Can C9300-48P-E be stacked?

Yes. C9300-48P-E stacks up to 8 members over StackWise-480 at 480 Gbps per stack. Members must be other C9300 modular-uplink models on the same license tier, and StackPower pools power across up to four members, or eight with XPS-2200.

What does Network Essentials on C9300-48P-E include?

Network Essentials on C9300-48P-E includes Layer 2 switching, OSPF routed access up to 1,000 routes, PVLAN, VRRP, 802.1X and MACsec-128. MACsec-256, Cisco TrustSec and VXLAN fall outside the tier, so the -E suffix suits routed access closets.

What PoE power level does C9300-48P-E source per port, and what reaches the device?

Each PoE+ port sources 30W under IEEE 802.3at Type 2, and the powered device receives 25.5W. Type 3 and Type 4 802.3bt devices need a UPOE or UPOE+ model, so keep C9300-48P-E for phones, access points and cameras that fit the 802.3at class.

Must an empty uplink slot on C9300-48P-E hold a blank module?

Yes. An empty network module slot needs a C9300-NM-BLANK installed to maintain proper airflow. If the order skips the uplink module, add the blank, and put it back whenever a module is pulled for service on C9300-48P-E.

What are the PWR-C1-1100WAC-P heat output and input range when fitted to C9300-48P-E?

PWR-C1-1100WAC-P is rated 1100W with roughly 3754-3793 BTU/hr of output. It takes 115-240VAC at 47-63Hz through an IEC 320-C16 inlet. Fitting it as the primary supply raises the available PoE budget on C9300-48P-E to 822W-1440W, per the Catalyst 9300 data sheet.

Does PWR-C1-1900WAC-P reach its full output on 115V in C9300-48P-E?

No. PWR-C1-1900WAC-P outputs up to 1900W on 230V input and is limited to 1500W on 115V input. Heat output is 6483 BTU/hr at 230V, so a 115V closet circuit caps the usable power for the PoE budget. The supply also needs its own power cord, so check the cord on the quote.

Is ThousandEyes bundled with an Essentials subscription for C9300-48P-E?

No. TE-EMBEDDED-T, the ThousandEyes Network and Application Synthetics license, ships by default only with 3, 5 or 7-year Cisco Catalyst or Cisco DNA Advantage subscriptions. A Network Essentials subscription for C9300-48P-E does not include it, so an Advantage tier is needed to get it.

Does C9300-48P-E support BGP, VXLAN or MPLS with its Network Essentials license?

No. BGP, VRF, VXLAN, LISP, TrustSec and MPLS come with Network Advantage, which adds them on top of Network Essentials. The same applies to the AVB, PTP and CoAP IoT protocols and to CLI software patching. Order the Network Advantage version of the switch when the closet needs any of these features.

How many VLAN IDs and routed ports does a stack with C9300-48P-E support?

C9300-48P-E supports 4094 VLAN IDs and 1000 SVIs, and a stack supports up to 448 routed ports. It also holds 300 PVST instances and 13,000 STP virtual ports. These limits are the same on Network Essentials as on Network Advantage, so the license tier does not change how many VLANs or routed interfaces a design can use.

Which spare fan module PID fits C9300-48P-E?

Yes. The three fan modules are field-replaceable and support N+1 redundancy. The spare fan module PID is FAN-T2= and its MTBF is 4,521,330 hours. A failed fan can be swapped in the closet without taking C9300-48P-E out of service.

C9300-48P-E – 48x1G PoE+ Ports – Modular Uplink – 437W PoE Budget – Network Essentials

Name: C9300-48P-E - Cisco 48-Port PoE+ Switch with Network Essentials
Brand: Cisco
SKU: C9300-48P-E
Price: 4269.44 USD
Availability: InStock
Rating: 4.94 (17 reviews)

Brand: Cisco Category: Catalyst 9300 Switches Availability:

In Stock

Model: C9300-48P-E

Cisco SN CheckSN verification before shipment.Verify authenticity3-Year WarrantyExtended, enterprise-gradeWarranty terms14-Day ReturnsStraightforward RMA processReturn policy

Rated 4.94 out of 5 based on 17 customer ratings

4.917 reviews10 Questions5 sold this month

List Price: ~~$15,376.80~~ 72% OFF

$4,269.44

Price Alert

Condition

Related

Subscription C9300-DNA-E + $321.36 Subtotal Price $4,590.80

Quantity

Shipping Express Shipping 2-6 Business Days, via UPS, FedEx, DHL and more

Trusted & Secure Payments

Shop Expert-Recommended Accessories for the C9300-48P-E

Explore optics, stacking accessories, modules, and power supplies—all verified by our engineers for use with this model.

SFP-10G-SR-S
10GBASE-SR SFP+ - S-Class - 400m OM4 MMF
Original price was: $853.95.Current price is: $52.00.
SFP-10G-SR
10GBASE-SR SFP+ - 850nm MMF - 400m OM4
Original price was: $1,213.85.Current price is: $91.68.
SFP-10G-LR-S
10GBASE-LR SFP+ - S-Class - 10km SMF
Original price was: $2,439.88.Current price is: $150.00.
SFP-10G-LR
10GBASE-LR SFP+ - 1310nm SMF - 10km Reach
Original price was: $4,873.66.Current price is: $149.00.
SFP-25G-SR-S
25GBASE-SR SFP28 - 850nm MMF - 100m OM4
Original price was: $1,213.85.Current price is: $258.00.
SFP-10/25G-LR-S
10/25GBASE-LR SFP28 - 10 km G.652 SMF - 0 to 70°C Commercial Temperature
Original price was: $2,787.19.Current price is: $431.00.
QSFP-40G-SR4
40G SR4 QSFP - MPO-12 MMF - 4x10G Breakout
Original price was: $3,653.72.Current price is: $126.00.
GLC-LH-SMD
1000BASE-LX/LH SFP - 10km SMF / 550m MMF - DOM
Original price was: $1,260.58.Current price is: $95.80.
GLC-TE
1000BASE-T SFP - RJ-45 Cat5 Copper - 100m Reach
Original price was: $570.10.Current price is: $70.00.
GLC-SX-MMD
1000BASE-SX SFP - MMF 850nm - DOM
Original price was: $633.46.Current price is: $59.00.
STACK-T1-50CM
50cm Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $121.99.Current price is: $90.00.
STACK-T1-1M
1m Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $252.03.Current price is: $140.00.
STACK-T1-3M
3m Type 1 StackWise Cable - C9300/C9300X Data Stack - 480G/1T
Original price was: $378.07.Current price is: $257.00.
C9300-NM-2Y
2x25G/10G/1G SFP28 Ports - Catalyst 9300 Module
Original price was: $3,227.37.Current price is: $1,122.00.
C9300-NM-2Q
2x40G QSFP+ Uplinks - Catalyst 9300 Module
Original price was: $3,213.50.Current price is: $800.00.
C9300-NM-4G
4x1GE SFP Ports - Catalyst 9300 Module
Original price was: $680.51.Current price is: $231.00.
C9300-NM-4M
4x10G/mGig Copper Ports - Catalyst 9300 Module
Original price was: $1,890.30.Current price is: $626.00.
C9300-NM-8X
8x10G/1G SFP+ Uplinks - Network Module - Catalyst 9300
Original price was: $3,213.50.Current price is: $761.00.
PWR-C1-715WAC-P
715W AC PSU - Catalyst 9300 C1 - Platinum Rated
Original price was: $1,479.00.Current price is: $403.00.
PWR-C1-1100WAC-P
1100W AC PSU - Catalyst 9300 C1 - Platinum Rated
Original price was: $2,317.88.Current price is: $689.00.

Why Layer23-Switch

Stocked, Shipped and Supported by One Team

Founded

Customers

Units shipped

Countries

Inventory You Can See

Cisco stock on hand

Models ready to ship

Warehouse space

Ships in 1 Business Day

In-stock orders leave our Hong Kong or U.S. warehouse within 1 business day after payment, with tracking by email.

DHL FedEx UPS Duties included: US · CA · UK

LSCare Warranty

3years on enterprise equipment

Advance replacement for in-stock models
New unit for dead-on-arrival
14-day returns on sealed items

Free CCIE Support

Certified engineers help before and after you buy. Reply within 1 business day by email or live chat.

Part number check Configuration Troubleshooting

Verify Before You Pay

100%factory-sealed

Get label and serial photos before shipment, and check every serial number with Cisco.

C9300-48P-E Description

The C9300-48P-E is a Cisco Catalyst 9300 Series stackable access switch for wiring closets that power IP phones, access points and cameras over PoE+. The switch has 48 10/100/1000 PoE+ ports with a 437W default PoE budget, a modular uplink slot and 256 Gbps of switching capacity, with Network Essentials built in. The -E suffix covers Layer 2 and OSPF routing up to 1,000 routes but not VXLAN, Cisco TrustSec or MACsec-256.

Quick Specs

Parameter	Specification
Product ID	C9300-48P-E
Total ports	48x 10/100/1000 Mbps copper
PoE support	Cisco PoE+
Default PoE budget	437W (with PWR-C1-715WAC-P)
Extended PoE budget	Up to 1440W with a second 1100W or 1900W supply installed
Uplinks	Modular uplink network module slot
Network license	Network Essentials
Stacking	StackWise-480, up to 8 members
StackPower	Supported (up to 4-member ring, 8 with XPS-2200)
Default power supply	PWR-C1-715WAC-P (715W AC)
Power redundancy	Dual power supply slots, second supply optional
Fan modules	3x field-replaceable, N+1 redundant
Minimum software release	Cisco IOS XE Release 16.5.1a

Product Performance

Switching Bandwidth

Forwarding Rate

Stacked Switching Bandwidth (StackWise-480, 8 Members)

Key Features

PoE+ Budget On The Default Supply

The default 715W supply leaves 437W for PoE, about 9W per port if all 48 ports draw power at once. Phones and access points fit comfortably; a full 30W on every port does not.

Second Supply Raises PoE To 1440W

A second 1100W or 1900W supply raises the budget to 1440W, which covers 30W on all 48 ports. A primary 1100W supply alone gives 822W to 1440W.

Modular Uplink Slot

The slot takes hot-swappable network modules: C9300-NM-8X (eight 10G/1G SFP+), C9300-NM-2Q (two 40G QSFP+), C9300-NM-2Y (two 25G SFP28), C9300-NM-4M (four Multigigabit) or C9300-NM-4G (four 1G SFP). Uplink speed changes by swapping the module, not the switch.

StackWise-480 With StackPower

Up to eight switches stack at 480 Gbps over StackWise cables, and only with other C9300 modular-uplink models on the same license tier. StackPower pools power across up to four members, or eight with XPS-2200.

Network Essentials Scope

Essentials covers Layer 2, routed access with OSPF up to 1,000 routes, PVLAN, VRRP, 802.1X and MACsec-128. BGP, VXLAN, MPLS and MACsec-256 sit outside the tier.

Rear USB 3.0 SSD Bay

A rear bay takes a 120 GB or 240 GB USB 3.0 SSD module for local storage and packet capture, so closet troubleshooting does not need a separate capture appliance.

Application Scenarios

Office Floor Wiring Closet

On an office floor, the switch powers IP phones and Wi-Fi access points from its PoE+ ports and carries their traffic to the distribution layer over the uplink module.

School Building Access

A school building can route between classroom VLANs at the access layer with OSPF and authenticate student and staff devices with 802.1X.

Camera Aggregation Closet

A closet that collects PoE+ security cameras from a warehouse or parking structure can power them from the switch and send the video streams upstream over a fiber uplink module.

Product Comparison

Parameter	C9300-48P-E	C9300-48T-E	C9300-48H-E
Total 10/100/1000 ports	48	48	48
Power over Ethernet	PoE+	Data only	Cisco UPOE+
Default power supply	PWR-C1-715WAC-P	PWR-C1-350WAC-P	PWR-C1-1100WAC-P
Available PoE with default power supply	437W	Not applicable	822W
Maximum available PoE power	1440W	Not applicable	2880W
Uplink	Modular	Modular	Modular
Network license	Network Essentials	Network Essentials	Network Essentials
Stack bandwidth	480 Gbps	480 Gbps	480 Gbps
Switching capacity	256 Gbps	256 Gbps	256 Gbps

C9300-48P-E is the PoE+ model of this group: its 48 copper ports share a 437W budget on the default 715W supply, while C9300-48T-E has the same chassis and modular uplink on a 350W supply with no PoE, which suits closets without powered devices. Closets with endpoints above the 30W PoE+ class need C9300-48H-E, which supplies Cisco UPOE+ with an 822W default budget on an 1100W supply. Network Essentials covers Layer 2 and OSPF up to 1,000 routes; when VXLAN, Cisco TrustSec or MACsec-256 is needed on day one, order C9300-48P-A, or upgrade an installed switch later with a C9300-LIC= term (C9300-48-E-A-3, -5 or -7), which cannot be placed on the switch order.

PoE Power Planning

Planning Item	Value or Check
Default PoE budget	437W with the default PWR-C1-715WAC-P supply
Extended PoE budget	Up to 1440W with a second 1100W or 1900W supply installed, subject to port-count limits
PoE standard supported	Cisco PoE+ (IEEE 802.3at class)
Power supply slots	2 internal slots; unused slot needs a blank module for airflow
Device count check	Confirm total connected PD wattage against the 437W default budget before adding endpoints
Stacking power note	StackPower can share power across stack members but does not replace confirming per-unit PoE budget

Ordering Checklist

Subscription tier: Order a 48-port Essentials term: C9300-DNA-E-48 (Cisco DNA) or C9300-DNX-E-48-3Y/5Y/7Y (Cisco Catalyst). The configurator defaults to Advantage, which does not match a Network Essentials switch on a new order.
Uplink module: Keep the default C9300-NM-8X, change it to another C9300-NM module, or select C9300-NM-NONE. The uplink slot must hold a module or be ordered empty, and the module is part of the switch order.
Second power supply: A second PWR-C1-715WAC-P is selected by default and C9300-SPS-NONE removes it. The second supply stays on the order unless removed, and a single-supply closet runs on the primary supply’s PoE budget.
Stacking cables: The default 50 cm StackWise cable (C9300-STACK-NONE removes it) and default 30 cm StackPower cable (C9300-SPWR-NONE removes it) are both added by default. A standalone switch uses neither.
Power cords: Select the cord type for the destination country; two cords ship with the order. The configurator defaults to North America cords.

Optional Add-ons

Model	Description
C9300-NM-8X	Catalyst 9300 8x 10G/1G SFP+ Network Module for the C9300-48P-E modular uplink bay.
C9300-NM-2Q	Catalyst 9300 2x 40G QSFP+ Network Module for the C9300-48P-E modular uplink bay.
PWR-C1-1100WAC-P	Second PWR-C1-1100WAC-P power supply, raising available PoE budget from 437W toward the 1440W port-limited maximum.
FAN-T2=	Spare field-replaceable fan module for the Catalyst 9300 chassis, supporting N+1 fan redundancy.

C9300-48P-E Switch Rear Panel

The switch rear panel includes StackWise connectors, StackPower or XPS connectors, ports, fan modules, and power supply modules.

1	Ground connectors	7	StackPower connectors
2	USB3.0–SSD port	8	AC OK (input) status LED
3	BEACON LED	9	PS OK (output) status LED
4	CONSOLE (RJ-45 console port)	10	StackWise-480 port connectors
5	MGMT (RJ-45 10/100/1000 management port)	11	Power supply modules
6	Fan modules	–	–

Rear Panel of a Cisco Catalyst 9300 Series Switch

Components Delivered in the Shipping Box

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

1	Cisco Catalyst 9300 Series switch with optional network module¹ (power supply and fan modules not shown)	9	Eight number-8 Phillips flat-head screws
2	AC power cord	10	Cable guide
3	Product documentation and compliance document	11	M4.0 x 20mm Phillips pan-head screw
4	Four rubber mounting feet	12	(Optional) RJ-45 console cable
5	Ground lug screw and ring terminal	13	(Optional) USB console cable
6	Two 19-inch mounting brackets	14	(Optional) StackWise-480/1T cable (0.5-meter, 1-meter, or 3-meter)
7	Four number-12 pan-head screws	15	(Optional) StackPower cable (0.3-meter or 1.5-meter)
8	Four number-10 pan-head screws	16	(Optional) StackWise-320 cable

Specifications

Parameter	Specification	Parameter	Specification
Product ID	C9300-48P-E	Network license	Network Essentials
Total ports	48x 10/100/1000 Mbps copper	PoE standards	Cisco PoE+
Default PoE budget	437W (PWR-C1-715WAC-P)	Maximum PoE budget with secondary supply	Up to 1440W with second 1100W/1900W supply
Uplinks	Modular uplink network module slot	Stacking	StackWise-480, up to 8 members, 480 Gbps/stack
StackPower	Supported, up to 4-member ring (8 with XPS-2200)	Switching capacity	256 Gbps standalone / 736 Gbps stacked
Forwarding rate	190.48 Mpps standalone / 547.62 Mpps stacked	MAC addresses	32,000 entries
IPv4 routes	32,000 (24,000 connected + 8,000 indirect)	IPv6 routes	16,000 entries
Multicast routes	8,000 entries	QoS / ACL entries	5,120 QoS / 5,120 ACL entries
VLAN IDs	4094	SVIs	1000
Jumbo frames	9198 bytes	DRAM / flash	8 GB DRAM / 16 GB Flash
Default power supply	PWR-C1-715WAC-P, 715W AC, 2,440 BTU/hr output	Power redundancy	2 internal supply slots, dual redundant supported
Fan modules	3x field-replaceable, N+1 redundant (FAN-T2=)	Peak power draw (100% PoE, 115VAC)	563.2W with no module / 568.8W with C9300-NM-8X
Chassis dimensions (default supply)	1.73 x 17.5 x 17.7 in	Unit weight (default supply)	7.59 kg (16.73 lb)
MTBF	277,770 hours	Minimum software release	Cisco IOS XE Release 16.5.1a
Operating temperature	-5°C to 45°C (23°F to 113°F) up to 5000 ft (1500 m); -5°C to 40°C (23°F to 104°F) up to 10,000 ft (3000 m)	Storage temperature	-40C to 70C
Operating humidity	5%-90% non-condensing	Operating / storage altitude	10,000 ft / 15,000 ft
Acoustic noise (24 PoE+ ports loaded)	45 dB typical / 48 dB max LpA	Management interfaces	RJ-45 Ethernet mgmt, RJ-45 console, USB mini-Type B console
Connector types	RJ-45 (1000BASE-T), LC (SFP/SFP+)	Standards supported	IEEE 802.1x, 802.3af/at, 802.1Q, 802.3az; RMON I/II; SNMPv1/v2c/v3
Safety certifications	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, AS/NZS 60950.1	EMC certifications	FCC Part 15, EN 55032/CISPR 32 Class A, EN 55035, ICES-003 Class A
Environmental compliance	RoHS 5

Quality Certifications

Customer Reviews

Write A Review

4.9

Rated 4.94 out of 5

(17 reviews)

5 Stars

4 Stars

3 Stars

2 Stars

1 Stars

Danielle Foster

Posted on 16/04/2026

Verified Buyer

Rated 5 out of 5

5.0

Quality consistency across multiple orders has been impressive.

Heather Vasquez

Posted on 28/03/2026

Verified Buyer

Rated 5 out of 5

5.0

Our supply chain team compared it to a direct-buy unit. Identical in every way.

Nancy Williams

Posted on 24/12/2025

Verified Buyer

Rated 5 out of 5

5.0

Loyalty has to be earned. Layer23 earned ours through consistent quality.

IT Manager

Posted on 20/09/2025

Verified Buyer

Rated 5 out of 5

5.0

Genuine equipment. Seals intact.

Marty McFly

Posted on 30/08/2025

Verified Buyer

Rated 5 out of 5

5.0

Got here so fast, it’s like you have a time machine.

Questions & Answers

Can C9300-48P-E be stacked?
Yes. C9300-48P-E stacks up to 8 members over StackWise-480 at 480 Gbps per stack. Members must be other C9300 modular-uplink models on the same license tier, and StackPower pools power across up to four members, or eight with XPS-2200.
What does Network Essentials on C9300-48P-E include?
Network Essentials on C9300-48P-E includes Layer 2 switching, OSPF routed access up to 1,000 routes, PVLAN, VRRP, 802.1X and MACsec-128. MACsec-256, Cisco TrustSec and VXLAN fall outside the tier, so the -E suffix suits routed access closets.
What PoE power level does C9300-48P-E source per port, and what reaches the device?
Each PoE+ port sources 30W under IEEE 802.3at Type 2, and the powered device receives 25.5W. Type 3 and Type 4 802.3bt devices need a UPOE or UPOE+ model, so keep C9300-48P-E for phones, access points and cameras that fit the 802.3at class.
Must an empty uplink slot on C9300-48P-E hold a blank module?
Yes. An empty network module slot needs a C9300-NM-BLANK installed to maintain proper airflow. If the order skips the uplink module, add the blank, and put it back whenever a module is pulled for service on C9300-48P-E.
What are the PWR-C1-1100WAC-P heat output and input range when fitted to C9300-48P-E?
PWR-C1-1100WAC-P is rated 1100W with roughly 3754-3793 BTU/hr of output. It takes 115-240VAC at 47-63Hz through an IEC 320-C16 inlet. Fitting it as the primary supply raises the available PoE budget on C9300-48P-E to 822W-1440W, per the Catalyst 9300 data sheet.
Does PWR-C1-1900WAC-P reach its full output on 115V in C9300-48P-E?
No. PWR-C1-1900WAC-P outputs up to 1900W on 230V input and is limited to 1500W on 115V input. Heat output is 6483 BTU/hr at 230V, so a 115V closet circuit caps the usable power for the PoE budget. The supply also needs its own power cord, so check the cord on the quote.
Is ThousandEyes bundled with an Essentials subscription for C9300-48P-E?
No. TE-EMBEDDED-T, the ThousandEyes Network and Application Synthetics license, ships by default only with 3, 5 or 7-year Cisco Catalyst or Cisco DNA Advantage subscriptions. A Network Essentials subscription for C9300-48P-E does not include it, so an Advantage tier is needed to get it.
Does C9300-48P-E support BGP, VXLAN or MPLS with its Network Essentials license?
No. BGP, VRF, VXLAN, LISP, TrustSec and MPLS come with Network Advantage, which adds them on top of Network Essentials. The same applies to the AVB, PTP and CoAP IoT protocols and to CLI software patching. Order the Network Advantage version of the switch when the closet needs any of these features.
How many VLAN IDs and routed ports does a stack with C9300-48P-E support?
C9300-48P-E supports 4094 VLAN IDs and 1000 SVIs, and a stack supports up to 448 routed ports. It also holds 300 PVST instances and 13,000 STP virtual ports. These limits are the same on Network Essentials as on Network Advantage, so the license tier does not change how many VLANs or routed interfaces a design can use.
Which spare fan module PID fits C9300-48P-E?
Yes. The three fan modules are field-replaceable and support N+1 redundancy. The spare fan module PID is FAN-T2= and its MTBF is 4,521,330 hours. A failed fan can be swapped in the closet without taking C9300-48P-E out of service.

Warranty

100% Low Price Guarantee:

Layer23-Switch.com offers genuine, high-quality ICT products at competitive wholesale prices—ensuring exceptional value without compromising quality.

100% Quality Assurance:

All items are brand new, original, and factory-sealed.
Upon request, each unit can be fully tested and verified by a Cisco CCIE-certified engineer to ensure perfect working condition before shipment.

Free CCIE Technical Support:

Our Cisco CCIE-certified experts provide free professional support via phone, email, online chat, or remote login—helping you deploy and troubleshoot with confidence.

100% Money Back Guarantee:

If you are not satisfied with your purchase, you may request an exchange or full refund. Our customer service team will guide you through the return process quickly and smoothly. Visit Return Policy page for more information.

Flexible & Secure Payment and Shipping:

We support multiple secure payment and logistics options, backed by industry-leading verification:

Visit How to Pay page for more information

Warranty Coverage & RMA Instructions

Extended, Worry-Free Warranty Coverage Factory New Sealed Enterprise Hardware:
· 3 Years Factory New Sealed
Visit Warranty Policy page for more information

FREE NETWORK TOOLS

Verify, plan, and comparewith confidence

Use practical tools to check device details, review lifecyclemilestones, and compare hardware before you buy.

Check lifecycle dates

Cisco Switch Selector Tool

Filter Cisco switches by ports, uplinks, PoE, performance, features, license, and budget.

Find matching switches >

Cisco Serial Number Lookup

Verify authenticity and identify exactmodel, coverage, and lifecycle detailsusing a Cisco serial number.

Verify a serial number >

Product Comparison

Compare specifications, capabilitiesand form factors side-by-side tochoose the right hardware.

Cisco Compare products >

Item	Qty	Amount
C9300-48P-ENew, factory-sealed · 3-year warranty · In stock
C9300-DNA-ERequired with each C9300-48P-E

C9300-48P-E – 48x1G PoE+ Ports – Modular Uplink – 437W PoE Budget – Network Essentials

Shop Expert-Recommended Accessories for the C9300-48P-E

Stocked, Shipped and Supported by One Team

Inventory You Can See

Ships in 1 Business Day

LSCare Warranty

Free CCIE Support

Verify Before You Pay

C9300-48P-E Description

Quick Specs

Product Performance

Key Features

Application Scenarios

Product Comparison

PoE Power Planning

Ordering Checklist

Optional Add-ons

C9300-48P-E Switch Rear Panel

Components Delivered in the Shipping Box

Specifications

Quality Certifications

Customer Reviews

Questions & Answers

Can C9300-48P-E be stacked?

What does Network Essentials on C9300-48P-E include?

What PoE power level does C9300-48P-E source per port, and what reaches the device?

Must an empty uplink slot on C9300-48P-E hold a blank module?

What are the PWR-C1-1100WAC-P heat output and input range when fitted to C9300-48P-E?

Does PWR-C1-1900WAC-P reach its full output on 115V in C9300-48P-E?

Is ThousandEyes bundled with an Essentials subscription for C9300-48P-E?

Does C9300-48P-E support BGP, VXLAN or MPLS with its Network Essentials license?

How many VLAN IDs and routed ports does a stack with C9300-48P-E support?

Which spare fan module PID fits C9300-48P-E?

Warranty

Verify, plan, and comparewith confidence

Cisco Switch Selector Tool

Cisco Serial Number Lookup

Product Comparison

DataSheet Downloads

Related Searches of Catalyst 9300 Switches