business Dashboard embedded probe, Cisco Business mobile app, Network Plug and Play, web UI, SNMP v1/v2c/v3, text view CLI, dual images |
| Default PoE budget | None; not a PoE switch (data only) | Default power supply | Internal universal supply, 100-240V 50-60 Hz |
| Power consumption (worst case) | 110V=49.46W; 220V=49.02W | Idle power | 110V=21.5W; 220V=21.3W |
| Heat dissipation | 220.77 | Fan modules | 1 |
| Acoustic noise | 25°C: 27.6 dBA | MTBF at 25°C (hours) | 993,232 |
| Operating temperature | -5°C to 50°C (23°F to 122°F); minimum ambient temperature for cold start is 32°F (0°C) | Storage temperature | -25°C to 70°C (-13°F to 158°F) |
| Operating humidity | 10% to 90% relative, noncondensing | Storage humidity | 10% to 90% relative, noncondensing |
| Dimensions (H x W x D) | 444.3 x 286 x 43.94 mm (17.49 x 11.26 x 1.73 in) | Weight | 4.15 kg (9.15 lb) |
| Mounting | Rack-mountable, 19-inch mounting brackets included | Fiber type | Category 6a or better for the 10G copper ports on the 4 combo pairs; Category 5e or better for other copper ports |
| Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A | Package contents | Switch, power cord (excluded when NO-POWER-CORD is selected), mounting kit, pointer card |
Get More Information
Need pricing, stock, or shipping details for the C1300-24XS ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email [email protected] for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.