What is Cisco C9300-24T-A used for?

Cisco C9300-24T-A is used for 24-port Gigabit copper access where endpoints have their own power and the switch needs modular uplinks plus Network Advantage licensing. It fits wiring closets that need stronger Layer 3 and policy capability without paying for unused PoE hardware.

Does C9300-24T-A support PoE?

No. C9300-24T-A is a data-only 24-port RJ-45 switch and does not provide PoE to phones, cameras, or access points. If endpoint power is required, compare it with C9300-24P-A or C9300-24U-A.

How is C9300-24T-A different from C9300-24T-E?

C9300-24T-A and C9300-24T-E share the same 24-port data-only hardware profile, but C9300-24T-A ships with Network Advantage while C9300-24T-E ships with Network Essentials. Choose the A SKU when advanced routing or policy features are required from the start.

What uplink options can C9300-24T-A use?

C9300-24T-A uses Catalyst 9300 modular uplink network modules, so uplink choices can include 1G, 10G, 25G, 40G, or multigigabit options depending on the installed module. That flexibility is a key reason to choose this model over fixed-uplink switches.

Can C9300-24T-A be stacked?

Yes. C9300-24T-A supports StackWise-480 and StackPower, making it suitable for access stacks that need simplified management and power resiliency. Stack planning should keep the models, software release, and uplink modules consistent.

Is C9300-24T-A a good switch for routed access?

Yes. C9300-24T-A is a stronger routed-access choice than the E version because Network Advantage enables more Layer 3 and policy capability. It is useful when the access layer participates in more than basic Layer 2 switching.

What power supply is typical for C9300-24T-A?

C9300-24T-A is commonly ordered with a 350W AC power supply because it does not reserve power for PoE endpoints. Buyers planning redundant power should verify the second power supply and StackPower design separately.

When is C9300-24T-A not the best choice?

C9300-24T-A is not the best choice when the closet needs PoE, 48 copper ports, multigigabit access, or a lower software tier. C9300-24P-A, C9300-48T-A, C9300-24UX-A, or C9300-24T-E may fit those cases better.

C9300-24T-A – 24x1G Data Ports – Modular Uplink – Network Advantage

Name: C9300-24T-A Price - Cat 9300 24-Port 1G Data Modular Uplink
Brand: Cisco
SKU: C9300-24T-A
Price: 1613.00 USD
Availability: InStock
Rating: 4.94 (16 reviews)

Brand: Cisco Category: Catalyst 9300 Switches Availability:

In Stock

Model: C9300-24T-A

Cisco SN CheckSN verification before shipment.Verify authenticity3-Year WarrantyExtended, enterprise-gradeWarranty terms14-Day ReturnsStraightforward RMA processReturn policy

Rated 4.94 out of 5 based on 16 customer ratings

4.916 reviews8 Questions

List Price: ~~$11,698.66~~ 86% OFF

$1,613.00

Price Alert

Condition

Related

Subscription C9300-DNA-A + $889.70 Subtotal Price $2,502.70

Quantity

Shipping Express Shipping 2-6 Business Days, via UPS, FedEx, DHL and more

Trusted & Secure Payments

Cisco C9300-24T-A Compatible Accessories, Modules & Spare Parts

Find compatible network modules, power supplies, fans, optics, cables and spare parts for the Cisco C9300-24T-A. These accessories support fiber connectivity, hardware replacement, spare inventory and network maintenance projects.

SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMF
Rated 5 out of 5
Original price was: $1,870.01.Current price is: $52.00. Condition: New Factory Sealed
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4
Rated 4.75 out of 5
Original price was: $2,658.11.Current price is: $71.68. Condition: New Factory Sealed
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMF
Rated 4.75 out of 5
Original price was: $5,342.92.Current price is: $150.00. Condition: New Factory Sealed
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km Reach
Rated 4.88 out of 5
Original price was: $10,672.47.Current price is: $170.00. Condition: New Factory Sealed
SFP-25G-SR-S
25GBASE-SR SFP28 - 850nm MMF - 100m OM4
Rated 4.75 out of 5
Original price was: $2,658.11.Current price is: $310.00. Condition: New Factory Sealed
SFP-10/25G-LR-S
10/25GBASE-LR SFP28 - 1310nm 10km SMF Transceiver
Rated 4.75 out of 5
Original price was: $5,877.20.Current price is: $431.00. Condition: New Factory Sealed
QSFP-40G-SR4
40G SR4 QSFP - MPO-12 MMF - 4x10G Breakout
Rated 4.86 out of 5
Original price was: $8,001.01.Current price is: $173.00. Condition: New Factory Sealed
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOM
Rated 4.91 out of 5
Original price was: $2,658.11.Current price is: $95.80. Condition: New Factory Sealed
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m Reach
Rated 4.89 out of 5
Original price was: $1,202.16.Current price is: $70.00. Condition: New Factory Sealed
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOM
Rated 5 out of 5
Original price was: $1,335.73.Current price is: $57.00. Condition: New Factory Sealed

Stable Global Supply Chain for Thriving Businesses.

$8,000,000 Inventory
Certified Cisco Partner ships
Collaborating with FedEx, UPS, DHL

Free Expert Support from Planning to Deployment

Assistance with product selection and network solution design
Configuration guidance and best-practice recommendations
Troubleshooting support provided by CCIE-level technical experts

Established Global IT Distributor

With over a decade of industry experience, we are a certified Cisco Partner delivering genuine enterprise networking hardware and trusted services to system integrators, ISPs, and enterprises worldwide.

C9300-24T-A Description

The C9300-24T-A is a Cisco Catalyst 9300 modular-uplink access switch built for 24-port 1G copper data connectivity without PoE, ordered with the Network Advantage perpetual license and a matching Cisco Catalyst or Cisco DNA Advantage software subscription. The switch ships with an empty uplink network module bay, so the uplink medium and speed are chosen separately from modules such as the C9300-NM-8X (8x 10G/1G SFP+) or C9300-NM-2Q (2x 40G QSFP+), letting the same 24-port chassis serve as either a fiber-aggregated wiring-closet switch or a higher-density stack member. Switching capacity is 208 Gbps with a 154.76 Mpps forwarding rate, and up to 8 units can join a single StackWise-480 stack for 688 Gbps of combined bandwidth, with Cisco StackPower available for shared power redundancy across the stack. Because this is a data-only chassis with a default 350W AC power supply, it fits copper access roles where endpoints do not draw PoE, while the Network Advantage license unlocks routing scale, network segmentation (VXLAN, TrustSec, MPLS), and automation features that the same hardware running Network Essentials on the C9300-24T-E does not include.

Quick Specs

Parameter	Specification
Product ID	C9300-24T-A
Port Count	24x 10/100/1000 copper (data only, no PoE)
Uplink	Modular uplink bay (network module ordered separately)
Network License	Network Advantage
Switching Capacity	208 Gbps (688 Gbps stacked)
Forwarding Rate	154.76 Mpps (511.90 Mpps stacked)
Stacking	StackWise-480, up to 8 members, StackPower supported
Default Power Supply	PWR-C1-350WAC-P, 350W AC
Optional Second Power Supply	PWR-C1-715WAC-P or PWR-C1-1100WAC-P
Minimum Software Release	Cisco IOS XE Release 16.5.1a
Chassis Dimensions (with default supply)	1.73 x 17.5 x 17.7 in
Weight (with fans and default supply)	16.03 lb (7.27 kg)

Product Performance

Switching Capacity

Forwarding Rate

Stacked Switching Capacity (StackWise-480, 8 Members)

Key Features

Network Module Choice for Uplink Speed

The empty modular uplink bay lets the same C9300-24T-A chassis take a C9300-NM-8X for 8x 10G/1G SFP+ fiber uplinks, a C9300-NM-2Q for 2x 40G, or a lower-cost C9300-NM-4G for 4x 1G, so the uplink budget is set at BOM time rather than fixed at the factory.

StackWise-480 Stack Growth

Up to 8 C9300-24T-A units can join a single StackWise-480 stack for 688 Gbps of combined switching capacity, letting a wiring closet grow port count without adding separate management points.

StackPower Shared Redundancy

StackPower lets stack members share power across the ring, so a closet that loses one supply on one member can draw backup power from a neighboring unit instead of requiring a dedicated second supply in every chassis.

Network Advantage Segmentation and Automation

The Network Advantage license adds VRF, VXLAN, LISP, and Cisco TrustSec segmentation plus NETCONF/RESTCONF/YANG automation and MACsec-256, capabilities the same hardware does not carry under the Network Essentials tier used on C9300-24T-E.

Data-Only Power Profile

The default 350W AC supply is sized for a non-PoE copper access role; no PoE budget is available at this port count, which keeps the power footprint smaller than the PoE+ variants in the same chassis family.

Minimum Software Baseline Applies Before Fleet Rollout

C9300-24T-A requires Cisco IOS XE Release 16.5.1a or later; a site running an older Catalyst 9300 image across its existing fleet needs to confirm that floor and plan the upgrade window before this switch is staged, rather than assuming the currently deployed image already supports it.

Application Scenarios

Copper Access Wiring Closet

Deployed as the access-layer switch in a floor wiring closet for desktop and workstation connections that do not require PoE, such as office copper drops or lab benches.

Fiber-Aggregated Access With Network Module

Fitted with a C9300-NM-8X or C9300-NM-2Y network module to hand off 10G or 25G fiber uplinks from a wiring closet back to a distribution or core switch.

Segmented Campus Access With VXLAN or TrustSec

Used where the access layer itself must participate in network segmentation, since Network Advantage brings VXLAN, LISP, and Cisco TrustSec down to the access switch rather than only the distribution layer.

Product Comparison

Parameter	C9300-24T-A	C9300-24T-E	C9300-48T-A	C9300-24P-A
Port Count	24x 1G copper, data only	24x 1G copper, data only	48x 1G copper, data only	24x 1G copper, PoE+
Network License	Network Advantage	Network Essentials	Network Advantage	Network Advantage
Uplink	Modular uplink bay	Modular uplink bay	Modular uplink bay	Modular uplink bay
Default Power Supply	PWR-C1-350WAC-P, 350W AC	PWR-C1-350WAC-P, 350W AC	PWR-C1-350WAC-P, 350W AC	PWR-C1-715WAC-P, 715W AC
Default PoE Budget	Not a PoE Switch (Data Only)	Not a PoE Switch (Data Only)	Not a PoE Switch (Data Only)	445W
Switching Capacity	208 Gbps	208 Gbps	256 Gbps	208 Gbps
Forwarding Rate	154.76 Mpps	154.76 Mpps	190.47 Mpps	154.76 Mpps
Stacking	StackWise-480, StackPower	StackWise-480, StackPower	StackWise-480, StackPower	StackWise-480, StackPower

C9300-24T-A and C9300-24T-E run on identical hardware with the same 208 Gbps switching capacity and 350W AC data-only power profile; the license tier is the only real ordering split, and Cisco’s ordering guide does not document an in-place upgrade PID from Network Essentials to Network Advantage on this hardware, so a design that outgrows Layer 2 and basic routed access must be ordered as C9300-24T-A from the start rather than upgraded later.
Choosing C9300-48T-A instead of C9300-24T-A doubles port count to 48 on the same data-only, no-PoE power profile and the same Network Advantage tier; the tradeoff is purely port density, since switching capacity moves from 208 Gbps to 256 Gbps and forwarding rate from 154.76 Mpps to 190.47 Mpps to serve the larger port count, not a different feature set.
Moving to C9300-24P-A instead of C9300-24T-A adds a 445W PoE+ budget on the same 24-port count and Network Advantage tier, at the cost of a larger 715W AC default power supply; a closet with no PoE endpoints has no reason to carry that heavier supply, but any plan to add IP phones or access points later needs the C9300-24P-A form factor instead.
For deciding which SKU to order in this group, settle the PoE requirement first, since only C9300-24P-A differs on power sourcing, then size the port count between C9300-24T-A and C9300-48T-A; the license tier only matters when comparing against C9300-24T-E, because C9300-48T-A and C9300-24P-A already default to Network Advantage in this comparison set.

Selection Guide

1. When Network Essentials Covers The Role

Network Advantage on C9300-24T-A adds VXLAN, Cisco TrustSec, and unrestricted OSPF route scale over the Network Essentials tier carried by the same hardware on C9300-24T-E; a pure Layer 2 access role with no segmentation or advanced routing requirement can take the C9300-24T-E at the lower license tier instead.

2. Network Module Selection Before BOM Lock

C9300-24T-A ships with an empty uplink bay, so the design must pick a network module such as C9300-NM-8X for 10G fiber or C9300-NM-2Q for 40G; leaving the bay unfilled forces a C9300-NM-BLANK cover and no uplink path at all, so the module choice is part of sizing this SKU, not an afterthought.

3. PoE Requirement Changes The Chassis

C9300-24T-A carries no PoE budget on its default 350W supply; a deployment that later needs to power IP phones or access points at the same 24-port count has to move to C9300-24P-A instead, since the data-only chassis cannot be field-upgraded to source PoE.

4. No In-Place License Upgrade Path

Cisco’s ordering guide does not list an in-place upgrade PID that converts a Network Essentials order to Network Advantage on this hardware; a design that might need Advantage-tier segmentation later should order C9300-24T-A up front rather than plan on upgrading a C9300-24T-E after deployment.

Ordering Checklist

Check Item	What to Confirm	Why It Matters
Network module selection	Confirm which uplink module (C9300-NM-8X, C9300-NM-2Q, C9300-NM-4G, C9300-NM-4M, or C9300-NM-2Y) is ordered alongside C9300-24T-A, or that C9300-NM-BLANK is used if none is needed.	Without a module or blank cover, the uplink bay is left open and the required airflow path is not maintained.
Software subscription tier match	Confirm the Cisco Catalyst or Cisco DNA subscription ordered is Advantage tier, matching the Network Advantage hardware license.	A mismatched Essentials subscription against Advantage hardware license does not align with Cisco’s ordering structure.
Smart Account binding	Confirm the target Smart Account and Virtual Account are set before the order is placed.	Entitlements are recorded in Cisco Smart Software Manager and cannot activate correctly against the wrong account.
Second power supply need	Confirm whether a second PWR-C1-350WAC-P, PWR-C1-715WAC-P, or PWR-C1-1100WAC-P is required for supply redundancy.	The chassis ships with only one supply installed; the second slot needs either a supply or a blank to maintain thermal design.
Stack partner license tier	Confirm any additional stack members share the same Network Advantage license tier.	StackWise-480 stacking is only supported among C9300 members on the same license tier.

Optional Add-ons

Add-on	Cisco PID	Purpose
Uplink Network Module	C9300-NM-8X	8x 10G/1G SFP+ modular uplink module
Uplink Network Module	C9300-NM-2Q	2x 40G QSFP+ modular uplink module
Uplink Network Module	C9300-NM-2Y	2x 25G/10G/1G SFP28 modular uplink module
Uplink Network Module	C9300-NM-4G	4x 1G SFP modular uplink module
Uplink Network Module	C9300-NM-4M	4x Multigigabit modular uplink module
Second Power Supply	PWR-C1-715WAC-P	715W AC redundant/replacement power supply
Second Power Supply	PWR-C1-1100WAC-P	1100W AC redundant/replacement power supply
Stacking Cable	STACK-T1-1M	1m StackWise stacking cable
Stacking Cable	STACK-T1-3M	3m StackWise stacking cable

Switch Rear Panel

The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.

1	Ground connectors	7	StackPower connectors
2	USB3.0–SSD port	8	AC OK (input) status LED
3	BEACON LED	9	PS OK (output) status LED
4	CONSOLE (RJ-45 console port)	10	StackWise-480 port connectors
5	MGMT (RJ-45 10/100/1000 management port)	11	Power supply modules
6	Fan modules	–	–

Rear Panel of a Cisco Catalyst 9300 Series Switch

Components Delivered in the Shipping Box

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

1	Cisco Catalyst 9300 Series switch with optional network module¹ (power supply and fan modules not shown)	9	Eight number-8 Phillips flat-head screws
2	AC power cord	10	Cable guide
3	Product documentation and compliance document	11	M4.0 x 20mm Phillips pan-head screw
4	Four rubber mounting feet	12	(Optional) RJ-45 console cable
5	Ground lug screw and ring terminal	13	(Optional) USB console cable
6	Two 19-inch mounting brackets	14	(Optional) StackWise-480/1T cable (0.5-meter, 1-meter, or 3-meter)
7	Four number-12 pan-head screws	15	(Optional) StackPower cable (0.3-meter or 1.5-meter)
8	Four number-10 pan-head screws	16	(Optional) StackWise-320 cable

Specifications

Parameter	Specification	Parameter	Specification
Product ID	C9300-24T-A	Network License	Network Advantage
Port Count	24x 10/100/1000 copper, data only	PoE Budget	Not a PoE Switch (Data Only)
Uplink	Modular uplink bay (module ordered separately)	Compatible Network Modules	C9300-NM-4G, C9300-NM-4M, C9300-NM-8X, C9300-NM-2Q, C9300-NM-2Y
Switching Capacity	208 Gbps	Stacked Switching Capacity	688 Gbps (StackWise-480, 8 members)
Forwarding Rate	154.76 Mpps	Stacked Forwarding Rate	511.90 Mpps
Stacking	StackWise-480, up to 8 members	StackPower	Supported
MAC Address Table	32,000 entries	IPv4 Routes	32,000 (24,000 connected + 8,000 indirect)
IPv6 Routes	16,000 entries	Multicast Routes	8,000 entries
QoS Entries	5,120	ACL Entries	5,120
DRAM / Flash	8 GB / 16 GB	VLAN IDs	4094
SVI Total	1000	Jumbo Frame Size	9198 bytes
Default Power Supply	PWR-C1-350WAC-P, 350W AC	Optional Second Power Supply	PWR-C1-715WAC-P (715W) or PWR-C1-1100WAC-P (1100W)
Power Supply Input	100-240VAC 47-63Hz, IEC 320-C14	Power Supply Output (BTU/hr)	1194 BTU/hr (350W supply)
Fan Modules	3x field-replaceable, N+1 redundant, FAN-T2=	Fan Airflow	20 cfm
Chassis Dimensions (H x W x D)	1.73 x 17.5 x 17.7 in (with default supply)	Weight	16.03 lb (7.27 kg)
Operating Temperature	-5 to 45 C (up to 1500m)	Storage Temperature	-40 to 70 C
Operating Humidity	5%-90% non-condensing	Operating Altitude	Up to 10,000 ft (3000m)
Acoustic Noise	45 dB LpA typical / 48 dB LpA max	MTBF	314,790 hours
Management Ports	10/100/1000 Ethernet mgmt, RJ-45 console, USB mini-Type B console	USB / SSD Support	USB Type A 128MB-8GB flash; rear USB 3.0 SSD bay 120GB/240GB
Connector Types	RJ-45 (1000BASE-T, Cat 5E UTP)	Minimum Software Release	Cisco IOS XE Release 16.5.1a
Safety Certifications	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1	EMC Certifications	FCC Part 15, EN 55032 Class A, CISPR 32 Class A, ICES-003 Class A
Environmental Compliance	RoHS 5	Warranty	Cisco Enhanced Limited Lifetime Warranty (E-LLW)

Get More Information

Need pricing, stock, or shipping details for the C9300-24T-A ? Layer23-Switch can help you check current availability, lead time, and delivery options for this. Send us the part number, quantity, and destination country via live chat or email sales@layer23-switch.com for a fast quotation.

Quality Certifications

Customer Reviews

Write A Review

4.9

Rated 4.94 out of 5

(16 reviews)

5 Stars

4 Stars

3 Stars

2 Stars

1 Stars

Lori Ross

Posted on 01/03/2026

Verified Buyer

Rated 5 out of 5

5.0

Our installation runbook applied without exception or modification.

Jordan Hernandez

Posted on 24/02/2026

Verified Buyer

Rated 5 out of 5

5.0

Looked it up in the supplier database. Listed as a current production unit.

Roger Johansson

Posted on 14/01/2026

Verified Buyer

Rated 5 out of 5

5.0

We’ve come back so many times we’re on a first-name basis with their team.

David Kim

Posted on 20/07/2025

Verified Buyer

Rated 5 out of 5

5.0

Genuine Cisco. We scanned the serial numbers and everything is authentic. Trustworthy seller.

Leo

Posted on 21/05/2025

Rated 5 out of 5

5.0

Good

Questions & Answers

What is Cisco C9300-24T-A used for?
Cisco C9300-24T-A is used for 24-port Gigabit copper access where endpoints have their own power and the switch needs modular uplinks plus Network Advantage licensing. It fits wiring closets that need stronger Layer 3 and policy capability without paying for unused PoE hardware.
Does C9300-24T-A support PoE?
No. C9300-24T-A is a data-only 24-port RJ-45 switch and does not provide PoE to phones, cameras, or access points. If endpoint power is required, compare it with C9300-24P-A or C9300-24U-A.
How is C9300-24T-A different from C9300-24T-E?
C9300-24T-A and C9300-24T-E share the same 24-port data-only hardware profile, but C9300-24T-A ships with Network Advantage while C9300-24T-E ships with Network Essentials. Choose the A SKU when advanced routing or policy features are required from the start.
What uplink options can C9300-24T-A use?
C9300-24T-A uses Catalyst 9300 modular uplink network modules, so uplink choices can include 1G, 10G, 25G, 40G, or multigigabit options depending on the installed module. That flexibility is a key reason to choose this model over fixed-uplink switches.
Can C9300-24T-A be stacked?
Yes. C9300-24T-A supports StackWise-480 and StackPower, making it suitable for access stacks that need simplified management and power resiliency. Stack planning should keep the models, software release, and uplink modules consistent.
Is C9300-24T-A a good switch for routed access?
Yes. C9300-24T-A is a stronger routed-access choice than the E version because Network Advantage enables more Layer 3 and policy capability. It is useful when the access layer participates in more than basic Layer 2 switching.
What power supply is typical for C9300-24T-A?
C9300-24T-A is commonly ordered with a 350W AC power supply because it does not reserve power for PoE endpoints. Buyers planning redundant power should verify the second power supply and StackPower design separately.
When is C9300-24T-A not the best choice?
C9300-24T-A is not the best choice when the closet needs PoE, 48 copper ports, multigigabit access, or a lower software tier. C9300-24P-A, C9300-48T-A, C9300-24UX-A, or C9300-24T-E may fit those cases better.

Warranty

100% Low Price Guarantee:

Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.

100% Quality Assurance:

All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.

Free CCIE Technical Support:

Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.

100% Money Back Guarantee:

If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.

Flexible & Secure Payment and Shipping:

We support multiple secure payment and logistics options, backed by industry-leading verification:

Visit How to Pay page for more information

Warranty Coverage & RMA Instructions

Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information

Check lifecycle dates

FREE NETWORK TOOLS

Verify, plan, and comparewith confidence

Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Cisco Serial Number Lookup

Verify authenticity and identify exactmodel, coverage, and lifecycle detailsusing a Cisco serial number.

Verify a serial number >

Product Comparison

Compare specifications, capabilitiesand form factors side-by-side tochoose the right hardware.

Cisco Compare products >

Standard Services

Personalized Service, Superior Product Maintenance for Ultimate Satisfaction.

Projects and Technical Support
Easy Purchasing Supply
Product Lifecycle Protection
Exclusive F3 Team Support

Customized Support for Your Needs with CCIE, HCIE, HPE ASE, etc.

Shipping

C9300-24T-A – 24x1G Data Ports – Modular Uplink – Network Advantage

Cisco C9300-24T-A Compatible Accessories, Modules & Spare Parts

C9300-24T-A Description

Quick Specs

Product Performance

Key Features

Application Scenarios

Product Comparison

Selection Guide

1. When Network Essentials Covers The Role

2. Network Module Selection Before BOM Lock

3. PoE Requirement Changes The Chassis

4. No In-Place License Upgrade Path

Ordering Checklist

Optional Add-ons

Switch Rear Panel

Components Delivered in the Shipping Box

Specifications

Get More Information

Quality Certifications

Customer Reviews

Questions & Answers

What is Cisco C9300-24T-A used for?

Does C9300-24T-A support PoE?

How is C9300-24T-A different from C9300-24T-E?

What uplink options can C9300-24T-A use?

Can C9300-24T-A be stacked?

Is C9300-24T-A a good switch for routed access?

What power supply is typical for C9300-24T-A?

When is C9300-24T-A not the best choice?

Warranty

Verify, plan, and comparewith confidence

Cisco Serial Number Lookup

Product Comparison

Standard Services

DataSheet Downloads

Related Searches of Catalyst 9300 Switches