Can C9300-24UXB-E be stacked?

Yes, but only with other higher-scale Catalyst 9300 models. C9300-24UXB-E stacks up to eight members over StackWise-480, and standard C9300 switches cannot join the stack. StackPower is supported across the stacked members.

What does Network Essentials on C9300-24UXB-E include?

Network Essentials on C9300-24UXB-E covers Layer 2 and OSPF routed access. VRF, VXLAN, TrustSec, BGP and MACsec-256 are not part of this tier. The -E suffix carries this tier on the switch.

Can the secondary supply in C9300-24UXB-E be the 1900W model?

Yes. PWR-C1-1900WAC-P is orderable on modular-uplink Catalyst 9300 switches and mixes with the other supplies, including the default PWR-C1-1100WAC-P. It delivers 1500W when fed at 115V and 1900W when fed at 230V, and it needs its own power cord, so check the cord type on the quote.

Is ThousandEyes bundled with an Essentials subscription for C9300-24UXB-E?

No. TE-EMBEDDED-T, the ThousandEyes Network and Application Synthetics license, ships by default only with 3, 5 or 7-year Cisco Catalyst or Cisco DNA Advantage subscriptions. A Network Essentials subscription for C9300-24UXB-E does not include it, so an Advantage tier is needed to get it.

How long do PoE endpoints on C9300-24UXB-E stay dark after a reboot?

Under 30 seconds when Fast PoE is set. Perpetual PoE covers an upgrade reload, a crash and a manual reboot, in a stack as well. Fast PoE restores endpoint power in under 30 seconds from stored power and needs perpetual-poe-ha on the port. Power loss and hibernation are not covered.

How many shared-power members can a StackPower ring hold when C9300-24UXB-E is one of them?

A StackPower ring supports up to four members sharing power. Adding the XPS 2200 expandable power system lets up to eight members share power. The ring cables are CAB-SPWR-30CM and CAB-SPWR-150CM. Fixed-uplink C9300L and C9300LM switches have no StackPower, so a C9300-24UXB-E stack stays on modular-uplink members.

Which license tier must the other stack members of C9300-24UXB-E run?

They must run the same license tier, Network Essentials, and the same IOS XE release as C9300-24UXB-E. Mixing an Advantage member into the stack is not allowed. All members use SSO and NSF, and only higher-scale models can be added, up to eight switches in one stack.

What QoS and ACL entry counts does C9300-24UXB-E support?

C9300-24UXB-E belongs to the higher-scale group, so it holds 18,000 security ACL entries and 18,000 QoS entries. Standard Catalyst 9300 switches hold 5,120 of each. These counts do not change between Network Essentials and Network Advantage, and NetFlow reaches 256,000 on this 24-port mGig model.

C9300-24UXB-E – 24x10G mGig UPOE Ports – Higher-Scale Buffer – 560W PoE Budget

Name: C9300-24UXB-E - Cisco 24-Port 10G mGig UPOE Network Essentials Switch
Brand: Cisco
SKU: C9300-24UXB-E
Price: 5091.46 USD
Availability: InStock
Rating: 4.92 (13 reviews)

Brand: Cisco Category: Catalyst 9300 Switches Model: C9300-24UXB-E

Rated 4.92 out of 5 based on 13 customer ratings

4.913 reviews8 Questions7 sold this month

List Price: ~~$24,876.35~~ 80% OFF

$5,091.46

Price Alert

In StockShips in as little as 1 business day Brand New

Related models

Cisco SN CheckSN verification before shipment.Verify authenticity3-Year WarrantyExtended, enterprise-gradeWarranty terms14-Day ReturnsStraightforward RMA processReturn policyExpress Shipping2-6 Business Daysvia UPS, FedEx, DHL and more

Trusted & Secure Payments

Shop Expert-Recommended Accessories for the C9300-24UXB-E

Explore optics, stacking accessories, modules, and power supplies—all verified by our engineers for use with this model.

SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMF
Original price was: $853.95.Current price is: $52.00.
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4
Original price was: $1,213.85.Current price is: $91.68.
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMF
Original price was: $2,439.88.Current price is: $150.00.
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km Reach
Original price was: $4,873.66.Current price is: $149.00.
SFP-25G-SR-S
25GBASE-SR SFP28 - 850nm MMF - 100m OM4
Original price was: $1,213.85.Current price is: $258.00.
SFP-10/25G-LR-S
10/25GBASE-LR SFP28 - 10 km G.652 SMF - 0 to 70°C Commercial Temperature
Original price was: $2,787.19.Current price is: $431.00.
QSFP-40G-SR4
40G SR4 QSFP - MPO-12 MMF - 4x10G Breakout
Original price was: $3,653.72.Current price is: $126.00.
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOM
Original price was: $1,260.58.Current price is: $95.80.
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m Reach
Original price was: $570.10.Current price is: $70.00.
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOM
Original price was: $633.46.Current price is: $59.00.
STACK-T1-50CM
50cm Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $121.99.Current price is: $90.00.
STACK-T1-1M
1m Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $252.03.Current price is: $140.00.
STACK-T1-3M
3m Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $378.07.Current price is: $257.00.
C9300-NM-2Y
2x25G/10G/1G SFP28 Ports - Catalyst 9300 Module
Original price was: $3,227.37.Current price is: $1,122.00.
C9300-NM-2Q
2x40G QSFP+ Uplinks - Catalyst 9300 Module
Original price was: $3,213.50.Current price is: $800.00.
C9300-NM-4G
4x1GE SFP Ports - Catalyst 9300 Module
Original price was: $680.51.Current price is: $231.00.
C9300-NM-4M
4x10G/mGig Copper Ports - Catalyst 9300 Module
Original price was: $1,890.30.Current price is: $626.00.
C9300-NM-8X
8x10G/1G SFP+ Uplinks - Network Module - Catalyst 9300
Original price was: $3,213.50.Current price is: $761.00.
PWR-C1-1100WAC-P
1100W AC PSU - Catalyst 9300 C1 - Platinum Rated
Original price was: $2,317.88.Current price is: $689.00.

Why Layer23-Switch

Stocked, Shipped and Supported by One Team

Founded

Customers

Units shipped

Countries

Inventory You Can See

Cisco stock on hand

Models ready to ship

Warehouse space

Ships in 1 Business Day

In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.

DHL FedEx UPS Duties included: US · CA · UK

LSCare Warranty

3years on enterprise equipment

Advance replacement for in-stock models
New unit for dead-on-arrival
14-day returns on sealed items

Free CCIE Support

Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.

Part number check Configuration Troubleshooting

Verify Before You Pay

100%factory-sealed

Get label and serial photos before shipment, and check every serial number with Cisco.

C9300-24UXB-E Description

The C9300-24UXB-E is a Cisco Catalyst 9300 Series higher-scale stackable access switch for campus wiring closets that serve multigigabit endpoints and need deeper address and route tables. The switch has 24 multigigabit UPOE ports, a modular uplink slot, 640 Gbps of switching capacity, a 560W default PoE budget, a 64 MB packet buffer and Network Essentials licensing. As a higher-scale model it stacks only with other higher-scale Catalyst 9300 switches, not with standard C9300 units.

Quick Specs

Parameter	Specification
Product ID	C9300-24UXB-E
Product type	Higher-scale stackable access switch with modular uplinks
Downlink ports	24 x 100M/1G/2.5G/5G/10G multigigabit Cisco UPOE copper ports
Scale profile	Catalyst 9300 higher-scale model
Packet buffer	64 MB for the 24-port Multigigabit higher-scale model
Network license	Network Essentials
Uplink architecture	Modular uplink slot for Cisco Catalyst 9300 network modules
Default power supply	PWR-C1-1100WAC-P
Default PoE budget	560W
Stacking and StackPower	StackWise-480 with StackPower support
Expanded PoE budget	1440W with supported secondary power supply configuration
Minimum software release	Cisco IOS XE Gibraltar 16.12.1 introduced this switch
Switching and forwarding	640 Gbps standalone switching; 476.19 Mpps standalone forwarding

Product Performance

C9300-24UXB-E packet buffer

IPv4 route scale

Default UPOE power budget

Key Features

Multigigabit UPOE Downlinks

All 24 copper ports negotiate 100M, 1G, 2.5G, 5G or 10G and deliver Cisco UPOE, so one port type serves Wi-Fi access points and high-draw endpoints.

64 MB Packet Buffer

The 24-port multigigabit higher-scale model carries a 64 MB buffer, which gives bursty multigigabit traffic more headroom than standard Catalyst 9300 multigigabit models.

Larger Forwarding Tables

The higher-scale group supports 64,000 MAC addresses, 112,000 IPv4 routes, 56,000 IPv6 routes and 18,000 QoS and ACL entries.

Network Essentials Feature Scope

The -E suffix covers Layer 2 and OSPF routed access, while VRF, VXLAN, TrustSec, BGP and MACsec-256 need Network Advantage.

Higher-Scale Stacking Boundary

StackWise-480 supports up to eight members, but higher-scale models stack only with other higher-scale models and not with standard C9300 switches.

Modular Uplink Slot

Uplink media comes from a separate Catalyst 9300 network module, with options from 1G SFP to 25G SFP28 and 40G QSFP, so the access ports do not fix the uplink speed.

Application Scenarios

Large Campus Access Closet

In a wiring closet that serves many Wi-Fi access points and multigigabit desktops, the switch uses its 64,000 MAC address table and 112,000 route capacity to hold a large number of attached clients.

Multigigabit UPOE Floor

A floor of high-draw endpoints such as PTZ cameras and multigigabit access points can run from the 24 UPOE ports, with a second supply added when the 560W default budget runs short.

Higher-Scale Stack Group

A building that already runs higher-scale Catalyst 9300 members can add this switch to the same stack, since higher-scale models stack only with each other.

Product Comparison

Parameter	C9300-24UXB-E	C9300-24UXB-A	C9300-24UX-E	C9300-24UB-E
Downlink ports	24 x 100M/1G/2.5G/5G/10G UPOE	24 x 100M/1G/2.5G/5G/10G UPOE	24 x 100M/1G/2.5G/5G/10G UPOE	24 x 10/100/1000 UPOE
Available PoE power (default)	560W	560W	560W	830W
Network module uplinks	Modular	Modular	Modular	Modular
Network license	Network Essentials	Network Advantage	Network Essentials	Network Essentials
Stack bandwidth	480 Gbps; higher-scale models only	480 Gbps; higher-scale models only	480 Gbps; standard C9300 models only	480 Gbps; higher-scale models only
Switching capacity	640 Gbps	640 Gbps	640 Gbps	208 Gbps
Packet buffer	64 MB	64 MB	32 MB	32 MB
MAC addresses	64,000	64,000	32,000	64,000
IPv4 routes	112,000	112,000	32,000	112,000

C9300-24UXB-E is the Network Essentials version of the higher-scale 24-port Multigigabit UPOE switch also sold as C9300-24UXB-A, and the license tier is the only difference. A design that needs VRF, VXLAN, TrustSec, BGP or MACsec-256 on day one must order C9300-24UXB-A, since the upgrade term C9300-24-E-A-3, -5 or -7 applies only to an installed switch. The 64 MB buffer, 64,000 MAC addresses and 112,000 routes separate it from C9300-24UX-E, which has 32,000 MAC addresses and 32,000 routes, but higher-scale members stack only with other higher-scale models. Gigabit UPOE access with 830W of default PoE moves to C9300-24UB-E.

PoE Power Planning

Planning Item	Cisco Confirmed Value	Order Impact
Default PoE budget	C9300-24UXB-E is listed with 560W available PoE and PWR-C1-1100WAC-P as the default supply	Check whether the powered endpoint count fits the base order before adding a secondary supply
Secondary supply options	The C9300-24UXB-E power table lists 910W with a 350W secondary supply, 1275W with a 715W secondary supply, and 1440W with an 1100W secondary supply	Decide whether the second supply is for redundancy, more PoE budget, or both
UPOE port class	Cisco UPOE ports support Type 1, Type 2, Type 3, and Cisco UPOE powered devices up to 60W per port	Avoid substituting a PoE+, UPOE+, or data-only model unless the endpoint power class changes
StackPower design	Catalyst 9300 modular-uplink switches support StackPower for shared stack power planning	Add StackPower cabling only when the site design uses shared power across stack members

Ordering Checklist

Software subscription: Order a 24-port Essentials term: C9300-DNA-E-24-3Y, C9300-DNA-E-24-5Y or C9300-DNA-E-24-7Y. The configurator defaults to Cisco DNA Advantage with a 5-year term, which does not match a Network Essentials switch.
Uplink module: Keep the default C9300-NM-8X, pick C9300-NM-4G, C9300-NM-4M, C9300-NM-2Q or C9300-NM-2Y, or select C9300-NM-NONE. The uplink slot takes Catalyst 9300 modules only; C9300X modules do not fit.
Second power supply: A second PWR-C1-1100WAC-P is selected by default and C9300-SPS-NONE removes it. A single supply leaves the PoE budget at 560W.
Stacking cables: The default 50 cm StackWise cable and 30 cm StackPower cable ship unless C9300-STACK-NONE and C9300-SPWR-NONE remove them. A stack with members in different rows needs longer cables, which the 50 cm default does not cover.
Power cords: Select the cord type for the destination country; two cords ship with the switch. The configurator defaults to North America cords.

Optional Add-ons

Model	Description
C9300-NM-4G	Catalyst 9300 4 x 1GE SFP network module
C9300-NM-8X	Catalyst 9300 8 x 10G/1G SFP+ network module
C9300-NM-2Q	Catalyst 9300 2 x 40GE QSFP network module
C9300-NM-2Y	Catalyst 9300 2 x 25G/10G/1G SFP28 network module
C9300-NM-4M	Catalyst 9300 4 x 10G/mGig copper network module
NM-BLANK-T1=	Cisco Catalyst Type 1 network module blank spare
C9300-DNX-E-24-3Y	C9300 Cisco Catalyst Essentials 24-port 3 Year Term license
C9300-DNX-E-24-5Y	C9300 Cisco Catalyst Essentials 24-port 5 Year Term license
C9300-DNX-E-24-7Y	C9300 Cisco Catalyst Essentials 24-port 7 Year Term license
PWR-C1-1100WAC-P=	1100W AC Platinum-rated power supply spare
STACK-T1-50CM=	Data stack 50 cm cable option for C9300 and C9300X SKUs
STACK-T1-1M=	Data stack 1 m cable option for C9300 and C9300X SKUs
STACK-T1-3M=	Data stack 3 m cable option for C9300 and C9300X SKUs

C9300-24UXB-E Switch Rear Panel

The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.

1	Ground connectors	7	StackPower connectors
2	USB3.0–SSD port	8	AC OK (input) status LED
3	BEACON LED	9	PS OK (output) status LED
4	CONSOLE (RJ-45 console port)	10	StackWise-480 port connectors
5	MGMT (RJ-45 10/100/1000 management port)	11	Power supply modules
6	Fan modules	–	–

Rear Panel of a Cisco Catalyst 9300 Series Switch

Components Delivered in the Shipping Box

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

1	Cisco Catalyst 9300 Series switch with optional network module¹ (power supply and fan modules not shown)	9	Eight number-8 Phillips flat-head screws
2	AC power cord	10	Cable guide
3	Product documentation and compliance document	11	M4.0 x 20mm Phillips pan-head screw
4	Four rubber mounting feet	12	(Optional) RJ-45 console cable
5	Ground lug screw and ring terminal	13	(Optional) USB console cable
6	Two 19-inch mounting brackets	14	(Optional) StackWise-480/1T cable (0.5-meter, 1-meter, or 3-meter)
7	Four number-12 pan-head screws	15	(Optional) StackPower cable (0.3-meter or 1.5-meter)
8	Four number-10 pan-head screws	16	(Optional) StackWise-320 cable

Specifications

Parameter	Specification	Parameter	Specification
Product ID	C9300-24UXB-E	Product type	Higher-scale stackable access switch with modular uplinks
Network license	Network Essentials	Downlink ports	24 x 100M/1G/2.5G/5G/10G multigigabit Cisco UPOE copper ports
Scale profile	Catalyst 9300 higher-scale model	Default power supply	PWR-C1-1100WAC-P
Default PoE budget	560W	PoE with 350W secondary supply	910W
PoE with 715W secondary supply	1275W	PoE with 1100W secondary supply	1440W maximum by port rating
Uplink architecture	Optional field-replaceable C9300 network module	Supported network modules	C9300-NM-4G, C9300-NM-8X, C9300-NM-2Q, C9300-NM-2Y, C9300-NM-4M
Stacking architecture	StackWise-480	Stack members	Higher-scale C9300 models only
Stack bandwidth	480 Gbps	StackPower	Supported
Software introduction	Cisco IOS XE Gibraltar 16.12.1 introduced C9300-24UXB-E	Packet buffer	64 MB
Flexible NetFlow entries	256,000 flows for higher-scale 24-port Multigigabit models	MAC addresses	64,000
IPv4 routes	112,000 total routes	IPv6 routes	56,000
Multicast routes	16,000	QoS entries	18,000
ACL entries	18,000	DRAM	8 GB
Flash	16 GB	VLAN IDs	4094
Jumbo frames	9198 bytes	Switching capacity	640 Gbps standalone
Switching capacity with stacking	1,120 Gbps	Forwarding rate	476.19 Mpps standalone
Forwarding rate with stacking	833.33 Mpps	Dimensions	1.73 x 17.5 x 20.2 in. (4.4 x 44.5 x 51.3 cm)
Power supply input	PWR-C1-1100WAC-P supports 115 to 240 VAC autoranging	UPOE support	Type 1, Type 2, Type 3, and Cisco UPOE powered devices up to 60W per port

Quality Certifications

Customer Reviews

Write A Review

4.9

Rated 4.92 out of 5

(13 reviews)

5 Stars

4 Stars

3 Stars

2 Stars

1 Stars

Daniel Wilson

Posted on 24/03/2026

Verified Buyer

Rated 5 out of 5

5.0

I needed confirmation that the product was current. They had the answer immediately.

Joseph Wright

Posted on 20/03/2026

Verified Buyer

Rated 5 out of 5

5.0

Exactly what we needed. No complaints.

Raymond Ortiz

Posted on 29/01/2026

Verified Buyer

Rated 5 out of 5

5.0

Excellent customer service mentality — applies before, during, and after the sale.

Legolas

Posted on 25/07/2025

Verified Buyer

Rated 5 out of 5

5.0

Your shipping speed is unmatched.

Aria Paxton

Posted on 28/03/2025

Verified Buyer

Rated 5 out of 5

5.0

UPOE+ drives access points and video bars without injectors.

Questions & Answers

Can C9300-24UXB-E be stacked?
Yes, but only with other higher-scale Catalyst 9300 models. C9300-24UXB-E stacks up to eight members over StackWise-480, and standard C9300 switches cannot join the stack. StackPower is supported across the stacked members.
What does Network Essentials on C9300-24UXB-E include?
Network Essentials on C9300-24UXB-E covers Layer 2 and OSPF routed access. VRF, VXLAN, TrustSec, BGP and MACsec-256 are not part of this tier. The -E suffix carries this tier on the switch.
Can the secondary supply in C9300-24UXB-E be the 1900W model?
Yes. PWR-C1-1900WAC-P is orderable on modular-uplink Catalyst 9300 switches and mixes with the other supplies, including the default PWR-C1-1100WAC-P. It delivers 1500W when fed at 115V and 1900W when fed at 230V, and it needs its own power cord, so check the cord type on the quote.
Is ThousandEyes bundled with an Essentials subscription for C9300-24UXB-E?
No. TE-EMBEDDED-T, the ThousandEyes Network and Application Synthetics license, ships by default only with 3, 5 or 7-year Cisco Catalyst or Cisco DNA Advantage subscriptions. A Network Essentials subscription for C9300-24UXB-E does not include it, so an Advantage tier is needed to get it.
How long do PoE endpoints on C9300-24UXB-E stay dark after a reboot?
Under 30 seconds when Fast PoE is set. Perpetual PoE covers an upgrade reload, a crash and a manual reboot, in a stack as well. Fast PoE restores endpoint power in under 30 seconds from stored power and needs perpetual-poe-ha on the port. Power loss and hibernation are not covered.
How many shared-power members can a StackPower ring hold when C9300-24UXB-E is one of them?
A StackPower ring supports up to four members sharing power. Adding the XPS 2200 expandable power system lets up to eight members share power. The ring cables are CAB-SPWR-30CM and CAB-SPWR-150CM. Fixed-uplink C9300L and C9300LM switches have no StackPower, so a C9300-24UXB-E stack stays on modular-uplink members.
Which license tier must the other stack members of C9300-24UXB-E run?
They must run the same license tier, Network Essentials, and the same IOS XE release as C9300-24UXB-E. Mixing an Advantage member into the stack is not allowed. All members use SSO and NSF, and only higher-scale models can be added, up to eight switches in one stack.
What QoS and ACL entry counts does C9300-24UXB-E support?
C9300-24UXB-E belongs to the higher-scale group, so it holds 18,000 security ACL entries and 18,000 QoS entries. Standard Catalyst 9300 switches hold 5,120 of each. These counts do not change between Network Essentials and Network Advantage, and NetFlow reaches 256,000 on this 24-port mGig model.

Warranty

100% Low Price Guarantee:

Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.

100% Quality Assurance:

All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.

Free CCIE Technical Support:

Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.

100% Money Back Guarantee:

If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.

Flexible & Secure Payment and Shipping:

We support multiple secure payment and logistics options, backed by industry-leading verification:

Visit How to Pay page for more information

Warranty Coverage & RMA Instructions

Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information

FREE NETWORK TOOLS

Verify, plan, and comparewith confidence

Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Check lifecycle dates

Cisco Switch Selector Tool

Filter Cisco switches by ports, uplinks, PoE, performance, features, license, and budget.

Find matching switches >

Cisco Serial Number Lookup

Verify authenticity and identify exactmodel, coverage, and lifecycle detailsusing a Cisco serial number.

Verify a serial number >

Product Comparison

Compare specifications, capabilitiesand form factors side-by-side tochoose the right hardware.

Cisco Compare products >

Item	Qty	Amount
C9300-24UXB-ENew, factory-sealed · 3-year warranty · In stock
C9300-DNA-ERequired with each C9300-24UXB-E

C9300-24UXB-E – 24x10G mGig UPOE Ports – Higher-Scale Buffer – 560W PoE Budget

Shop Expert-Recommended Accessories for the C9300-24UXB-E

Stocked, Shipped and Supported by One Team

Inventory You Can See

Ships in 1 Business Day

LSCare Warranty

Free CCIE Support

Verify Before You Pay

C9300-24UXB-E Description

Quick Specs

Product Performance

Key Features

Application Scenarios

Product Comparison

PoE Power Planning

Ordering Checklist

Optional Add-ons

C9300-24UXB-E Switch Rear Panel

Components Delivered in the Shipping Box

Specifications

Quality Certifications

Customer Reviews

Questions & Answers

Can C9300-24UXB-E be stacked?

What does Network Essentials on C9300-24UXB-E include?

Can the secondary supply in C9300-24UXB-E be the 1900W model?

Is ThousandEyes bundled with an Essentials subscription for C9300-24UXB-E?

How long do PoE endpoints on C9300-24UXB-E stay dark after a reboot?

How many shared-power members can a StackPower ring hold when C9300-24UXB-E is one of them?

Which license tier must the other stack members of C9300-24UXB-E run?

What QoS and ACL entry counts does C9300-24UXB-E support?

Warranty

Verify, plan, and comparewith confidence

Cisco Switch Selector Tool

Cisco Serial Number Lookup

Product Comparison

DataSheet Downloads

Related Searches of Catalyst 9300 Switches