Can C9300-24UXB-A be stacked?

Yes, but only with other higher-scale Catalyst 9300 models. C9300-24UXB-A stacks up to eight members over StackWise-480, and standard C9300 switches cannot join the stack. StackPower is supported across the stacked members.

What does Network Advantage on C9300-24UXB-A include?

Network Advantage on C9300-24UXB-A includes VRF, VXLAN, TrustSec, BGP and MACsec-256, plus Layer 2 and routed access. The -A suffix carries this tier, backed by higher-scale tables of 112,000 IPv4 routes and 64,000 MAC addresses.

How many switches can share power in one StackPower ring with C9300-24UXB-A?

A StackPower ring supports up to four stack members sharing power. With the XPS 2200 expandable power system, up to eight members can be supported. Order the ring cables as CAB-SPWR-30CM or CAB-SPWR-150CM, because StackPower is available only on modular-uplink Catalyst 9300 models and not on the fixed-uplink C9300L and C9300LM.

Can C9300-24UXB-A use PWR-C1-1900WAC-P as a second power supply?

Yes. PWR-C1-1900WAC-P is listed as an orderable supply for modular-uplink Catalyst 9300 models and mixes with the other 9300 supplies. It outputs 1500W at 115V input and 1900W at 230V input, and it uses its own power cord. Each switch takes two supplies in N+1 redundancy.

Do PoE devices on C9300-24UXB-A stay powered during a software reload?

Yes for soft reloads. Perpetual PoE keeps device power through an upgrade, a crash or a manual reboot, and it works across a stack. It does not cover power loss, front-end processor removal or hibernation. Fast PoE restores device power in under 30 seconds from stored power and needs perpetual-poe-ha configured on the port.

How many NetFlow entries does C9300-24UXB-A support?

C9300-24UXB-A supports up to 256,000 NetFlow entries because it is the higher-scale 24-port mGig model. Flexible NetFlow tables run 64,000-128,000 per model elsewhere in the family. Size flow monitors for a closet of 24 multigigabit ports against that figure.

Does a Network Advantage subscription for C9300-24UXB-A include ThousandEyes?

Yes. The ThousandEyes Network and Application Synthetics license, PID TE-EMBEDDED-T, is included by default with 3, 5 or 7-year Cisco Catalyst or Cisco DNA Advantage subscriptions on Catalyst 9300 switches, for the same term as the subscription. It is not included with Essentials subscriptions.

Which USB SSD options can C9300-24UXB-A use for external storage?

C9300-24UXB-A takes an external USB 3.0 SSD, orderable as SSD-120G (120 GB) or SSD-240G (240 GB). The two drives are orderable across the Catalyst 9300 family and are not split by model, so one spare type covers every closet that runs modular-uplink Catalyst 9300 switches.

What must match across a StackWise-480 stack that includes C9300-24UXB-A?

All members of the stack run SSO and NSF, and they need the same IOS XE release and the same license tier. A Network Advantage member such as C9300-24UXB-A cannot join an Essentials stack. Only higher-scale members can be added, and a stack holds up to eight switches.

C9300-24UXB-A – 24x10G mGig UPOE Ports – Higher-Scale Buffer – 560W PoE Budget

Name: C9300-24UXB-A - Cisco 24-Port 10G mGig UPOE Network Advantage Switch
Brand: Cisco
SKU: C9300-24UXB-A
Price: 4967.04 USD
Availability: InStock
Rating: 5 (11 reviews)

Brand: Cisco Category: Catalyst 9300 Switches Availability:

In Stock

Model: C9300-24UXB-A

Cisco SN CheckSN verification before shipment.Verify authenticity3-Year WarrantyExtended, enterprise-gradeWarranty terms14-Day ReturnsStraightforward RMA processReturn policy

Rated 5 out of 5 based on 11 customer ratings

5.011 reviews9 Questions6 sold this month

List Price: ~~$24,876.35~~ 80% OFF

$4,967.04

Price Alert

Condition

Related

Subscription C9300-DNA-A + $1,483.66 Subtotal Price $6,450.70

Quantity

Shipping Express Shipping 2-6 Business Days, via UPS, FedEx, DHL and more

Trusted & Secure Payments

Shop Expert-Recommended Accessories for the C9300-24UXB-A

Explore optics, stacking accessories, modules, and power supplies—all verified by our engineers for use with this model.

SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMF
Original price was: $853.95.Current price is: $52.00.
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4
Original price was: $1,213.85.Current price is: $91.68.
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMF
Original price was: $2,439.88.Current price is: $150.00.
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km Reach
Original price was: $4,873.66.Current price is: $149.00.
SFP-25G-SR-S
25GBASE-SR SFP28 - 850nm MMF - 100m OM4
Original price was: $1,213.85.Current price is: $258.00.
SFP-10/25G-LR-S
10/25GBASE-LR SFP28 - 10 km G.652 SMF - 0 to 70°C Commercial Temperature
Original price was: $2,787.19.Current price is: $431.00.
QSFP-40G-SR4
40G SR4 QSFP - MPO-12 MMF - 4x10G Breakout
Original price was: $3,653.72.Current price is: $126.00.
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOM
Original price was: $1,260.58.Current price is: $95.80.
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m Reach
Original price was: $570.10.Current price is: $70.00.
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOM
Original price was: $633.46.Current price is: $59.00.
STACK-T1-50CM
50cm Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $121.99.Current price is: $70.00.
STACK-T1-1M
1m Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $252.03.Current price is: $140.00.
STACK-T1-3M
3m Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $378.07.Current price is: $200.00.
C9300-NM-2Y
2x25G/10G/1G SFP28 Ports - Catalyst 9300 Module
Original price was: $3,227.37.Current price is: $1,122.00.
C9300-NM-2Q
2x40G QSFP+ Uplinks - Catalyst 9300 Module
Original price was: $3,213.50.Current price is: $800.00.
C9300-NM-4G
4x1GE SFP Ports - Catalyst 9300 Module
Original price was: $680.51.Current price is: $231.00.
C9300-NM-4M
4x10G/mGig Copper Ports - Catalyst 9300 Module
Original price was: $1,890.30.Current price is: $626.00.
C9300-NM-8X
8x10G/1G SFP+ Uplinks - Network Module - Catalyst 9300
Original price was: $3,213.50.Current price is: $761.00.
PWR-C1-1100WAC-P
1100W AC PSU - Catalyst 9300 C1 - Platinum Rated
Original price was: $2,317.88.Current price is: $689.00.

Why Layer23-Switch

Stocked, Shipped and Supported by One Team

Founded

Customers

Units shipped

Countries

Inventory You Can See

Cisco stock on hand

Models ready to ship

Warehouse space

Ships in 1 Business Day

In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.

DHL FedEx UPS Duties included: US · CA · UK

LSCare Warranty

3years on enterprise equipment

Advance replacement for in-stock models
New unit for dead-on-arrival
14-day returns on sealed items

Free CCIE Support

Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.

Part number check Configuration Troubleshooting

Verify Before You Pay

100%factory-sealed

Get label and serial photos before shipment, and check every serial number with Cisco.

C9300-24UXB-A Description

The C9300-24UXB-A is a Cisco Catalyst 9300 Series higher-scale stackable access switch for campus wiring closets that serve multigigabit endpoints and need deeper address and route tables. The switch has 24 multigigabit UPOE ports, a modular uplink slot, 640 Gbps of switching capacity, a 560W default PoE budget, a 64 MB packet buffer and Network Advantage licensing. As a higher-scale model it stacks only with other higher-scale Catalyst 9300 switches, not with standard C9300 units.

Quick Specs

Parameter	Specification
Product ID	C9300-24UXB-A
Product type	Higher-scale stackable access switch with modular uplinks
Downlink ports	24 x 100M/1G/2.5G/5G/10G multigigabit Cisco UPOE copper ports
Scale profile	Catalyst 9300 higher-scale model
Packet buffer	64 MB for the 24-port Multigigabit higher-scale model
Network license	Network Advantage
Uplink architecture	Modular uplink slot for Cisco Catalyst 9300 network modules
Default power supply	PWR-C1-1100WAC-P
Default PoE budget	560W
Stacking and StackPower	StackWise-480 with StackPower support
Expanded PoE budget	1440W with supported secondary power supply configuration
Minimum software release	Cisco IOS XE Gibraltar 16.12.1
Switching and forwarding	640 Gbps standalone switching; 476.19 Mpps standalone forwarding

Product Performance

Higher-scale mGig packet buffer

Default PoE budget

Standalone switching capacity

Key Features

Multigigabit UPOE Downlinks

All 24 copper ports negotiate 100M, 1G, 2.5G, 5G or 10G and deliver Cisco UPOE, so one port type serves Wi-Fi access points and high-draw endpoints.

64 MB Packet Buffer

The 24-port multigigabit higher-scale model carries a 64 MB buffer, which gives bursty multigigabit traffic more headroom than standard Catalyst 9300 multigigabit models.

Larger Forwarding Tables

The higher-scale group supports 64,000 MAC addresses, 112,000 IPv4 routes, 56,000 IPv6 routes and 18,000 QoS and ACL entries.

Network Advantage Feature Scope

The -A suffix adds VRF, VXLAN, TrustSec, BGP and MACsec-256 on top of Layer 2 and routed access.

Higher-Scale Stacking Boundary

StackWise-480 supports up to eight members, but higher-scale models stack only with other higher-scale models and not with standard C9300 switches.

Modular Uplink Slot

Uplink media comes from a separate Catalyst 9300 network module, with options from 1G SFP to 25G SFP28 and 40G QSFP, so the access ports do not fix the uplink speed.

Application Scenarios

Large Campus Access Closet

In a wiring closet that serves many Wi-Fi access points and multigigabit desktops, the switch uses its 64,000 MAC address table and 112,000 route capacity to hold a large number of attached clients.

Multigigabit UPOE Floor

A floor of high-draw endpoints such as PTZ cameras and multigigabit access points can run from the 24 UPOE ports, with a second supply added when the 560W default budget runs short.

Higher-Scale Stack Group

A building that already runs higher-scale Catalyst 9300 members can add this switch to the same stack, since higher-scale models stack only with each other.

Product Comparison

Parameter	C9300-24UXB-A	C9300-24UXB-E	C9300-24UX-A	C9300-24UB-A
Downlink ports	24 x 100M/1G/2.5G/5G/10G UPOE	24 x 100M/1G/2.5G/5G/10G UPOE	24 x 100M/1G/2.5G/5G/10G UPOE	24 x 10/100/1000 UPOE
Available PoE power (default)	560W	560W	560W	830W
Network module uplinks	Modular	Modular	Modular	Modular
Network license	Network Advantage	Network Essentials	Network Advantage	Network Advantage
Stack bandwidth	480 Gbps; higher-scale models only	480 Gbps; higher-scale models only	480 Gbps; standard C9300 models only	480 Gbps; higher-scale models only
Switching capacity	640 Gbps	640 Gbps	640 Gbps	208 Gbps
Packet buffer	64 MB	64 MB	32 MB	32 MB
MAC addresses	64,000	64,000	32,000	64,000
IPv4 routes	112,000	112,000	32,000	112,000

C9300-24UXB-A is the Network Advantage version of the higher-scale 24-port Multigigabit UPOE switch also sold as C9300-24UXB-E, and the license tier is the only difference between the two. Essentials-level designs without VRF, VXLAN, TrustSec, BGP or MACsec-256 can order C9300-24UXB-E, and an installed Essentials switch is lifted later with a C9300-24-E-A-3, -5 or -7 term. The 64 MB buffer, 64,000 MAC addresses and 112,000 routes separate it from C9300-24UX-A, which has 32,000 MAC addresses and 32,000 routes, but higher-scale members stack only with other higher-scale models. Gigabit UPOE access with 830W of default PoE moves to C9300-24UB-A.

PoE Power Planning

Planning Item	Cisco Confirmed Value	Order Impact
Default PoE budget	C9300-24UXB-A is listed with 560W available PoE and PWR-C1-1100WAC-P as the default supply	Size the powered endpoint count against the default supply before adding a secondary power supply
Secondary supply options	The C9300-24UXB-A power table lists 910W with a 350W secondary supply, 1275W with a 715W secondary supply, and 1440W with an 1100W secondary supply	Decide whether the quote needs extra PoE capacity or only power redundancy
UPOE port class	Cisco UPOE ports support Type 1, Type 2, Type 3, and Cisco UPOE powered devices up to 60W per port	Prevent substitution with data-only, PoE+, or UPOE+ SKUs unless the endpoint power class changes
StackPower	StackPower can let a switch use power from other stack members when internal supplies cannot support the total load	Add StackPower cabling only where the site power design uses shared stack power

Ordering Checklist

Software subscription: Order a 24-port Advantage term: C9300-DNA-A-24-3Y, C9300-DNA-A-24-5Y or C9300-DNA-A-24-7Y. Cisco DNA Advantage is the default selection and matches this Network Advantage switch; a different tier is not accepted on a new order.
Uplink module: Keep the default C9300-NM-8X, pick C9300-NM-4G, C9300-NM-4M, C9300-NM-2Q or C9300-NM-2Y, or select C9300-NM-NONE. The uplink slot takes Catalyst 9300 modules only; C9300X modules do not fit.
Second power supply: A second PWR-C1-1100WAC-P is selected by default and C9300-SPS-NONE removes it. A single supply leaves the PoE budget at 560W.
Stacking cables: The default 50 cm StackWise cable and 30 cm StackPower cable ship unless C9300-STACK-NONE and C9300-SPWR-NONE remove them. A stack with members in different rows needs longer cables, which the 50 cm default does not cover.
Power cords: Select the cord type for the destination country; two cords ship with the switch. The configurator defaults to North America cords.

Optional Add-ons

Model	Description
C9300-NM-4G	Catalyst 9300 4 x 1GE SFP network module
C9300-NM-8X	Catalyst 9300 8 x 10G/1G SFP+ network module
C9300-NM-2Q	Catalyst 9300 2 x 40GE QSFP network module
C9300-NM-2Y	Catalyst 9300 2 x 25G/10G/1G SFP28 network module
C9300-NM-4M	Catalyst 9300 4 x 10G/mGig copper network module
NM-BLANK-T1=	Cisco Catalyst Type 1 network module blank spare
C9300-DNA-A-24-3Y	C9300 Cisco DNA Advantage 24-port 3 Year Term license
C9300-DNA-A-24-5Y	C9300 Cisco DNA Advantage 24-port 5 Year Term license
C9300-DNA-A-24-7Y	C9300 Cisco DNA Advantage 24-port 7 Year Term license
PWR-C1-1100WAC-P=	1100W AC Platinum-rated power supply spare
STACK-T1-50CM=	Data stack 50 cm cable option for C9300 and C9300X SKUs
STACK-T1-1M=	Data stack 1 m cable option for C9300 and C9300X SKUs
STACK-T1-3M=	Data stack 3 m cable option for C9300 and C9300X SKUs

C9300-24UXB-A Switch Rear Panel

The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.

1	Ground connectors	7	StackPower connectors
2	USB3.0–SSD port	8	AC OK (input) status LED
3	BEACON LED	9	PS OK (output) status LED
4	CONSOLE (RJ-45 console port)	10	StackWise-480 port connectors
5	MGMT (RJ-45 10/100/1000 management port)	11	Power supply modules
6	Fan modules	–	–

Rear Panel of a Cisco Catalyst 9300 Series Switch

Components Delivered in the Shipping Box

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

1	Cisco Catalyst 9300 Series switch with optional network module¹ (power supply and fan modules not shown)	9	Eight number-8 Phillips flat-head screws
2	AC power cord	10	Cable guide
3	Product documentation and compliance document	11	M4.0 x 20mm Phillips pan-head screw
4	Four rubber mounting feet	12	(Optional) RJ-45 console cable
5	Ground lug screw and ring terminal	13	(Optional) USB console cable
6	Two 19-inch mounting brackets	14	(Optional) StackWise-480/1T cable (0.5-meter, 1-meter, or 3-meter)
7	Four number-12 pan-head screws	15	(Optional) StackPower cable (0.3-meter or 1.5-meter)
8	Four number-10 pan-head screws	16	(Optional) StackWise-320 cable

Specifications

Parameter	Specification	Parameter	Specification
Product ID	C9300-24UXB-A	Product type	Higher-scale stackable access switch with modular uplinks
Network license	Network Advantage	Downlink ports	24 x 100M/1G/2.5G/5G/10G multigigabit Cisco UPOE copper ports
Scale profile	Catalyst 9300 higher-scale model	Default power supply	PWR-C1-1100WAC-P
Default PoE budget	560W	PoE with 350W secondary supply	910W
PoE with 715W secondary supply	1275W	PoE with 1100W secondary supply	1440W maximum by port rating
Uplink architecture	Optional field-replaceable C9300 network module	Supported network modules	C9300-NM-4G, C9300-NM-8X, C9300-NM-2Q, C9300-NM-2Y, C9300-NM-4M
Stacking architecture	StackWise-480	Stack members	Higher-scale C9300 models only
Stack bandwidth	480 Gbps	StackPower	Supported
Minimum software release	Cisco IOS XE Gibraltar 16.12.1	Packet buffer	64 MB
Flexible NetFlow entries	256,000 flows for higher-scale 24-port Multigigabit models	MAC addresses	64,000
IPv4 routes	112,000 total routes	IPv6 routes	56,000
Multicast routes	16,000	QoS entries	18,000
ACL entries	18,000	DRAM	8 GB
Flash	16 GB	VLAN IDs	4094
Jumbo frames	9198 bytes	Switching capacity	640 Gbps standalone
Switching capacity with stacking	1,120 Gbps	Forwarding rate	476.19 Mpps standalone
Forwarding rate with stacking	833.33 Mpps	Dimensions	1.73 x 17.5 x 20.2 in. (4.4 x 44.5 x 51.3 cm)
Power supply input	PWR-C1-1100WAC-P supports 115 to 240 VAC autoranging	UPOE support	Type 1, Type 2, Type 3, and Cisco UPOE powered devices up to 60W per port

Quality Certifications

Customer Reviews

Write A Review

5.0

Rated 5 out of 5

(11 reviews)

5 Stars

4 Stars

3 Stars

2 Stars

1 Stars

Patrick Smith

Posted on 26/04/2026

Verified Buyer

Rated 5 out of 5

5.0

Our quality benchmark is high. Layer23 hits it every time.

Victoria Rogers

Posted on 17/04/2026

Verified Buyer

Rated 5 out of 5

5.0

Reliable end-to-end. Layer23 has my repeat business.

Carl Johansson

Posted on 23/03/2026

Verified Buyer

Rated 5 out of 5

5.0

Their pricing strategy clearly aims for long-term customer relationships.

Bruce Banner

Posted on 05/09/2025

Verified Buyer

Rated 5 out of 5

5.0

Verified genuine. No issues with the hardware validation.

Natasha Romanoff

Posted on 18/06/2025

Verified Buyer

Rated 5 out of 5

5.0

Discreet packaging and fast service. Exactly what we needed.

Questions & Answers

Can C9300-24UXB-A be stacked?
Yes, but only with other higher-scale Catalyst 9300 models. C9300-24UXB-A stacks up to eight members over StackWise-480, and standard C9300 switches cannot join the stack. StackPower is supported across the stacked members.
What does Network Advantage on C9300-24UXB-A include?
Network Advantage on C9300-24UXB-A includes VRF, VXLAN, TrustSec, BGP and MACsec-256, plus Layer 2 and routed access. The -A suffix carries this tier, backed by higher-scale tables of 112,000 IPv4 routes and 64,000 MAC addresses.
How many switches can share power in one StackPower ring with C9300-24UXB-A?
A StackPower ring supports up to four stack members sharing power. With the XPS 2200 expandable power system, up to eight members can be supported. Order the ring cables as CAB-SPWR-30CM or CAB-SPWR-150CM, because StackPower is available only on modular-uplink Catalyst 9300 models and not on the fixed-uplink C9300L and C9300LM.
Can C9300-24UXB-A use PWR-C1-1900WAC-P as a second power supply?
Yes. PWR-C1-1900WAC-P is listed as an orderable supply for modular-uplink Catalyst 9300 models and mixes with the other 9300 supplies. It outputs 1500W at 115V input and 1900W at 230V input, and it uses its own power cord. Each switch takes two supplies in N+1 redundancy.
Do PoE devices on C9300-24UXB-A stay powered during a software reload?
Yes for soft reloads. Perpetual PoE keeps device power through an upgrade, a crash or a manual reboot, and it works across a stack. It does not cover power loss, front-end processor removal or hibernation. Fast PoE restores device power in under 30 seconds from stored power and needs perpetual-poe-ha configured on the port.
How many NetFlow entries does C9300-24UXB-A support?
C9300-24UXB-A supports up to 256,000 NetFlow entries because it is the higher-scale 24-port mGig model. Flexible NetFlow tables run 64,000-128,000 per model elsewhere in the family. Size flow monitors for a closet of 24 multigigabit ports against that figure.
Does a Network Advantage subscription for C9300-24UXB-A include ThousandEyes?
Yes. The ThousandEyes Network and Application Synthetics license, PID TE-EMBEDDED-T, is included by default with 3, 5 or 7-year Cisco Catalyst or Cisco DNA Advantage subscriptions on Catalyst 9300 switches, for the same term as the subscription. It is not included with Essentials subscriptions.
Which USB SSD options can C9300-24UXB-A use for external storage?
C9300-24UXB-A takes an external USB 3.0 SSD, orderable as SSD-120G (120 GB) or SSD-240G (240 GB). The two drives are orderable across the Catalyst 9300 family and are not split by model, so one spare type covers every closet that runs modular-uplink Catalyst 9300 switches.
What must match across a StackWise-480 stack that includes C9300-24UXB-A?
All members of the stack run SSO and NSF, and they need the same IOS XE release and the same license tier. A Network Advantage member such as C9300-24UXB-A cannot join an Essentials stack. Only higher-scale members can be added, and a stack holds up to eight switches.

Warranty

100% Low Price Guarantee:

Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.

100% Quality Assurance:

All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.

Free CCIE Technical Support:

Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.

100% Money Back Guarantee:

If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.

Flexible & Secure Payment and Shipping:

We support multiple secure payment and logistics options, backed by industry-leading verification:

Visit How to Pay page for more information

Warranty Coverage & RMA Instructions

Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information

FREE NETWORK TOOLS

Verify, plan, and comparewith confidence

Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Check lifecycle dates

Cisco Switch Selector Tool

Filter Cisco switches by ports, uplinks, PoE, performance, features, license, and budget.

Find matching switches >

Cisco Serial Number Lookup

Verify authenticity and identify exactmodel, coverage, and lifecycle detailsusing a Cisco serial number.

Verify a serial number >

Product Comparison

Compare specifications, capabilitiesand form factors side-by-side tochoose the right hardware.

Cisco Compare products >

C9300-24UXB-A – 24x10G mGig UPOE Ports – Higher-Scale Buffer – 560W PoE Budget

Shop Expert-Recommended Accessories for the C9300-24UXB-A

Stocked, Shipped and Supported by One Team

Inventory You Can See

Ships in 1 Business Day

LSCare Warranty

Free CCIE Support

Verify Before You Pay

C9300-24UXB-A Description

Quick Specs

Product Performance

Key Features

Application Scenarios

Product Comparison

PoE Power Planning

Ordering Checklist

Optional Add-ons

C9300-24UXB-A Switch Rear Panel

Components Delivered in the Shipping Box

Specifications

Quality Certifications

Customer Reviews

Questions & Answers

Can C9300-24UXB-A be stacked?

What does Network Advantage on C9300-24UXB-A include?

How many switches can share power in one StackPower ring with C9300-24UXB-A?

Can C9300-24UXB-A use PWR-C1-1900WAC-P as a second power supply?

Do PoE devices on C9300-24UXB-A stay powered during a software reload?

How many NetFlow entries does C9300-24UXB-A support?

Does a Network Advantage subscription for C9300-24UXB-A include ThousandEyes?

Which USB SSD options can C9300-24UXB-A use for external storage?

What must match across a StackWise-480 stack that includes C9300-24UXB-A?

Warranty

Verify, plan, and comparewith confidence

Cisco Switch Selector Tool

Cisco Serial Number Lookup

Product Comparison

DataSheet Downloads

Related Searches of Catalyst 9300 Switches