C1300X-24T-4X – 24x1G Data Ports – 4x10G SFP28 Uplinks – OSPF Layer 3 Switch
Why Layer23-Switch
Stocked, Shipped and Supported by One Team
Ships in 1 Business Day
In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.
LSCare Warranty
3years on enterprise equipment
Free CCIE Support
Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.
Verify Before You Pay
100%factory-sealed
Get label and serial photos before shipment, and check every serial number with Cisco.
C1300X-24T-4X Description
The C1300X-24T-4X is a Cisco Catalyst 1300X Series fixed managed Layer 3 Gigabit Ethernet switch for small-business and branch-office access networks that need OSPF routing. The switch has 24 Gigabit copper ports and four SFP28 uplinks at 10G, with 128 Gbps of switching capacity and a single fan rated at 20.3 dBA. The switch has no PoE, so every port is data-only, and stacking of up to eight units accepts only C1300X Family models.
Quick Specs
|
Parameter |
Specification |
|---|---|
|
Product ID |
C1300X-24T-4X |
|
Product type |
Fixed managed Layer 3 Gigabit Ethernet switch |
|
Downlink ports |
24 x 10/100/1000 |
|
Uplink ports |
4 x SFP28 slots, 10G uplink (25G available for stacking only) |
|
Switching capacity |
128 Gbps, wire speed and nonblocking |
|
Forwarding rate |
95.23 Mpps (64-byte packets) |
|
Packet buffer |
3 MB, dynamically shared across ports |
|
Default PoE budget |
None; not a PoE switch (data only) |
|
Layer 3 routing |
RIP v2, OSPF v2 and v3, policy-based routing; up to 7,168 IPv4 routes |
|
Hardware stacking |
Up to 8 units, C1300X Family only |
|
Power input |
Internal universal supply, 100-240V 50-60 Hz |
|
Fan and noise |
1 fan, 20.3 dBA at 25°C |
|
Weight |
3.28 kg (7.23 lb) |
Product Performance
Key Features
Worst-case system draw is 31.7W at 110V (136.14 BTU/hr), and the single fan is rated 20.3 dBA at 25°C. With no PoE load to budget, demands on UPS and cooling stay small.
The switch routes IPv4 and IPv6 at wire speed with up to 7,168 IPv4 routes and 256 IP interfaces, and OSPF v2 and v3 run alongside RIP v2. DHCP server and relay functions keep VLAN routing and address assignment at the edge.
Up to eight C1300X Family units run as one system under a single IP, with hardware failover and link aggregation across members. A closet grows by adding a unit instead of replacing the switch.
Application Scenarios
In a branch office, the switch sits at the edge and runs OSPF toward the upstream router over 10G uplinks while the 24 copper ports serve desktops and printers.
A small office can keep visitor traffic apart from staff traffic, with guest VLAN and web authentication separating the two groups on data-only ports.
Because the single fan runs at 20.3 dBA, the switch can sit in a back room or open workspace rather than a dedicated wiring closet.
Product Comparison
|
Parameter |
C1300X-24T-4X | |||
|---|---|---|---|---|
|
Total ports |
24 x Gigabit Ethernet + 4 x 10G |
24 x Gigabit Ethernet + 4 x 10G |
48 x Gigabit Ethernet + 4 x 10G |
24 x Gigabit Ethernet + 4 x 10G |
|
Uplink ports |
4 x SFP28 (10G uplink, 25G for stacking only) |
4 x SFP+ |
4 x SFP28 (10G uplink, 25G for stacking only) |
4 x SFP28 (10G uplink, 25G for stacking only) |
|
PoE standards |
None (data only) |
None (data only) |
None (data only) |
30W PoE+ on 24 ports |
|
Default PoE budget |
None (data only) |
None (data only) |
None (data only) |
385W |
|
Switching capacity |
128 Gbps |
128 Gbps |
176 Gbps |
128 Gbps |
|
Packet buffer |
3 MB |
1.5 MB |
3 MB |
3 MB |
|
Layer 3 routing protocols |
RIP v2, OSPF v2 and v3 |
RIP v2 |
RIP v2, OSPF v2 and v3 |
RIP v2, OSPF v2 and v3 |
|
Hardware stacking |
C1300X Family, up to 8 units |
C1300 Family 1, up to 8 units |
C1300X Family, up to 8 units |
C1300X Family, up to 8 units |
|
Fan modules |
1 |
Fanless |
1 |
1 |
C1300X-24T-4X and C1300-24T-4X are both data-only 24 x 10/100/1000 models, but C1300X-24T-4X adds OSPF v2 and v3, 4 x SFP28 slots with 10G uplinks and 25G for stacking, and a 3 MB buffer against 1.5 MB, while C1300-24T-4X is fanless and stacks only in C1300 Family 1. A site that needs 48 data ports in the same family moves to C1300X-48T-4X, which switches 176 Gbps against 128 Gbps. Any port that must power a phone, camera or access point calls for C1300X-24P-4X, with 30W PoE+ on all 24 ports from a 385W budget. C1300-24T-4X is the choice only where OSPF is not needed.
Ordering Checklist
- Stack members: C1300X-24T-4X stacks only with C1300X Family PIDs, up to 8 units, over its SFP28 slots (25G for stacking only). Buy SFP-25G-AOC1M, SFP-H25G-CU1M or another supported 25G stack link separately; C1300 Family 1 and Family 2 models cannot join.
- Uplink optics: Add a 10G module from the supported list, such as SFP-10G-SR, SFP-10G-LR, SFP-10G-ER or SFP-10G-AOC1M, to each of the 4 SFP28 slots. The slots ship empty and the uplink runs at 10G on this model.
- Power cord: A power cord matched to the site outlet ships in the package. Select NO-POWER-CORD to leave it out, and the box then has no cord.
Optional Add-ons
|
Model |
Description |
|---|---|
|
CAB-CONSOLE-RJ45 |
Console cable, 6 feet, RJ-45 connector |
|
CAB-CONSOLE-USB-C |
Console cable, USB Type C connector |
|
RCKMNT-1RU-1K= |
1 RU rack-mount kit for Catalyst 1300 24-port and 48-port models |
|
10G SFP+ module for multimode fiber, 26 m to 400 m | |
|
10G SFP+ module for single-mode fiber, 10 km | |
|
10G SFP+ module for single-mode fiber, 40 km | |
|
SFP-10G-T-X |
10G SFP+ copper module for UTP CAT6A/CAT7 or better, 30 m |
|
10G copper coax cable, 1 m | |
|
10G copper coax cable, 3 m | |
|
10G copper coax cable, 5 m | |
|
10G active optical cable, 1 m | |
|
10G active optical cable, 3 m | |
|
10G active optical cable, 10 m | |
|
25G passive twinax cable, 1 m (stacking) | |
|
25G active optical cable, 1 m (stacking) |
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Product ID | C1300X-24T-4X | Product type | Fixed managed Layer 3 Gigabit Ethernet switch |
| Operating software | Customized Linux OS software | Total ports | 24 x Gigabit Ethernet + 4 x 10G |
| Downlink ports | 24 x 10/100/1000 | Uplink ports | 4 x SFP28 (10G uplink, 25G available for stacking only) |
| Console port | Cisco standard RJ-45 console port and USB Type C port | USB port | USB Type C port for file and image management and console access |
| Buttons | Reset button | Port LED control | Port LEDs can be turned off manually to save energy |
| Switching capacity | 128 Gbps, wire speed and nonblocking | Forwarding rate | 95.23 Mpps (64-byte packets) |
| Packet buffer | 3 MB, aggregate across all ports and dynamically shared | Flash | 1 GB SLC |
| CPU | ARM dual-core at 1.5 GHz | DRAM | 2 GB DDR4 |
| MAC addresses | Up to 32,000 entries | VLAN IDs | Up to 4094 VLANs (4078 to 4094 reserved for internal usage) |
| IPv4 routing scale | Up to 7,168 IPv4 routes (dynamic and static) and 256 IP interfaces | IPv6 routing | Wire-speed routing of IPv6 packets |
| Layer 3 routing protocols | RIP v2, OSPF v2 and v3, and policy-based routing | DHCP services | DHCP server, DHCP relay, and UDP relay |
| ACL entries | Up to 3,072 rules, ingress and egress, time-based ACLs supported | IGMP snooping | IGMP v1, v2, and v3 with 4,000 multicast groups |
| Spanning tree protocol | MSTP with 16 instances; PVST+ and Rapid PVST+ with 126 instances | Port grouping/link aggregation | LACP with up to 8 groups and up to 8 ports per group |
| Jumbo frames | Up to 9000 bytes; default MTU is 2000 bytes | Quality of service | 8 hardware queues with strict priority and WRR scheduling |
| Hardware stacking | Up to 8 switches in one stack, which manages up to 400 ports as one system; C1300X Family PIDs only | High-speed stack interconnects | SFP28 slots, up to 25G for stacking; ring and chain options |
| Security | 802.1X, web-based authentication, DHCP snooping, IP Source Guard, Dynamic ARP Inspection, port security, storm control, IPv6 First Hop Security, RADIUS and TACACS+ | Management | Cisco Business Dashboard embedded probe, Cisco Business mobile app, Network Plug and Play, web UI, SNMP v1/v2c/v3, text view CLI, dual images |
| Energy efficiency | IEEE 802.3az Energy Efficient Ethernet on all copper Gigabit Ethernet ports | Default PoE budget | None; not a PoE switch (data only) |
| Default power supply | Internal universal supply, 100-240V 50-60 Hz | Power consumption (worst case) | 110V=31.7W; 220V=32.1W |
| Heat dissipation | 136.14 | Fan modules | 1 |
| Acoustic noise | 25°C: 20.3 dBA | MTBF at 25°C (hours) | 458,135 |
| Operating temperature | -5°C to 50°C (23°F to 122°F); minimum ambient temperature for cold start is 32°F (0°C) | Storage temperature | -25°C to 70°C (-13°F to 158°F) |
| Operating humidity | 10% to 90% relative, noncondensing | Storage humidity | 10% to 90% relative, noncondensing |
| Dimensions (H x W x D) | 444.3 x 270 x 43.94 mm (17.49 x 10.63 x 1.73 in) | Weight | 3.28 kg (7.23 lb) |
| Mounting | Rack-mountable, 19-inch mounting brackets included | Fiber type | UTP Category 5e or better for 1000BASE-T |
| Certifications | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A | Package contents | Switch, power cord (excluded when NO-POWER-CORD is selected), mounting kit, pointer card |
Get More Information
Need pricing, stock, or shipping details for the C1300X-24T-4X ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email [email protected] for a fast quotation.
Quality Certifications
Customer Reviews
Questions & Answers
Warranty
Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.
All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.
Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.
If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.
We support multiple secure payment and logistics options, backed by industry-leading verification:
Visit How to Pay page for more information
Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information
Verify, plan, and comparewith confidence
Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.
Standard Services
Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.
- Projects and Technical Support
- Easy Purchasing Supply
- Product Lifecycle Protection
- Exclusive F3 Team Support
Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.