Can C9300-24P-E be stacked?

Yes. C9300-24P-E stacks over StackWise-480 at 480 Gbps with up to 8 members. Members must be modular-uplink Catalyst 9300 switches at the same license level, and a 50 cm StackWise cable is added by default.

What does Network Essentials on C9300-24P-E include?

Network Essentials on C9300-24P-E provides Layer 2 and routed access with OSPF up to 1,000 routes, plus MACsec-128. BGP, IS-IS, VXLAN and MPLS are not included. The license is perpetual and included with the hardware, and new orders need a subscription of the same tier.

How much power does C9300-24P-E draw with no PoE load?

With a PWR-C1-715WAC-P supply, a C9300-NM-8X module and 115 VAC input, C9300-24P-E draws 107.1W at full port traffic and 100.7W at half port traffic. The weighted average is 99W, and the switch draws 85.8W with no link. These are the measured figures in the Catalyst 9300 data sheet.

Do PoE+ endpoints on C9300-24P-E stay powered during a reload?

Perpetual PoE keeps endpoints powered through a soft reload, such as an upgrade, a crash or a manual reboot, and across a stack. It does not cover a power loss or hibernation. Fast PoE restores power in under 30 s from stored power and needs perpetual-poe-ha configured on the port.

Does a Network Essentials subscription for C9300-24P-E include ThousandEyes?

No. ThousandEyes Network and Application Synthetics (TE-EMBEDDED-T) is bundled only with 3, 5 or 7-year Cisco Catalyst or Cisco DNA Advantage subscriptions on Catalyst 9300 switches, not with Essentials. A C9300-24P-E buyer who wants it needs the Advantage tier, so decide this when the license is quoted.

How much power does a PoE+ device receive from a port on C9300-24P-E?

A PoE+ port on C9300-24P-E follows IEEE 802.3at Type 2 and sources 30W, so a powered device receives up to 25.5W after cable loss. An 802.3af Type 1 device receives 13W from a 15.4W source. Check endpoint specifications against the device figure, not the port rating.

What is the default packet buffer and NetFlow capacity of C9300-24P-E?

C9300-24P-E has a 16-MB packet buffer and 64,000 Flexible NetFlow flows. The same Catalyst 9300 group lists 8 GB of DRAM and 16 GB of flash. Network Essentials limits routed scale separately, because OSPF stops at 1000 routes regardless of the hardware table size.

How are the 24 PoE+ ports of C9300-24P-E connected to the ASIC?

C9300-24P-E uses one two-core UADP 2.0 ASIC with 8MB of buffer per core, and its 1G PHY groups cover 8 ports each. The uplink module connects over 10Gx4 or 40Gx1 lanes per cage, and StackWise-480 hangs off the same ASIC.

C9300-24P-E – 24x1G PoE+ Ports – Modular Uplink – 445W PoE Budget – Network Essentials

Name: C9300-24P-E - Cisco Catalyst 9300 24-Port PoE+ Access Switch, Network Essentials
Brand: Cisco
SKU: C9300-24P-E
Price: 2054.35 USD
Availability: InStock
Rating: 4.75 (12 reviews)

Brand: Cisco Category: Catalyst 9300 Switches Availability:

In Stock

Model: C9300-24P-E

Cisco SN CheckSN verification before shipment.Verify authenticity3-Year WarrantyExtended, enterprise-gradeWarranty terms14-Day ReturnsStraightforward RMA processReturn policy

Rated 4.75 out of 5 based on 12 customer ratings

4.812 reviews8 Questions4 sold this month

List Price: ~~$8,933.01~~ 77% OFF

$2,054.35

Price Alert

Condition

Related

Subscription C9300-DNA-E + $450.95 Subtotal Price $2,505.30

Quantity

Shipping Express Shipping 2-6 Business Days, via UPS, FedEx, DHL and more

Trusted & Secure Payments

Shop Expert-Recommended Accessories for the C9300-24P-E

Explore optics, stacking accessories, modules, and power supplies—all verified by our engineers for use with this model.

SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMF
Original price was: $853.95.Current price is: $52.00.
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4
Original price was: $1,213.85.Current price is: $91.68.
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMF
Original price was: $2,439.88.Current price is: $150.00.
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km Reach
Original price was: $4,873.66.Current price is: $149.00.
SFP-25G-SR-S
25GBASE-SR SFP28 - 850nm MMF - 100m OM4
Original price was: $1,213.85.Current price is: $258.00.
SFP-10/25G-LR-S
10/25GBASE-LR SFP28 - 10 km G.652 SMF - 0 to 70°C Commercial Temperature
Original price was: $2,787.19.Current price is: $431.00.
QSFP-40G-SR4
40G SR4 QSFP - MPO-12 MMF - 4x10G Breakout
Original price was: $3,653.72.Current price is: $126.00.
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOM
Original price was: $1,260.58.Current price is: $95.80.
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m Reach
Original price was: $570.10.Current price is: $70.00.
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOM
Original price was: $633.46.Current price is: $59.00.
STACK-T1-50CM
50cm Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $121.99.Current price is: $90.00.
STACK-T1-1M
1m Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $252.03.Current price is: $140.00.
STACK-T1-3M
3m Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $378.07.Current price is: $257.00.
C9300-NM-2Y
2x25G/10G/1G SFP28 Ports - Catalyst 9300 Module
Original price was: $3,227.37.Current price is: $1,122.00.
C9300-NM-2Q
2x40G QSFP+ Uplinks - Catalyst 9300 Module
Original price was: $3,213.50.Current price is: $800.00.
C9300-NM-4G
4x1GE SFP Ports - Catalyst 9300 Module
Original price was: $680.51.Current price is: $231.00.
C9300-NM-4M
4x10G/mGig Copper Ports - Catalyst 9300 Module
Original price was: $1,890.30.Current price is: $626.00.
C9300-NM-8X
8x10G/1G SFP+ Uplinks - Network Module - Catalyst 9300
Original price was: $3,213.50.Current price is: $761.00.
PWR-C1-715WAC-P
715W AC PSU - Catalyst 9300 C1 - Platinum Rated
Original price was: $1,479.00.Current price is: $403.00.
PWR-C1-1100WAC-P
1100W AC PSU - Catalyst 9300 C1 - Platinum Rated
Original price was: $2,317.88.Current price is: $689.00.

Why Layer23-Switch

Stocked, Shipped and Supported by One Team

Founded

Customers

Units shipped

Countries

Inventory You Can See

Cisco stock on hand

Models ready to ship

Warehouse space

Ships in 1 Business Day

In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.

DHL FedEx UPS Duties included: US · CA · UK

LSCare Warranty

3years on enterprise equipment

Advance replacement for in-stock models
New unit for dead-on-arrival
14-day returns on sealed items

Free CCIE Support

Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.

Part number check Configuration Troubleshooting

Verify Before You Pay

100%factory-sealed

Get label and serial photos before shipment, and check every serial number with Cisco.

C9300-24P-E Description

The C9300-24P-E is a Cisco Catalyst 9300 Series stackable access switch for campus wiring closets that power PoE+ endpoints such as phones and access points. The switch has 24 10/100/1000 PoE+ ports on a 445W default PoE budget, a modular uplink slot, 208 Gbps of switching capacity and the Network Essentials license. That tier supports OSPF up to 1,000 routes but not BGP, VXLAN or MPLS.

Quick Specs

Parameter	Specification
Product ID	C9300-24P-E
Downlink ports	24 x 10/100/1000 Mbps RJ-45
PoE	PoE+, up to 30W per port
Default PoE budget	445W
PoE budget with second supply	720W with any 350W to 1900W second supply
Default power supply	PWR-C1-715WAC-P (715W AC)
Uplinks	Modular slot for Catalyst 9300 network modules; no module in the hardware SKU
Network license	Network Essentials
Switching capacity	208 Gbps (688 Gbps with stacking)
Forwarding rate	154.76 Mpps (511.90 Mpps with stacking)
Stacking	StackWise-480 at 480 Gbps, up to 8 members
StackPower	Supported
Minimum software release	Cisco IOS XE Everest 16.5.1a

Product Performance

Switching Capacity

Forwarding Rate

Default PoE Budget

Key Features

Shared 445W PoE+ Budget

All 24 PoE+ ports draw from 445W on the 715W supply, about 18.5W per port at full use. A second supply raises the budget to 720W, enough for 30W on every port.

Network Essentials Scope

The tier provides Layer 2 and routed access with OSPF up to 1,000 routes and MACsec-128. BGP, IS-IS, VXLAN and MPLS need the Advantage tier.

Uplink Speed Set By The Module

The uplink slot ships empty and takes Catalyst 9300 network modules, so uplink speed depends on the module installed rather than on the switch.

Application Scenarios

Office Floor Phones And Wi-Fi

On an office floor, the switch powers IP phones and Wi-Fi access points from its PoE+ ports and carries their traffic to the distribution layer through the uplink module.

Branch Office Access Stack

A branch office that outgrows a single switch can add members to a StackWise-480 stack, which links up to eight units at 480 Gbps.

Camera And Badge Reader Closet

In a school or warehouse wiring closet, the switch powers IP cameras and badge readers from PoE+ ports within its 445W default budget.

Product Comparison

Parameter	C9300-24P-E	C9300-24P-A	C9300-24S-E	C9300-24U-E
Total 10/100/1000, Multigigabit copper or SFP fiber	24x 10/100/1000	24x 10/100/1000	24x 1G SFP	24x 10/100/1000
PoE type	PoE+ (30W per port)	PoE+ (30W per port)	No PoE	Cisco UPOE (60W per port)
Available PoE power with default PS	445W	445W	No PoE	830W
Available PoE power with secondary PS	720W	720W	No PoE	1440W
Uplink configuration	Modular uplinks	Modular uplinks	Modular uplinks	Modular uplinks
Network license	Network Essentials	Network Advantage	Network Essentials	Network Essentials
Stacking bandwidth support	StackWise-480	StackWise-480	StackWise-480	StackWise-480
Switching capacity	208 Gbps	208 Gbps	208 Gbps	208 Gbps
Depth with default power supply	17.7 in	17.7 in	19.2 in	19.2 in

C9300-24P-E is the copper PoE+ model of this group: its 24 RJ-45 ports share 445W on the 715W supply, while C9300-24S-E puts 24 1G SFP fiber ports on the same supply with no PoE. Powered devices that draw up to 60W need C9300-24U-E, which supplies UPOE from an 830W budget on an 1100W supply and sits 1.5 in deeper. Sites that need BGP, IS-IS, VXLAN, MPLS or MACsec-256 at turn-up should order C9300-24P-A, or upgrade this switch later with a C9300-LIC= term (C9300-24-E-A-3, -5 or -7), which cannot be placed on the switch order. A stack accepts new members only at its current license level.

PoE Power Planning

Planning Item	Value or Check
Port power class	PoE+, up to 30W per port on all 24 ports
Default PoE budget	445W on the PWR-C1-715WAC-P supply
Full PoE+ load	24 x 30W = 720W, which is 275W above the default budget
Budget with a second supply	720W with a 350W, 715W, 1100W or 1900W second supply
Budget with an 1100W primary	720W through PWR-C1-1100WAC-UP, with or without a second supply
Budget ceiling	720W is set by 24 ports at 30W; no supply combination raises it further
Configurator default	A second supply matching the primary is added unless C9300-SPS-NONE is selected
StackPower	A member on a StackPower ring can run on supplies in the other switches
Endpoint check	Count devices by PoE class and add their maximum draw before settling on 445W or 720W

Ordering Checklist

Subscription tier and term: Select a 24-port Essentials term of 3, 5 or 7 years, such as C9300-DNA-E-24-5Y for Cisco DNA or C9300-DNX-E-24-5Y for Cisco Catalyst. New orders need a subscription of the same tier as the built-in Network Essentials license.
Smart Account: Name the Smart Account and virtual account that will hold the licenses. A Smart Account is mandatory on every Catalyst 9300 order.
Uplink module: The configurator adds C9300-NM-8X by default; keep it, pick another Catalyst 9300 module, or select C9300-NM-NONE. The uplink slot must hold a module or a blank.
Second power supply: A second PWR-C1-715WAC-P is added by default; C9300-SPS-NONE removes it. Without it the PoE budget stays at 445W instead of 720W.
Stack cables: A 50 cm StackWise cable and a 30 cm StackPower cable are added by default; C9300-STACK-NONE and C9300-SPWR-NONE remove them. A standalone switch otherwise receives cables it never uses.
Power cords: Select the cord type for the destination country; two cords ship with the default configuration. The configurator defaults to North America cords.

Optional Add-ons

Model	Description
C9300-NM-4G	Catalyst 9300 network module with 4 x 1G SFP ports
C9300-NM-4M	Catalyst 9300 network module with 4 x 10G/Multigigabit copper ports
C9300-NM-8X	Catalyst 9300 network module with 8 x 10G/1G SFP+ ports
C9300-NM-2Q	Catalyst 9300 network module with 2 x 40G QSFP+ ports
C9300-NM-2Y	Catalyst 9300 network module with 2 x 25G/10G/1G SFP28 ports
PWR-C1-715WAC-P=	Spare 715W AC Platinum-rated power supply, matching the default supply
PWR-C1-1100WAC-P=	Spare 1100W AC Platinum-rated power supply
PWR-C1-1100WAC-UP	Upgrade of the default supply to an 1100W AC Platinum-rated power supply
FAN-T2=	Spare fan module
STACK-T1-50CM=	StackWise-480/1T stacking cable, 50 cm
STACK-T1-1M=	StackWise-480/1T stacking cable, 1 m
STACK-T1-3M=	StackWise-480/1T stacking cable, 3 m
CAB-SPWR-30CM=	StackPower cable, 30 cm
CAB-SPWR-150CM=	StackPower cable, 150 cm
SSD-120G	Pluggable USB 3.0 SSD storage, 120 GB
SSD-240G	Pluggable USB 3.0 SSD storage, 240 GB
C9300-LIC=	Essentials-to-Advantage upgrade license; 24-port terms C9300-24-E-A-3, C9300-24-E-A-5 and C9300-24-E-A-7, ordered after the switch

Specifications

Parameter	Specification	Parameter	Specification
Product ID	C9300-24P-E	Network license	Network Essentials, perpetual and included with the hardware
Downlink ports	24 x 10/100/1000 Mbps RJ-45	PoE	PoE+, up to 30W per port
Default power supply	PWR-C1-715WAC-P (715W AC, Platinum-rated)	Default PoE budget	445W
PoE budget with second supply	720W with a 350W, 715W, 1100W or 1900W second supply	PoE budget with 1100W primary supply	720W, with or without a second supply
Power supply slots	2; one supply installed, blank in the second bay	Power supply redundancy	Dual redundant power supplies supported
Power supply input	100-240 VAC, 50-60 Hz, 10-5 A (PWR-C1-715WAC-P)	Power supply heat dissipation	2,440 BTU/hr output (PWR-C1-715WAC-P)
Uplink slot	Modular slot for Catalyst 9300 network modules; no module in the hardware SKU	Supported network modules	C9300-NM-4G, C9300-NM-4M, C9300-NM-8X, C9300-NM-2Q, C9300-NM-2Y; Catalyst 3850 network modules
Network module slot rule	Operate with a network module or a blank installed	Management port	10/100/1000 RJ-45
Console port	RJ-45 console port and USB mini-Type B console port	USB port	USB Type A, USB 3.0, 900 mA at 5 V
SSD storage	Pluggable 120 GB or 240 GB USB 3.0 SSD module	Switching capacity	208 Gbps
Switching capacity with stacking	688 Gbps	Forwarding rate	154.76 Mpps
Forwarding rate with stacking	511.90 Mpps	Packet buffer	16 MB
Flexible NetFlow entries	64,000 flows	DRAM	8 GB
Flash	16 GB	MAC addresses	32,000
IPv4 routes	32,000 (24,000 direct routes, 8,000 indirect routes)	IPv6 routes	16,000
Multicast routes	8,000	QoS entries	5,120
ACL entries	5,120	VLAN IDs	4094
PVST instances	300	STP virtual ports for PVST	13,000
STP virtual ports for MST	13,000	Switched virtual interfaces	1,000
Jumbo frames	9198 bytes	Total routed ports per stack	448
Stacking	StackWise-480, 480 Gbps, up to 8 members	Stack membership	Modular-uplink Catalyst 9300 switches at the same license level; higher-scale C9300-24UB, C9300-24UXB and C9300-48UB cannot join
StackPower	Supported; up to 4 switches per ring, up to 8 with XPS-2200	Network Essentials feature set	Layer 2; RIP, EIGRP Stub and OSPF up to 1,000 routes; PBR; PIM Stub multicast; PVLAN; VRRP; QoS; 802.1X; MACsec-128; CoPP; SXP; SSO
Fan modules	3 field-replaceable fans with N+1 redundancy (FAN-T2=)	Fan module airflow	20 cfm
Measured power, full port traffic	107.1W (715W Platinum supply, C9300-NM-8X, 115 VAC)	Measured power, weighted average	99W (715W Platinum supply, C9300-NM-8X, 115 VAC)
Measured power, 100% PoE load	568.4W (715W Platinum supply, C9300-NM-8X, 115 VAC)	Operating temperature	-5°C to +45°C up to 5000 ft (1500 m); -5°C to +40°C up to 10,000 ft (3000 m); -5°C to +35°C up to 15,000 ft
Storage temperature	-40°C to +70°C	Operating humidity	5% to 90%, noncondensing
Acoustic noise	LpA 45 dB typical, 48 dB max; LwA 5.6B typical, 5.9B max (AC supply, 24 PoE+ ports loaded, 25°C)	Dimensions, chassis only (H x W x D)	1.73 x 17.5 x 16.1 in (4.4 x 44.5 x 40.9 cm)
Dimensions with default power supply (H x W x D)	1.73 x 17.5 x 17.7 in (4.4 x 44.5 x 44.9 cm)	Dimensions with 1100W power supply (H x W x D)	1.73 x 17.5 x 19.2 in (4.4 x 44.5 x 48.8 cm)
Weight	7.4 kg (16.33 lb)	Safety certifications	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
EMC certifications	47 CFR Part 15, EN 55032 Class A, CISPR 32 Class A, EN 55035, CISPR 35, EN 300 386, EN 61000-3-2, EN 61000-3-3, ICES-003 Class A, CNS13438, KN32, KN35, TCVN 7189 Class A, TCVN 7317	Environmental compliance	RoHS 5
IEEE standards	802.1D, 802.1p, 802.1Q, 802.1s, 802.1w, 802.1x, 802.3, 802.3u, 802.3ab, 802.3z, 802.3ad, 802.3ae, 802.3af, 802.3at	Management standards	SNMPv1, SNMPv2c, SNMPv3, RMON I and II
Copper port cabling	RJ-45, 4-pair Cat 5E UTP (1000BASE-T)	Minimum software release	Cisco IOS XE Everest 16.5.1a
MTBF	299,000 hours

Quality Certifications

Customer Reviews

Write A Review

4.8

Rated 4.75 out of 5

(12 reviews)

5 Stars

4 Stars

3 Stars

2 Stars

1 Stars

Megan Chen

Posted on 29/04/2026

Verified Buyer

Rated 4 out of 5

4.0

Delivery to our campus was right on schedule. Took a little longer to clear customs than expected, otherwise excellent.

Danny Tucker

Posted on 03/01/2026

Verified Buyer

Rated 4 out of 5

4.0

Layer23 sets the gold standard for what alternative-channel buying should feel like. Wish the lead time was a bit shorter, but product quality made up for it.

Charlotte Davis

Posted on 14/12/2025

Verified Buyer

Rated 5 out of 5

5.0

Walked through the order details carefully to confirm everything before processing.

Chris Evans

Posted on 08/07/2025

Verified Buyer

Rated 5 out of 5

5.0

Security seals intact. Authentic equipment. Good job.

Tony Stark

Posted on 30/05/2025

Verified Buyer

Rated 5 out of 5

5.0

Fastest delivery I’ve seen. Logistics team is on point.

Questions & Answers

Can C9300-24P-E be stacked?
Yes. C9300-24P-E stacks over StackWise-480 at 480 Gbps with up to 8 members. Members must be modular-uplink Catalyst 9300 switches at the same license level, and a 50 cm StackWise cable is added by default.
What does Network Essentials on C9300-24P-E include?
Network Essentials on C9300-24P-E provides Layer 2 and routed access with OSPF up to 1,000 routes, plus MACsec-128. BGP, IS-IS, VXLAN and MPLS are not included. The license is perpetual and included with the hardware, and new orders need a subscription of the same tier.
How much power does C9300-24P-E draw with no PoE load?
With a PWR-C1-715WAC-P supply, a C9300-NM-8X module and 115 VAC input, C9300-24P-E draws 107.1W at full port traffic and 100.7W at half port traffic. The weighted average is 99W, and the switch draws 85.8W with no link. These are the measured figures in the Catalyst 9300 data sheet.
Do PoE+ endpoints on C9300-24P-E stay powered during a reload?
Perpetual PoE keeps endpoints powered through a soft reload, such as an upgrade, a crash or a manual reboot, and across a stack. It does not cover a power loss or hibernation. Fast PoE restores power in under 30 s from stored power and needs perpetual-poe-ha configured on the port.
Does a Network Essentials subscription for C9300-24P-E include ThousandEyes?
No. ThousandEyes Network and Application Synthetics (TE-EMBEDDED-T) is bundled only with 3, 5 or 7-year Cisco Catalyst or Cisco DNA Advantage subscriptions on Catalyst 9300 switches, not with Essentials. A C9300-24P-E buyer who wants it needs the Advantage tier, so decide this when the license is quoted.
How much power does a PoE+ device receive from a port on C9300-24P-E?
A PoE+ port on C9300-24P-E follows IEEE 802.3at Type 2 and sources 30W, so a powered device receives up to 25.5W after cable loss. An 802.3af Type 1 device receives 13W from a 15.4W source. Check endpoint specifications against the device figure, not the port rating.
What is the default packet buffer and NetFlow capacity of C9300-24P-E?
C9300-24P-E has a 16-MB packet buffer and 64,000 Flexible NetFlow flows. The same Catalyst 9300 group lists 8 GB of DRAM and 16 GB of flash. Network Essentials limits routed scale separately, because OSPF stops at 1000 routes regardless of the hardware table size.
How are the 24 PoE+ ports of C9300-24P-E connected to the ASIC?
C9300-24P-E uses one two-core UADP 2.0 ASIC with 8MB of buffer per core, and its 1G PHY groups cover 8 ports each. The uplink module connects over 10Gx4 or 40Gx1 lanes per cage, and StackWise-480 hangs off the same ASIC.

Warranty

100% Low Price Guarantee:

Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.

100% Quality Assurance:

All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.

Free CCIE Technical Support:

Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.

100% Money Back Guarantee:

If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.

Flexible & Secure Payment and Shipping:

We support multiple secure payment and logistics options, backed by industry-leading verification:

Visit How to Pay page for more information

Warranty Coverage & RMA Instructions

Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information

FREE NETWORK TOOLS

Verify, plan, and comparewith confidence

Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Check lifecycle dates

Cisco Switch Selector Tool

Filter Cisco switches by ports, uplinks, PoE, performance, features, license, and budget.

Find matching switches >

Cisco Serial Number Lookup

Verify authenticity and identify exactmodel, coverage, and lifecycle detailsusing a Cisco serial number.

Verify a serial number >

Product Comparison

Compare specifications, capabilitiesand form factors side-by-side tochoose the right hardware.

Cisco Compare products >

Item	Qty	Amount
C9300-24P-ENew, factory-sealed · 3-year warranty · In stock
C9300-DNA-ERequired with each C9300-24P-E

C9300-24P-E – 24x1G PoE+ Ports – Modular Uplink – 445W PoE Budget – Network Essentials

Shop Expert-Recommended Accessories for the C9300-24P-E

Stocked, Shipped and Supported by One Team

Inventory You Can See

Ships in 1 Business Day

LSCare Warranty

Free CCIE Support

Verify Before You Pay

C9300-24P-E Description

Quick Specs

Product Performance

Key Features

Application Scenarios

Product Comparison

PoE Power Planning

Ordering Checklist

Optional Add-ons

Specifications

Quality Certifications

Customer Reviews

Questions & Answers

Can C9300-24P-E be stacked?

What does Network Essentials on C9300-24P-E include?

How much power does C9300-24P-E draw with no PoE load?

Do PoE+ endpoints on C9300-24P-E stay powered during a reload?

Does a Network Essentials subscription for C9300-24P-E include ThousandEyes?

How much power does a PoE+ device receive from a port on C9300-24P-E?

What is the default packet buffer and NetFlow capacity of C9300-24P-E?

How are the 24 PoE+ ports of C9300-24P-E connected to the ASIC?

Warranty

Verify, plan, and comparewith confidence

Cisco Switch Selector Tool

Cisco Serial Number Lookup

Product Comparison

DataSheet Downloads

Related Searches of Catalyst 9300 Switches