C1300X-10NU-2X – 10x5G PoE++ Ports – 2x10G SFP28 Uplinks – 385W PoE Budget
Why Layer23-Switch
Stocked, Shipped and Supported by One Team
Ships in 1 Business Day
In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.
LSCare Warranty
3years on enterprise equipment
Free CCIE Support
Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.
Verify Before You Pay
100%factory-sealed
Get label and serial photos before shipment, and check every serial number with Cisco.
C1300X-10NU-2X Description
The C1300X-10NU-2X is a Cisco Catalyst 1300X Series fixed managed Layer 3 5G multigigabit PoE++ switch for branch offices that power Wi-Fi 7 access points. The switch has ten 5G ports at 60W PoE++ each on a shared 385W budget, two SFP28 uplinks running at 10G, 140 Gbps of switching capacity and one 38.9 dBA fan. Stacking of up to eight units works only within the C1300X Family, so the switch cannot join a C1300 Family 1 or Family 2 stack.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C1300X-10NU-2X |
|
Product type |
Fixed managed Layer 3 5G multigigabit PoE++ switch |
|
PoE++ ports |
10 x 5G, 60W PoE++ per port |
|
Uplink ports |
2 x SFP28 (10G uplink, 25G available for stacking only) |
|
Default PoE budget |
385W across 10 PoE-capable ports |
|
Switching capacity |
140 Gbps, wire speed and nonblocking |
|
Forwarding rate |
104.16 Mpps (64-byte packets) |
|
Packet buffer |
3 MB, dynamically shared across ports |
|
Layer 3 routing |
RIP v2, OSPF v2 and v3, policy-based routing |
|
Hardware stacking |
Up to 8 units, C1300X Family only |
|
Power input |
Internal universal supply, 100-240V 50-60 Hz |
|
Cooling |
1 fan, 38.9 dBA at 25°C |
|
Dimensions (H x W x D) |
268 x 308 x 43.94 mm |
Product Performance
Key Features
Each of the 10 ports is rated 60W PoE++, but the pool is 385W: six endpoints at the full 60W use 360W, and a seventh would bring the total to 420W. The budget, not the port count, caps how many 60W endpoints one unit can power.
The two SFP28 slots run 10G uplinks and reach 25G only for stacking. Ten 5G ports total 50G against 20G of uplink, a 2.5:1 ratio worth weighing when many endpoints transmit at once.
Dynamic routing includes OSPF v2 and v3, which run on C1300X models only, beside RIP v2 and policy-based routing. With room for 7,168 IPv4 routes and 256 IP interfaces, the switch can exchange routes with the branch router and route between VLANs locally.
With PoE loaded the unit draws 453.2W at 110V (442.2W at 220V) and dissipates 1546.38 BTU/hr, against 51.9W without PoE. A small room or shelf needs circuit and cooling capacity planned around the loaded figure.
The chassis is 268 mm wide, with one fan rated 38.9 dBA at 25°C and an operating range of -5° to 50°C. An install outside a wiring closet needs a spot that tolerates that noise and temperature range.
Persistent PoE keeps power on to attached access points while the switch reboots, and time-based PoE can switch power off on a user-defined schedule. A maintenance restart need not drop powered endpoints with it.
Application Scenarios
In a branch office, the switch powers high-draw wireless access points at up to 60W PoE++ per port, with the two SFP28 slots linking at 10G to the site router or core.
A retail store or open-plan office can house the switch outside the wiring closet, where a 38.9 dBA fan is acceptable, to power the access points and other endpoints that serve the room.
In a hotel, the switch carries guest wireless traffic, and its security and segmentation features keep guest sessions apart from each other and from business traffic.
Product Comparison
|
Parameter |
C1300X-10NU-2X | |||
|---|---|---|---|---|
|
RJ-45 ports |
10 x 5G mGig |
4 x Gigabit Ethernet + 4 x 2.5G mGig |
16 x 1G + 8 x 5G mGig |
24 x 2.5G mGig |
|
Uplink ports |
2 x SFP28 (10G Uplink, 25G available for stacking only) |
2 x SFP+ |
4 x SFP28 (10G Uplink, 25G available for stacking only) |
4 x SFP28 (10G Uplink, 25G available for stacking only) |
|
PoE power budget (power dedicated to PoE) |
385W |
120W |
740W |
740W |
|
Number of ports that support PoE |
10 |
8 |
24 |
24 |
|
PoE standards |
802.3bt (Type 3) PoE++ (60W on all 10 ports), 802.3at PoE+ |
802.3at PoE+ (30W per port), 802.3af PoE, Cisco pre-standard PoE |
802.3bt (Type 3) PoE++ (60W on 8 ports), 802.3at PoE+ (30W on 16 ports) |
802.3bt (Type 3) PoE++ (60W on 8 ports), 802.3at PoE+ (30W on 16 ports) |
|
Switching capacity |
140 Gbps |
68 Gbps |
192 Gbps |
200 Gbps |
|
Hardware stacking |
C1300X Family, up to 8 units |
C1300 Family 1, up to 8 units |
C1300X Family, up to 8 units |
C1300X Family, up to 8 units |
|
Open shortest path first (OSPF) |
OSPF v2 and v3 |
Not supported |
OSPF v2 and v3 |
OSPF v2 and v3 |
|
Acoustic noise |
1 fan, 38.9 dBA |
Fanless |
1 fan, 49.5 dBA |
1 fan, 47.9 dBA |
C1300X-10NU-2X puts 60W PoE++ on all ten 5G ports from a 385W budget, whereas C1300-8MGP-2X has eight 30W PoE+ ports, four of them 2.5G, on 120W with no OSPF. Floors with more than 10 powered ports or more than 385W need C1300X-24NGU-4X or C1300X-24MU-4X, which have 24 PoE-capable ports and 740W with four SFP28 slots, but only 8 ports at 60W. C1300-8MGP-2X suits endpoints that draw 30W or less, 120W combined, and no OSPF routing; it is fanless but belongs to C1300 Family 1, so it cannot stack with this switch. C1300X-10NU-2X has one fan rated 38.9 dBA.
PoE Power Planning
|
Planning Item |
Value or Check |
|---|---|
|
Shared budget |
385W of power dedicated to PoE across the 10 PoE-capable ports |
|
Port rating |
Each of the 10 5G ports is rated 60W PoE++ |
|
PoE standards |
802.3bt (Type 3) PoE++ and 802.3at PoE+; each endpoint’s PoE class has to fit within the 60W port rating |
|
Endpoint total |
Sum the rated draw of every access point, phone, and camera, then compare the sum with 385W instead of with ten times the 60W rating |
|
Port count |
The unit has 10 PoE-capable ports, so each powered endpoint beyond ten needs another switch |
|
Input supply |
Internal universal supply, 100-240V 50-60 Hz |
Ordering Checklist
- SFP28 uplink modules: Add a 10G module or cable per used SFP28 slot, such as SFP-10G-SR, SFP-10G-LR or SFP-10G-AOC1M. The slots are SFP28 with 10G as the uplink speed.
- Stack links: For a stack, add modules or cables for the SFP28 slots, such as SFP-H25G-CU1M or SFP-25G-AOC1M, with members from the C1300X Family only. The SFP28 slots offer 25G for stacking only, and Family members cannot stack with C1300 models.
- Power cord: Keep the cord in the package or select NO-POWER-CORD. With NO-POWER-CORD selected the box has no cord, so one must be sourced separately.
Optional Add-ons
|
Model |
Description |
|---|---|
|
CAB-CONSOLE-RJ45 |
Console cable, 6 feet, RJ-45 connector |
|
CAB-CONSOLE-USB-C |
Console cable, USB Type C connector |
|
10G SFP+ module for multimode fiber, 26 m to 400 m | |
|
10G SFP+ module for single-mode fiber, 10 km | |
|
10G SFP+ module for single-mode fiber, 40 km | |
|
SFP-10G-T-X |
10G SFP+ copper module for UTP CAT6A/CAT7 or better, 30 m |
|
10G copper coax cable, 1 m | |
|
10G copper coax cable, 3 m | |
|
10G copper coax cable, 5 m | |
|
10G active optical cable, 1 m | |
|
10G active optical cable, 3 m | |
|
10G active optical cable, 10 m |
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C1300X-10NU-2X | Product type | Fixed managed Layer 3 5G multigigabit PoE++ switch |
| Operating software | Customized Linux OS software | Total ports | 10 x 5G mGig + 2 x 10G |
| PoE++ ports | 10 x 5G, 60W PoE++ per port | Uplink ports | 2 x SFP28 (10G uplink, 25G available for stacking only) |
| Console port | Cisco standard RJ-45 console port and USB Type C port | USB port | USB Type C port for file and image management as well as console access |
| Bluetooth access | External Bluetooth dongle in the USB port gives laptops and tablets CLI access through a Telnet or SSH client and GUI access through a browser | Buttons | Reset button |
| LEDs | System, Link/Act, PoE, Speed | Switching capacity | 140 Gbps, wire speed and nonblocking |
| Forwarding rate | 104.16 Mpps (64-byte packets) | Packet buffer | 3 MB, aggregate across all ports and dynamically shared |
| Flash | 1 GB SLC | CPU | ARM dual-core at 1.5 GHz |
| DRAM | 2 GB DDR4 | MAC addresses | Up to 32,000 entries |
| VLAN IDs | Up to 4094 VLANs (4078 to 4094 reserved for internal usage) | Spanning tree protocol | MSTP with 16 instances; PVST+ and Rapid PVST+ with 126 instances |
| Port grouping/link aggregation | LACP with up to 8 groups and up to 8 ports per group | Jumbo frames | Up to 9000 bytes; default MTU is 2000 bytes |
| IGMP snooping | IGMP v1, v2, and v3 with 4000 multicast groups and source-specific multicasting | MLD snooping | MLD v1 and v2 snooping |
| Voice VLAN | Voice VLAN with Voice Services Discovery Protocol; Auto Smartports roles from Cisco Discovery Protocol or LLDP-MED | IPv4 routing | Wire-speed routing of IPv4 packets, up to 7,168 dynamic and static routes and 256 IP interfaces |
| IPv6 routing | Wire-speed routing of IPv6 packets | Layer 3 routing protocols | RIP v2, OSPF v2 and v3 (C1300X SKUs only), and policy-based routing |
| DHCP services | DHCP server, DHCP relay at Layer 3, and UDP relay | ACL entries | Up to 3,072 rules, ingress and egress, time-based ACLs supported |
| Quality of service | 8 hardware queues with strict priority and WRR scheduling | Port mirroring | Up to 8 source ports mirrored to one destination port |
| Hardware stacking | Up to 8 switches per stack, managed as one system of up to 400 ports; C1300X Family PIDs only | High-speed stack interconnects | SFP28 slots with 25G available for stacking, ring and chain options |
| Security | 802.1X, web-based authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, port security, storm control, IPv6 First Hop Security | Management | Cisco Business Dashboard embedded probe, Cisco Business mobile app, Network Plug and Play, web UI, SNMP v1/v2c/v3, text view CLI, dual images |
| Firmware upgrade | Web browser upgrade (HTTP/HTTPS), TFTP, and upgrade over SCP running over SSH; dual images for resilient upgrades | Default PoE budget | 385W of power dedicated to PoE across 10 PoE-capable ports |
| PoE standards | 802.3bt (Type 3) PoE++ and 802.3at PoE+; all 10 ports rated 60W PoE++ | Time-based PoE | PoE power on or off on a user-defined schedule |
| Persistent PoE | PoE power stays on while the switch is rebooting | Default power supply | Internal universal supply, 100-240V 50-60 Hz |
| Power consumption (worst case) | 110V=51.9W; 220V=52.5W | Power consumption with PoE (worst case) | 110V=453.2W; 220V=442.2W |
| Idle power | 110V=24.5W; 220V=27.2W | Heat dissipation | 1546.38 |
| Fan modules | 1 | Acoustic noise | 25°C: 38.9 dBA |
| MTBF at 25°C (hours) | 470,352 | Operating temperature | -5°C to 50°C (23°F to 122°F); minimum ambient temperature for cold start is 32°F (0°C) |
| Storage temperature | -25°C to 70°C (-13°F to 158°F) | Operating humidity | 10% to 90% relative, noncondensing |
| Storage humidity | 10% to 90% relative, noncondensing | Dimensions (H x W x D) | 268 x 308 x 43.94 mm (10.55 x 12.13 x 1.73 in) |
| Weight | 3.03 kg (6.68 lb) | Mounting | Rack-mountable; 19-inch brackets are included only with 24-port and 48-port models |
| Port LED control | Port LEDs can be turned off manually to save energy | Time-based port operation | Link up or down on a user-defined schedule when the port is administratively up |
| Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A | Package contents | Switch, power cord (excluded when NO-POWER-CORD is selected), mounting kit (19-inch brackets included only with 24-port and 48-port models), pointer card |
Get More Information
Need pricing, stock, or shipping details for the C1300X-10NU-2X ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email [email protected] for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.